diff -Naur osmo-0.2.12-p1/aclocal.m4 osmo-0.2.12-p2/aclocal.m4 --- osmo-0.2.12-p1/aclocal.m4 2022-01-16 19:38:24.383637137 +0800 +++ osmo-0.2.12-p2/aclocal.m4 2022-01-16 19:43:37.936979540 +0800 @@ -1,8 +1,7 @@ -# generated automatically by aclocal 1.11.6 -*- Autoconf -*- +# generated automatically by aclocal 1.16.1 -*- Autoconf -*- + +# Copyright (C) 1996-2018 Free Software Foundation, Inc. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, -# Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,33 +11,31 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically `autoreconf'.])]) +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) -# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 2002-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 1 - # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.11' +[am__api_version='1.16' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.11.6], [], +m4_if([$1], [1.16.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -54,24 +51,22 @@ # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.11.6])dnl +[AM_AUTOMAKE_VERSION([1.16.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 1 - # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and @@ -90,7 +85,7 @@ # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you +# harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, @@ -108,30 +103,26 @@ # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` +[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 -# Free Software Foundation, Inc. +# Copyright (C) 1997-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 9 - # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl @@ -150,16 +141,14 @@ Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009, -# 2010, 2011 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 12 -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing @@ -169,7 +158,7 @@ # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was @@ -182,12 +171,13 @@ AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], UPC, [depcc="$UPC" am_compiler_list=], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], @@ -195,8 +185,8 @@ # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're @@ -236,16 +226,16 @@ : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - # We check with `-c' and `-o' for the sake of the "dashmstdout" + # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in @@ -254,8 +244,8 @@ test "$am__universal" = false || continue ;; nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else @@ -263,7 +253,7 @@ fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has + # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} @@ -311,7 +301,7 @@ # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl @@ -321,9 +311,13 @@ # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' @@ -338,67 +332,54 @@ # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -#serial 5 - # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ - # Autoconf 2.62 quotes --file arguments for eval, but not when files + # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + AS_CASE([$CONFIG_FILES], + [*\'*], [eval set x "$CONFIG_FILES"], + [*], [set x $CONFIG_FILES]) shift - for mf + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf do # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line + am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`AS_DIRNAME(["$am_mf"])` + am_filepart=`AS_BASENAME(["$am_mf"])` + AM_RUN_LOG([cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles]) || am_rc=$? done + if test $am_rc -ne 0; then + AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking).]) + fi + AS_UNSET([am_dirpart]) + AS_UNSET([am_filepart]) + AS_UNSET([am_mf]) + AS_UNSET([am_rc]) + rm -f conftest-deps.mk } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS @@ -407,29 +388,31 @@ # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. +# This code is only required when automatic dependency tracking is enabled. +# This creates each '.Po' and '.Plo' makefile fragment that we'll need in +# order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) + [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])]) # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 16 - # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. +dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. +m4_define([AC_PROG_CC], +m4_defn([AC_PROG_CC]) +[_AM_PROG_CC_C_O +]) + # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- @@ -442,7 +425,7 @@ # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.62])dnl +[AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl @@ -471,33 +454,42 @@ # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl @@ -506,34 +498,82 @@ [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl -]) -_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl -dnl The `parallel-tests' driver may need to know about EXEEXT, so add the -dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro -dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. ]) -dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. @@ -555,21 +595,18 @@ done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation, -# Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 1 - # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -577,16 +614,14 @@ install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi -AC_SUBST(install_sh)]) +AC_SUBST([install_sh])]) -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2003-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 2 - # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], @@ -602,67 +637,55 @@ # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 - # AM_MAKE_INCLUDE() # ----------------- -# Check to see how make treats includes. +# Check whether make has an 'include' directive that can support all +# the idioms we need for our automatic dependency tracking code. AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' +[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive]) +cat > confinc.mk << 'END' am__doit: - @echo this is the am__doit target + @echo this is the am__doit target >confinc.out .PHONY: am__doit END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) + AS_CASE([$?:`cat confinc.out 2>/dev/null`], + ['0:this is the am__doit target'], + [AS_CASE([$s], + [BSD], [am__include='.include' am__quote='"'], + [am__include='include' am__quote=''])]) + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +AC_MSG_RESULT([${_am_result}]) +AC_SUBST([am__include])]) +AC_SUBST([am__quote])]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. +# Copyright (C) 1997-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 6 - # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], @@ -670,11 +693,10 @@ $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) - # AM_MISSING_HAS_RUN # ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl @@ -687,54 +709,22 @@ esac fi # Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " else am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) + AC_MSG_WARN(['missing' script is too old or missing]) fi ]) -# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation, -# Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 1 - -# AM_PROG_MKDIR_P -# --------------- -# Check for `mkdir -p'. -AC_DEFUN([AM_PROG_MKDIR_P], -[AC_PREREQ([2.60])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -dnl while keeping a definition of mkdir_p for backward compatibility. -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -dnl Makefile.ins that do not define MKDIR_P, so we do our own -dnl adjustment using top_builddir (which is defined more often than -dnl MKDIR_P). -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -case $mkdir_p in - [[\\/$]]* | ?:[[\\/]]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac -]) - # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software -# Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 5 - # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], @@ -744,7 +734,7 @@ # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ @@ -758,24 +748,82 @@ AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# Check to make sure that the build environment is sane. -*- Autoconf -*- +# Copyright (C) 1999-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 -# Free Software Foundation, Inc. +# _AM_PROG_CC_C_O +# --------------- +# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC +# to automatically call this. +AC_DEFUN([_AM_PROG_CC_C_O], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) + +# For backward compatibility. +AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) + +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 5 +# AM_RUN_LOG(COMMAND) +# ------------------- +# Run COMMAND, save the exit status in ac_status, and log it. +# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +AC_DEFUN([AM_RUN_LOG], +[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' @@ -786,81 +834,106 @@ esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : +AC_MSG_RESULT([yes]) +]) + +# Copyright (C) 2009-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi -AC_MSG_RESULT(yes)]) +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) -# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 1 - # AM_PROG_INSTALL_STRIP # --------------------- -# One issue with vendor `install' (even GNU) is that you can't +# One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize +# always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc. +# Copyright (C) 2006-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 - # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. @@ -874,18 +947,16 @@ # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc. +# Copyright (C) 2004-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 2 - # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory @@ -895,76 +966,114 @@ # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar +# AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. + +# We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi -done -rm -rf conftest.dir -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR diff -Naur osmo-0.2.12-p1/autom4te.cache/output.0 osmo-0.2.12-p2/autom4te.cache/output.0 --- osmo-0.2.12-p1/autom4te.cache/output.0 2022-01-16 19:38:24.936970485 +0800 +++ osmo-0.2.12-p2/autom4te.cache/output.0 2022-01-16 19:43:38.750312897 +0800 @@ -648,7 +648,6 @@ AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE -am__quote am__include DEPDIR OBJEXT @@ -659,6 +658,10 @@ CFLAGS CC PKG_CONFIG +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V am__untar am__tar AMTAR @@ -719,10 +722,12 @@ PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR -SHELL' +SHELL +am__quote' ac_subst_files='' ac_user_opts=' enable_option_checking +enable_silent_rules with_contacts with_tasks with_notes @@ -1377,8 +1382,12 @@ --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build --disable-gtktest do not try to compile and run a test GTK+ program --disable-xmltest Do not try to compile and run a test LIBXML program --enable-debug=yes,no compile with debugging support (default: no) @@ -2270,7 +2279,7 @@ -am__api_version='1.11' +am__api_version='1.16' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do @@ -2396,9 +2405,6 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' @@ -2409,43 +2415,12 @@ esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } + test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. @@ -2456,8 +2431,8 @@ ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in @@ -2468,15 +2443,15 @@ esac fi # Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " else am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -2485,10 +2460,10 @@ esac fi -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. +# will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. @@ -2627,12 +2602,6 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. @@ -2715,6 +2684,45 @@ fi rmdir .tst 2>/dev/null +@%:@ Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." @@ -2765,12 +2773,22 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' + am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' @@ -2778,6 +2796,49 @@ +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + ac_config_headers="$ac_config_headers config.h" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for type of build" >&5 @@ -3723,49 +3784,108 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" - -am_make=${MAKE-make} -cat > confinc << 'END' +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 +$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; } +cat > confinc.mk << 'END' am__doit: - @echo this is the am__doit target + @echo this is the am__doit target >confinc.out .PHONY: am__doit END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 + (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + case $?:`cat confinc.out 2>/dev/null` in @%:@( + '0:this is the am__doit target') : + case $s in @%:@( + BSD) : + am__include='.include' am__quote='"' ;; @%:@( + *) : + am__include='include' am__quote='' ;; +esac ;; @%:@( + *) : ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf +esac + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 +$as_echo "${_am_result}" >&6; } @%:@ Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : @@ -3798,8 +3918,8 @@ # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're @@ -3834,16 +3954,16 @@ : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - # We check with `-c' and `-o' for the sake of the "dashmstdout" + # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in @@ -3852,8 +3972,8 @@ test "$am__universal" = false || continue ;; nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else @@ -3861,7 +3981,7 @@ fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has + # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} @@ -6894,7 +7014,7 @@ # # INIT-COMMANDS # -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}" _ACEOF @@ -7515,32 +7635,38 @@ case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files + # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + case $CONFIG_FILES in @%:@( + *\'*) : + eval set x "$CONFIG_FILES" ;; @%:@( + *) : + set x $CONFIG_FILES ;; @%:@( + *) : + ;; +esac shift - for mf + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf do # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line + am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`$as_dirname -- "$am_mf" || +$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$am_mf" : 'X\(//\)[^/]' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$am_mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -7558,55 +7684,48 @@ q } s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ + am_filepart=`$as_basename -- "$am_mf" || +$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$am_mf" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } - /^X\(\/\/\)$/{ + /^X\/\(\/\/\)$/{ s//\1/ q } - /^X\(\/\).*/{ + /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done + { echo "$as_me:$LINENO: cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles" >&5 + (cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } || am_rc=$? done + if test $am_rc -ne 0; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking). +See \`config.log' for more details" "$LINENO" 5; } + fi + { am_dirpart=; unset am_dirpart;} + { am_filepart=; unset am_filepart;} + { am_mf=; unset am_mf;} + { am_rc=; unset am_rc;} + rm -f conftest-deps.mk } ;; diff -Naur osmo-0.2.12-p1/autom4te.cache/output.1 osmo-0.2.12-p2/autom4te.cache/output.1 --- osmo-0.2.12-p1/autom4te.cache/output.1 1970-01-01 08:00:00.000000000 +0800 +++ osmo-0.2.12-p2/autom4te.cache/output.1 2022-01-16 19:43:37.923646207 +0800 @@ -0,0 +1,7806 @@ +@%:@! /bin/sh +@%:@ Guess values for system-dependent variables and create Makefiles. +@%:@ Generated by GNU Autoconf 2.69 for Osmo 0.2.12. +@%:@ +@%:@ Report bugs to . +@%:@ +@%:@ +@%:@ Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@%:@ +@%:@ +@%:@ This configure script is free software; the Free Software Foundation +@%:@ gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in @%:@( + *posix*) : + set -o posix ;; @%:@( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +as_echo='printf %s\n' +as_echo_n='printf %s' + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in @%:@(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in @%:@ (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in @%:@( + *posix*) : + set -o posix ;; @%:@( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in @%:@( + /*) + for as_base in bash sh ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in @%:@ (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and pasp@users.sf.net +$0: about your system, including any error possibly output +$0: before this message. Then install a modern shell, or +$0: manually run the script under such a shell if you do +$0: have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +@%:@ as_fn_unset VAR +@%:@ --------------- +@%:@ Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +@%:@ as_fn_set_status STATUS +@%:@ ----------------------- +@%:@ Set @S|@? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} @%:@ as_fn_set_status + +@%:@ as_fn_exit STATUS +@%:@ ----------------- +@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} @%:@ as_fn_exit + +@%:@ as_fn_mkdir_p +@%:@ ------------- +@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} @%:@ as_fn_mkdir_p + +@%:@ as_fn_executable_p FILE +@%:@ ----------------------- +@%:@ Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} @%:@ as_fn_executable_p +@%:@ as_fn_append VAR VALUE +@%:@ ---------------------- +@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take +@%:@ advantage of any shell optimizations that allow amortized linear growth over +@%:@ repeated appends, instead of the typical quadratic growth present in naive +@%:@ implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +@%:@ as_fn_arith ARG... +@%:@ ------------------ +@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the +@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments +@%:@ must be portable across @S|@(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] +@%:@ ---------------------------------------- +@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are +@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the +@%:@ script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} @%:@ as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in @%:@((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIB@&t@OBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='Osmo' +PACKAGE_TARNAME='osmo' +PACKAGE_VERSION='0.2.12' +PACKAGE_STRING='Osmo 0.2.12' +PACKAGE_BUGREPORT='pasp@users.sf.net' +PACKAGE_URL='' + +ac_unique_file="src/contacts.c" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='WIN32_FALSE +WIN32_TRUE +am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +CONFIGDIR_FALSE +CONFIGDIR_TRUE +configdir +CONFIGPATH_FALSE +CONFIGPATH_TRUE +configpath +PANGO_1_20_LIBS +PANGO_1_20_CFLAGS +HAVE_LIBWEBKIT_FALSE +HAVE_LIBWEBKIT_TRUE +HAVE_LIBGTKHTML_FALSE +HAVE_LIBGTKHTML_TRUE +LIBWEBKIT_LIBS +LIBWEBKIT_CFLAGS +LIBGTKHTML_LIBS +LIBGTKHTML_CFLAGS +HAVE_LIBNOTIFY_FALSE +HAVE_LIBNOTIFY_TRUE +TASKS_ENABLED_FALSE +TASKS_ENABLED_TRUE +LIBNOTIFY_LIBS +LIBNOTIFY_CFLAGS +HAVE_GTKSPELL_FALSE +HAVE_GTKSPELL_TRUE +GTKSPELL_LIBS +GTKSPELL_CFLAGS +HAVE_LIBICAL_FALSE +HAVE_LIBICAL_TRUE +LIBICAL_LIBS +LIBICAL_CFLAGS +HAVE_LIBARCHIVE_FALSE +HAVE_LIBARCHIVE_TRUE +LIBARCHIVE_LIBS +LIBARCHIVE_CFLAGS +GTHREAD_LIBS +GTHREAD_CFLAGS +XML_LIBS +XML_CPPFLAGS +XML2_CONFIG +GTK_LIBS +GTK_CFLAGS +MSGFMT +LIB@&t@OBJS +EGREP +GREP +CPP +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +PKG_CONFIG +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL +am__quote' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +with_contacts +with_tasks +with_notes +enable_dependency_tracking +enable_gtktest +with_xml_prefix +with_xml_exec_prefix +enable_xmltest +enable_debug +enable_printing +enable_backup +with_config_path +with_config_dir +' + ac_precious_vars='build_alias +host_alias +target_alias +PKG_CONFIG +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP +GTHREAD_CFLAGS +GTHREAD_LIBS +LIBARCHIVE_CFLAGS +LIBARCHIVE_LIBS +LIBICAL_CFLAGS +LIBICAL_LIBS +GTKSPELL_CFLAGS +GTKSPELL_LIBS +LIBNOTIFY_CFLAGS +LIBNOTIFY_LIBS +LIBGTKHTML_CFLAGS +LIBGTKHTML_LIBS +LIBWEBKIT_CFLAGS +LIBWEBKIT_LIBS +PANGO_1_20_CFLAGS +PANGO_1_20_LIBS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures Osmo 0.2.12 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + @<:@@S|@ac_default_prefix@:>@ + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + @<:@PREFIX@:>@ + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root @<:@DATAROOTDIR/doc/osmo@:>@ + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of Osmo 0.2.12:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --disable-gtktest do not try to compile and run a test GTK+ program + --disable-xmltest Do not try to compile and run a test LIBXML program + --enable-debug=yes,no compile with debugging support (default: no) + --enable-printing=yes,no compile with printing support (default: yes) + --enable-backup=yes,no compile with backup support (default: yes) + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --without-contacts disable Contacts module + --without-tasks disable Tasks module + --without-notes disable Notes module + --with-xml-prefix=PFX Prefix where libxml is installed (optional) + --with-xml-exec-prefix=PFX Exec prefix where libxml is installed (optional) + --with-config-path=PATH use a non-default config path + --with-config-dir=DIR use a non-default config directory + +Some influential environment variables: + PKG_CONFIG path to pkg-config utility + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + GTHREAD_CFLAGS + C compiler flags for GTHREAD, overriding pkg-config + GTHREAD_LIBS + linker flags for GTHREAD, overriding pkg-config + LIBARCHIVE_CFLAGS + C compiler flags for LIBARCHIVE, overriding pkg-config + LIBARCHIVE_LIBS + linker flags for LIBARCHIVE, overriding pkg-config + LIBICAL_CFLAGS + C compiler flags for LIBICAL, overriding pkg-config + LIBICAL_LIBS + linker flags for LIBICAL, overriding pkg-config + GTKSPELL_CFLAGS + C compiler flags for GTKSPELL, overriding pkg-config + GTKSPELL_LIBS + linker flags for GTKSPELL, overriding pkg-config + LIBNOTIFY_CFLAGS + C compiler flags for LIBNOTIFY, overriding pkg-config + LIBNOTIFY_LIBS + linker flags for LIBNOTIFY, overriding pkg-config + LIBGTKHTML_CFLAGS + C compiler flags for LIBGTKHTML, overriding pkg-config + LIBGTKHTML_LIBS + linker flags for LIBGTKHTML, overriding pkg-config + LIBWEBKIT_CFLAGS + C compiler flags for LIBWEBKIT, overriding pkg-config + LIBWEBKIT_LIBS + linker flags for LIBWEBKIT, overriding pkg-config + PANGO_1_20_CFLAGS + C compiler flags for PANGO_1_20, overriding pkg-config + PANGO_1_20_LIBS + linker flags for PANGO_1_20, overriding pkg-config + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +Osmo configure 0.2.12 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +@%:@ ac_fn_c_try_compile LINENO +@%:@ -------------------------- +@%:@ Try to compile conftest.@S|@ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} @%:@ ac_fn_c_try_compile + +@%:@ ac_fn_c_try_cpp LINENO +@%:@ ---------------------- +@%:@ Try to preprocess conftest.@S|@ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} @%:@ ac_fn_c_try_cpp + +@%:@ ac_fn_c_try_run LINENO +@%:@ ---------------------- +@%:@ Try to link conftest.@S|@ac_ext, and return whether this succeeded. Assumes +@%:@ that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} @%:@ ac_fn_c_try_run + +@%:@ ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +@%:@ ------------------------------------------------------- +@%:@ Tests whether HEADER exists, giving a warning if it cannot be compiled using +@%:@ the include files in INCLUDES and setting the cache variable VAR +@%:@ accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +@%:@include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +@%:@include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( $as_echo "## -------------------------------- ## +## Report this to pasp@users.sf.net ## +## -------------------------------- ##" + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} @%:@ ac_fn_c_check_header_mongrel + +@%:@ ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +@%:@ ------------------------------------------------------- +@%:@ Tests whether HEADER exists and can be compiled using the include files in +@%:@ INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +@%:@include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} @%:@ ac_fn_c_check_header_compile + +@%:@ ac_fn_c_check_type LINENO TYPE VAR INCLUDES +@%:@ ------------------------------------------- +@%:@ Tests whether TYPE exists after having included INCLUDES, setting cache +@%:@ variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} @%:@ ac_fn_c_check_type + +@%:@ ac_fn_c_try_link LINENO +@%:@ ----------------------- +@%:@ Try to link conftest.@S|@ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} @%:@ ac_fn_c_try_link + +@%:@ ac_fn_c_check_func LINENO FUNC VAR +@%:@ ---------------------------------- +@%:@ Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} @%:@ ac_fn_c_check_func +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by Osmo $as_me 0.2.12, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in @%:@(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +fi +for ac_site_file in $ac_site_file1 +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +am__api_version='1.16' + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in @%:@(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +@%:@ Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='osmo' + VERSION='0.2.12' + + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +@%:@define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + +ac_config_headers="$ac_config_headers config.h" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type of build" >&5 +$as_echo_n "checking for type of build... " >&6; } + + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi +else + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +fi + +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + PKG_CONFIG="" + fi + +fi + +# Checks for enabled modules + + +@%:@ Check whether --with-contacts was given. +if test "${with_contacts+set}" = set; then : + withval=$with_contacts; if test "x$withval" = "xyes" ; then contacts="yes" ; else contacts="no"; fi +else + contacts="yes" +fi + + + +@%:@ Check whether --with-tasks was given. +if test "${with_tasks+set}" = set; then : + withval=$with_tasks; if test "x$withval" = "xyes" ; then tasks="yes" ; else tasks="no"; fi +else + tasks="yes" +fi + + + +@%:@ Check whether --with-notes was given. +if test "${with_notes+set}" = set; then : + withval=$with_notes; if test "x$withval" = "xyes" ; then notes="yes" ; else notes="no"; fi +else + notes="yes" +fi + +if test "x$notes" = "xyes"; then + +$as_echo "@%:@define NOTES_ENABLED 1" >>confdefs.h + +fi + +# Checks for programs. +SAVEDFLAGS=${CFLAGS} +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $@%:@ != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +@%:@include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 +$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; } +cat > confinc.mk << 'END' +am__doit: + @echo this is the am__doit target >confinc.out +.PHONY: am__doit +END +am__include="#" +am__quote= +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 + (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + case $?:`cat confinc.out 2>/dev/null` in @%:@( + '0:this is the am__doit target') : + case $s in @%:@( + BSD) : + am__include='.include' am__quote='"' ;; @%:@( + *) : + am__include='include' am__quote='' ;; +esac ;; @%:@( + *) : + ;; +esac + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 +$as_echo "${_am_result}" >&6; } + +@%:@ Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +CFLAGS=${SAVEDFLAGS} + +# Checks for header files. + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +@%:@ifdef __STDC__ +@%:@ include +@%:@else +@%:@ include +@%:@endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +@%:@include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +@%:@ifdef __STDC__ +@%:@ include +@%:@else +@%:@ include +@%:@endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +@%:@include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "@%:@define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +@%:@define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in libintl.h locale.h limits.h fcntl.h stdlib.h string.h sys/time.h unistd.h pthread.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +@%:@define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +# Checks for typedefs, structures, and compiler characteristics. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if ${ac_cv_c_const+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + +#ifndef __cplusplus + /* Ultrix mips cc rejects this sort of thing. */ + typedef int charset[2]; + const charset cs = { 0, 0 }; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this sort of thing. */ + char tx; + char *t = &tx; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; } bx; + struct s *b = &bx; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes +else + ac_cv_c_const=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +$as_echo "@%:@define const /**/" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 +$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } +if ${ac_cv_struct_tm+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include + +int +main () +{ +struct tm tm; + int *p = &tm.tm_sec; + return !p; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_struct_tm=time.h +else + ac_cv_struct_tm=sys/time.h +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 +$as_echo "$ac_cv_struct_tm" >&6; } +if test $ac_cv_struct_tm = sys/time.h; then + +$as_echo "@%:@define TM_IN_SYS_TIME 1" >>confdefs.h + +fi + +ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" +if test "x$ac_cv_type_size_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +@%:@define size_t unsigned int +_ACEOF + +fi + + +# Checks for library functions. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether lstat correctly handles trailing slash" >&5 +$as_echo_n "checking whether lstat correctly handles trailing slash... " >&6; } +if ${ac_cv_func_lstat_dereferences_slashed_symlink+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f conftest.sym conftest.file +echo >conftest.file +if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then + if test "$cross_compiling" = yes; then : + ac_cv_func_lstat_dereferences_slashed_symlink=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +struct stat sbuf; + /* Linux will dereference the symlink and fail, as required by POSIX. + That is better in the sense that it means we will not + have to compile and use the lstat wrapper. */ + return lstat ("conftest.sym/", &sbuf) == 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_lstat_dereferences_slashed_symlink=yes +else + ac_cv_func_lstat_dereferences_slashed_symlink=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +else + # If the `ln -s' command failed, then we probably don't even + # have an lstat function. + ac_cv_func_lstat_dereferences_slashed_symlink=no +fi +rm -f conftest.sym conftest.file + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 +$as_echo "$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; } + +test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && + +cat >>confdefs.h <<_ACEOF +@%:@define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 +_ACEOF + + +if test "x$ac_cv_func_lstat_dereferences_slashed_symlink" = xno; then + case " $LIB@&t@OBJS " in + *" lstat.$ac_objext "* ) ;; + *) LIB@&t@OBJS="$LIB@&t@OBJS lstat.$ac_objext" + ;; +esac + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat accepts an empty string" >&5 +$as_echo_n "checking whether stat accepts an empty string... " >&6; } +if ${ac_cv_func_stat_empty_string_bug+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_stat_empty_string_bug=yes +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +struct stat sbuf; + return stat ("", &sbuf) == 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_stat_empty_string_bug=no +else + ac_cv_func_stat_empty_string_bug=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_stat_empty_string_bug" >&5 +$as_echo "$ac_cv_func_stat_empty_string_bug" >&6; } +if test $ac_cv_func_stat_empty_string_bug = yes; then + case " $LIB@&t@OBJS " in + *" stat.$ac_objext "* ) ;; + *) LIB@&t@OBJS="$LIB@&t@OBJS stat.$ac_objext" + ;; +esac + + +cat >>confdefs.h <<_ACEOF +@%:@define HAVE_STAT_EMPTY_STRING_BUG 1 +_ACEOF + +fi + +for ac_func in strftime +do : + ac_fn_c_check_func "$LINENO" "strftime" "ac_cv_func_strftime" +if test "x$ac_cv_func_strftime" = xyes; then : + cat >>confdefs.h <<_ACEOF +@%:@define HAVE_STRFTIME 1 +_ACEOF + +else + # strftime is in -lintl on SCO UNIX. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for strftime in -lintl" >&5 +$as_echo_n "checking for strftime in -lintl... " >&6; } +if ${ac_cv_lib_intl_strftime+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lintl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char strftime (); +int +main () +{ +return strftime (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_intl_strftime=yes +else + ac_cv_lib_intl_strftime=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_strftime" >&5 +$as_echo "$ac_cv_lib_intl_strftime" >&6; } +if test "x$ac_cv_lib_intl_strftime" = xyes; then : + $as_echo "@%:@define HAVE_STRFTIME 1" >>confdefs.h + +LIBS="-lintl $LIBS" +fi + +fi +done + +for ac_func in floor memset setlocale strncasecmp strstr strtol +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +@%:@define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + +# Checks for msgfmt +# Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_MSGFMT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt" + ;; +esac +fi +MSGFMT=$ac_cv_path_MSGFMT +if test -n "$MSGFMT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 +$as_echo "$MSGFMT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + +# Checks for libraries. +@%:@ Check whether --enable-gtktest was given. +if test "${enable_gtktest+set}" = set; then : + enableval=$enable_gtktest; +else + enable_gtktest=yes +fi + + + pkg_config_args=gtk+-2.0 + for module in . + do + case "$module" in + gthread) + pkg_config_args="$pkg_config_args gthread-2.0" + ;; + esac + done + + no_gtk="" + + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no" + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + if test x$PKG_CONFIG != xno ; then + if pkg-config --atleast-pkgconfig-version 0.7 ; then + : + else + echo "*** pkg-config too old; version 0.7 or better required." + no_gtk=yes + PKG_CONFIG=no + fi + else + no_gtk=yes + fi + + min_gtk_version=2.12.0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK+ - version >= $min_gtk_version" >&5 +$as_echo_n "checking for GTK+ - version >= $min_gtk_version... " >&6; } + + if test x$PKG_CONFIG != xno ; then + ## don't try to run the test against uninstalled libtool libs + if $PKG_CONFIG --uninstalled $pkg_config_args; then + echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH" + enable_gtktest=no + fi + + if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then + : + else + no_gtk=yes + fi + fi + + if test x"$no_gtk" = x ; then + GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags` + GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs` + gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` + gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` + gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` + if test "x$enable_gtktest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $GTK_CFLAGS" + LIBS="$GTK_LIBS $LIBS" + rm -f conf.gtktest + if test "$cross_compiling" = yes; then : + echo $ac_n "cross compiling; assumed OK... $ac_c" +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include +#include + +int +main () +{ + int major, minor, micro; + char *tmp_version; + + system ("touch conf.gtktest"); + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = g_strdup("$min_gtk_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_gtk_version"); + exit(1); + } + + if ((gtk_major_version != $gtk_config_major_version) || + (gtk_minor_version != $gtk_config_minor_version) || + (gtk_micro_version != $gtk_config_micro_version)) + { + printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", + $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, + gtk_major_version, gtk_minor_version, gtk_micro_version); + printf ("*** was found! If pkg-config was correct, then it is best\n"); + printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); + printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); + printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); + printf("*** required on your system.\n"); + printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); + printf("*** to point to the correct configuration files\n"); + } + else if ((gtk_major_version != GTK_MAJOR_VERSION) || + (gtk_minor_version != GTK_MINOR_VERSION) || + (gtk_micro_version != GTK_MICRO_VERSION)) + { + printf("*** GTK+ header files (version %d.%d.%d) do not match\n", + GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); + printf("*** library (version %d.%d.%d)\n", + gtk_major_version, gtk_minor_version, gtk_micro_version); + } + else + { + if ((gtk_major_version > major) || + ((gtk_major_version == major) && (gtk_minor_version > minor)) || + ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", + gtk_major_version, gtk_minor_version, gtk_micro_version); + printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", + major, minor, micro); + printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); + printf("***\n"); + printf("*** If you have already installed a sufficiently new version, this error\n"); + printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); + printf("*** being found. The easiest way to fix this is to remove the old version\n"); + printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n"); + printf("*** correct copy of pkg-config. (In this case, you will have to\n"); + printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); + printf("*** so that the correct libraries are found at run-time))\n"); + } + } + return 1; +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + no_gtk=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_gtk" = x ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" >&5 +$as_echo "yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" >&6; } + : + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + if test "$PKG_CONFIG" = "no" ; then + echo "*** A new enough version of pkg-config was not found." + echo "*** See http://pkgconfig.sourceforge.net" + else + if test -f conf.gtktest ; then + : + else + echo "*** Could not run GTK+ test program, checking why..." + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $GTK_CFLAGS" + LIBS="$LIBS $GTK_LIBS" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main () +{ + return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding GTK+ or finding the wrong" + echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" +else + echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means GTK+ is incorrectly installed." +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + GTK_CFLAGS="" + GTK_LIBS="" + as_fn_error $? "GTK+ not found or too old (version < 2.12)" "$LINENO" 5 + fi + + + rm -f conf.gtktest + + + + +@%:@ Check whether --with-xml-prefix was given. +if test "${with_xml_prefix+set}" = set; then : + withval=$with_xml_prefix; xml_config_prefix="$withval" +else + xml_config_prefix="" +fi + + +@%:@ Check whether --with-xml-exec-prefix was given. +if test "${with_xml_exec_prefix+set}" = set; then : + withval=$with_xml_exec_prefix; xml_config_exec_prefix="$withval" +else + xml_config_exec_prefix="" +fi + +@%:@ Check whether --enable-xmltest was given. +if test "${enable_xmltest+set}" = set; then : + enableval=$enable_xmltest; +else + enable_xmltest=yes +fi + + + if test x$xml_config_exec_prefix != x ; then + xml_config_args="$xml_config_args" + if test x${XML2_CONFIG+set} != xset ; then + XML2_CONFIG=$xml_config_exec_prefix/bin/xml2-config + fi + fi + if test x$xml_config_prefix != x ; then + xml_config_args="$xml_config_args --prefix=$xml_config_prefix" + if test x${XML2_CONFIG+set} != xset ; then + XML2_CONFIG=$xml_config_prefix/bin/xml2-config + fi + fi + + # Extract the first word of "xml2-config", so it can be a program name with args. +set dummy xml2-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_XML2_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $XML2_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_XML2_CONFIG="$XML2_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_XML2_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_path_XML2_CONFIG" && ac_cv_path_XML2_CONFIG="no" + ;; +esac +fi +XML2_CONFIG=$ac_cv_path_XML2_CONFIG +if test -n "$XML2_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XML2_CONFIG" >&5 +$as_echo "$XML2_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + min_xml_version=2.0.0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libxml - version >= $min_xml_version" >&5 +$as_echo_n "checking for libxml - version >= $min_xml_version... " >&6; } + no_xml="" + if test "$XML2_CONFIG" = "no" ; then + no_xml=yes + else + XML_CPPFLAGS=`$XML2_CONFIG $xml_config_args --cflags` + XML_LIBS=`$XML2_CONFIG $xml_config_args --libs` + xml_config_major_version=`$XML2_CONFIG $xml_config_args --version | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` + xml_config_minor_version=`$XML2_CONFIG $xml_config_args --version | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` + xml_config_micro_version=`$XML2_CONFIG $xml_config_args --version | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` + if test "x$enable_xmltest" = "xyes" ; then + ac_save_CPPFLAGS="$CPPFLAGS" + ac_save_LIBS="$LIBS" + CPPFLAGS="$CPPFLAGS $XML_CPPFLAGS" + LIBS="$XML_LIBS $LIBS" + rm -f conf.xmltest + if test "$cross_compiling" = yes; then : + echo $ac_n "cross compiling; assumed OK... $ac_c" +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include +#include +#include + +int +main() +{ + int xml_major_version, xml_minor_version, xml_micro_version; + int major, minor, micro; + char *tmp_version; + + system("touch conf.xmltest"); + + /* Capture xml2-config output via autoconf/configure variables */ + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = (char *)strdup("$min_xml_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string from xml2-config\n", "$min_xml_version"); + exit(1); + } + free(tmp_version); + + /* Capture the version information from the header files */ + tmp_version = (char *)strdup(LIBXML_DOTTED_VERSION); + if (sscanf(tmp_version, "%d.%d.%d", &xml_major_version, &xml_minor_version, &xml_micro_version) != 3) { + printf("%s, bad version string from libxml includes\n", "LIBXML_DOTTED_VERSION"); + exit(1); + } + free(tmp_version); + + /* Compare xml2-config output to the libxml headers */ + if ((xml_major_version != $xml_config_major_version) || + (xml_minor_version != $xml_config_minor_version) || + (xml_micro_version != $xml_config_micro_version)) + { + printf("*** libxml header files (version %d.%d.%d) do not match\n", + xml_major_version, xml_minor_version, xml_micro_version); + printf("*** xml2-config (version %d.%d.%d)\n", + $xml_config_major_version, $xml_config_minor_version, $xml_config_micro_version); + return 1; + } +/* Compare the headers to the library to make sure we match */ + /* Less than ideal -- doesn't provide us with return value feedback, + * only exits if there's a serious mismatch between header and library. + */ + LIBXML_TEST_VERSION; + + /* Test that the library is greater than our minimum version */ + if ((xml_major_version > major) || + ((xml_major_version == major) && (xml_minor_version > minor)) || + ((xml_major_version == major) && (xml_minor_version == minor) && + (xml_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** An old version of libxml (%d.%d.%d) was found.\n", + xml_major_version, xml_minor_version, xml_micro_version); + printf("*** You need a version of libxml newer than %d.%d.%d. The latest version of\n", + major, minor, micro); + printf("*** libxml is always available from ftp://ftp.xmlsoft.org.\n"); + printf("***\n"); + printf("*** If you have already installed a sufficiently new version, this error\n"); + printf("*** probably means that the wrong copy of the xml2-config shell script is\n"); + printf("*** being found. The easiest way to fix this is to remove the old version\n"); + printf("*** of LIBXML, but you can also set the XML2_CONFIG environment to point to the\n"); + printf("*** correct copy of xml2-config. (In this case, you will have to\n"); + printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); + printf("*** so that the correct libraries are found at run-time))\n"); + } + return 1; +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + no_xml=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + CPPFLAGS="$ac_save_CPPFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + + if test "x$no_xml" = x ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (version $xml_config_major_version.$xml_config_minor_version.$xml_config_micro_version)" >&5 +$as_echo "yes (version $xml_config_major_version.$xml_config_minor_version.$xml_config_micro_version)" >&6; } + : + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + if test "$XML2_CONFIG" = "no" ; then + echo "*** The xml2-config script installed by LIBXML could not be found" + echo "*** If libxml was installed in PREFIX, make sure PREFIX/bin is in" + echo "*** your path, or set the XML2_CONFIG environment variable to the" + echo "*** full path to xml2-config." + else + if test -f conf.xmltest ; then + : + else + echo "*** Could not run libxml test program, checking why..." + CPPFLAGS="$CPPFLAGS $XML_CPPFLAGS" + LIBS="$LIBS $XML_LIBS" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main () +{ + LIBXML_TEST_VERSION; return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding LIBXML or finding the wrong" + echo "*** version of LIBXML. If it is not finding LIBXML, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" +else + echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means LIBXML was incorrectly installed" + echo "*** or that you have moved LIBXML since it was installed. In the latter case, you" + echo "*** may want to edit the xml2-config script: $XML2_CONFIG" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + CPPFLAGS="$ac_save_CPPFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + + XML_CPPFLAGS="" + XML_LIBS="" + as_fn_error $? "You do not appear to have libxml2 installed." "$LINENO" 5 + fi + + + rm -f conf.xmltest + + + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTHREAD" >&5 +$as_echo_n "checking for GTHREAD... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$GTHREAD_CFLAGS"; then + pkg_cv_GTHREAD_CFLAGS="$GTHREAD_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gthread-2.0 >= 2.6.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gthread-2.0 >= 2.6.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GTHREAD_CFLAGS=`$PKG_CONFIG --cflags "gthread-2.0 >= 2.6.0" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$GTHREAD_LIBS"; then + pkg_cv_GTHREAD_LIBS="$GTHREAD_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gthread-2.0 >= 2.6.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gthread-2.0 >= 2.6.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GTHREAD_LIBS=`$PKG_CONFIG --libs "gthread-2.0 >= 2.6.0" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + GTHREAD_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gthread-2.0 >= 2.6.0"` + else + GTHREAD_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gthread-2.0 >= 2.6.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GTHREAD_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (gthread-2.0 >= 2.6.0) were not met: + +$GTHREAD_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables GTHREAD_CFLAGS +and GTHREAD_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" "$LINENO" 5 +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables GTHREAD_CFLAGS +and GTHREAD_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see . +See \`config.log' for more details" "$LINENO" 5; } +else + GTHREAD_CFLAGS=$pkg_cv_GTHREAD_CFLAGS + GTHREAD_LIBS=$pkg_cv_GTHREAD_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + : +fi + +# Checks for libgringotts +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grg_context_initialize_defaults in -lgringotts" >&5 +$as_echo_n "checking for grg_context_initialize_defaults in -lgringotts... " >&6; } +if ${ac_cv_lib_gringotts_grg_context_initialize_defaults+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lgringotts $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char grg_context_initialize_defaults (); +int +main () +{ +return grg_context_initialize_defaults (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_gringotts_grg_context_initialize_defaults=yes +else + ac_cv_lib_gringotts_grg_context_initialize_defaults=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gringotts_grg_context_initialize_defaults" >&5 +$as_echo "$ac_cv_lib_gringotts_grg_context_initialize_defaults" >&6; } +if test "x$ac_cv_lib_gringotts_grg_context_initialize_defaults" = xyes; then : + lib=yes +else + lib=no +fi + +libgringotts="no" +if test "$lib" = "yes"; then + libgringotts="yes" +fi +if test "x$lib" = "xyes"; then + gringotts_LIBS="-lgringotts" + +$as_echo "@%:@define HAVE_LIBGRINGOTTS 1" >>confdefs.h + +fi + +# Checks for libarchive + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBARCHIVE" >&5 +$as_echo_n "checking for LIBARCHIVE... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$LIBARCHIVE_CFLAGS"; then + pkg_cv_LIBARCHIVE_CFLAGS="$LIBARCHIVE_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libarchive >= 3.0.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libarchive >= 3.0.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBARCHIVE_CFLAGS=`$PKG_CONFIG --cflags "libarchive >= 3.0.0" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$LIBARCHIVE_LIBS"; then + pkg_cv_LIBARCHIVE_LIBS="$LIBARCHIVE_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libarchive >= 3.0.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libarchive >= 3.0.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBARCHIVE_LIBS=`$PKG_CONFIG --libs "libarchive >= 3.0.0" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LIBARCHIVE_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libarchive >= 3.0.0"` + else + LIBARCHIVE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libarchive >= 3.0.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBARCHIVE_PKG_ERRORS" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + have_libarchive=false +elif test $pkg_failed = untried; then + have_libarchive=false +else + LIBARCHIVE_CFLAGS=$pkg_cv_LIBARCHIVE_CFLAGS + LIBARCHIVE_LIBS=$pkg_cv_LIBARCHIVE_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + have_libarchive=true +fi +if test "x$have_libarchive" = "xtrue"; then + libarchive="yes" + libarchive_LIBS="-larchive" + +$as_echo "@%:@define HAVE_LIBARCHIVE 1" >>confdefs.h + +else + libarchive="no" +fi + if test "x$have_libarchive" = "xtrue"; then + HAVE_LIBARCHIVE_TRUE= + HAVE_LIBARCHIVE_FALSE='#' +else + HAVE_LIBARCHIVE_TRUE='#' + HAVE_LIBARCHIVE_FALSE= +fi + + +# Checks for libsqlite3 +#PKG_CHECK_MODULES(LIBSQLITE3, sqlite3 >= 3.7.0, have_libsqlite3=true, +# have_libsqlite3=false) +#if test "x$have_libsqlite3" = "xtrue"; then +# AC_DEFINE([HAVE_LIBSQLITE3], [1], [Definded to 1 if compile with libsqlite3 support]) +# libsqlite3="yes" +#else +# libsqlite3="no" +#fi +#AM_CONDITIONAL([HAVE_LIBSQLITE3], test "x$have_libsqlite3" = "xtrue") + +# Checks for libical + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBICAL" >&5 +$as_echo_n "checking for LIBICAL... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$LIBICAL_CFLAGS"; then + pkg_cv_LIBICAL_CFLAGS="$LIBICAL_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libical >= 0.33\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libical >= 0.33") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBICAL_CFLAGS=`$PKG_CONFIG --cflags "libical >= 0.33" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$LIBICAL_LIBS"; then + pkg_cv_LIBICAL_LIBS="$LIBICAL_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libical >= 0.33\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libical >= 0.33") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBICAL_LIBS=`$PKG_CONFIG --libs "libical >= 0.33" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LIBICAL_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libical >= 0.33"` + else + LIBICAL_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libical >= 0.33"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBICAL_PKG_ERRORS" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + have_libical=false +elif test $pkg_failed = untried; then + have_libical=false +else + LIBICAL_CFLAGS=$pkg_cv_LIBICAL_CFLAGS + LIBICAL_LIBS=$pkg_cv_LIBICAL_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + have_libical=true +fi +if test "x$have_libical" = "xtrue"; then + +$as_echo "@%:@define HAVE_LIBICAL 1" >>confdefs.h + + libical="yes" +else + libical="no" +fi + if test "x$have_libical" = "xtrue"; then + HAVE_LIBICAL_TRUE= + HAVE_LIBICAL_FALSE='#' +else + HAVE_LIBICAL_TRUE='#' + HAVE_LIBICAL_FALSE= +fi + + +# Checks for gtkspell + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTKSPELL" >&5 +$as_echo_n "checking for GTKSPELL... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$GTKSPELL_CFLAGS"; then + pkg_cv_GTKSPELL_CFLAGS="$GTKSPELL_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtkspell-2.0 >= 2.0.5\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gtkspell-2.0 >= 2.0.5") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GTKSPELL_CFLAGS=`$PKG_CONFIG --cflags "gtkspell-2.0 >= 2.0.5" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$GTKSPELL_LIBS"; then + pkg_cv_GTKSPELL_LIBS="$GTKSPELL_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtkspell-2.0 >= 2.0.5\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gtkspell-2.0 >= 2.0.5") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GTKSPELL_LIBS=`$PKG_CONFIG --libs "gtkspell-2.0 >= 2.0.5" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + GTKSPELL_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gtkspell-2.0 >= 2.0.5"` + else + GTKSPELL_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gtkspell-2.0 >= 2.0.5"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GTKSPELL_PKG_ERRORS" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + have_gtkspell=false +elif test $pkg_failed = untried; then + have_gtkspell=false +else + GTKSPELL_CFLAGS=$pkg_cv_GTKSPELL_CFLAGS + GTKSPELL_LIBS=$pkg_cv_GTKSPELL_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + have_gtkspell=true +fi +if test "x$have_gtkspell" = "xtrue"; then + +$as_echo "@%:@define HAVE_GTKSPELL 1" >>confdefs.h + + gtkspell="yes" +else + gtkspell="no" +fi + if test "x$have_gtkspell" = "xtrue"; then + HAVE_GTKSPELL_TRUE= + HAVE_GTKSPELL_FALSE='#' +else + HAVE_GTKSPELL_TRUE='#' + HAVE_GTKSPELL_FALSE= +fi + + +# Checks for libnotify + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBNOTIFY" >&5 +$as_echo_n "checking for LIBNOTIFY... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$LIBNOTIFY_CFLAGS"; then + pkg_cv_LIBNOTIFY_CFLAGS="$LIBNOTIFY_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libnotify >= 0.7.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libnotify >= 0.7.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBNOTIFY_CFLAGS=`$PKG_CONFIG --cflags "libnotify >= 0.7.0" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$LIBNOTIFY_LIBS"; then + pkg_cv_LIBNOTIFY_LIBS="$LIBNOTIFY_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libnotify >= 0.7.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libnotify >= 0.7.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBNOTIFY_LIBS=`$PKG_CONFIG --libs "libnotify >= 0.7.0" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libnotify >= 0.7.0"` + else + LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libnotify >= 0.7.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBNOTIFY_PKG_ERRORS" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + have_libnotify7=false +elif test $pkg_failed = untried; then + have_libnotify7=false +else + LIBNOTIFY_CFLAGS=$pkg_cv_LIBNOTIFY_CFLAGS + LIBNOTIFY_LIBS=$pkg_cv_LIBNOTIFY_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + have_libnotify7=true +fi +if test "x$have_libnotify7" = "xtrue"; then + +$as_echo "@%:@define HAVE_LIBNOTIFY 1" >>confdefs.h + + +$as_echo "@%:@define HAVE_LIBNOTIFY7 1" >>confdefs.h + + libnotify="yes" +else + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBNOTIFY" >&5 +$as_echo_n "checking for LIBNOTIFY... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$LIBNOTIFY_CFLAGS"; then + pkg_cv_LIBNOTIFY_CFLAGS="$LIBNOTIFY_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libnotify >= 0.4.4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libnotify >= 0.4.4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBNOTIFY_CFLAGS=`$PKG_CONFIG --cflags "libnotify >= 0.4.4" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$LIBNOTIFY_LIBS"; then + pkg_cv_LIBNOTIFY_LIBS="$LIBNOTIFY_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libnotify >= 0.4.4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libnotify >= 0.4.4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBNOTIFY_LIBS=`$PKG_CONFIG --libs "libnotify >= 0.4.4" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libnotify >= 0.4.4"` + else + LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libnotify >= 0.4.4"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBNOTIFY_PKG_ERRORS" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + have_libnotify=false +elif test $pkg_failed = untried; then + have_libnotify=false +else + LIBNOTIFY_CFLAGS=$pkg_cv_LIBNOTIFY_CFLAGS + LIBNOTIFY_LIBS=$pkg_cv_LIBNOTIFY_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + have_libnotify=true +fi + if test "x$have_libnotify" = "xtrue"; then + +$as_echo "@%:@define HAVE_LIBNOTIFY 1" >>confdefs.h + + libnotify="yes" + else + libnotify="no" + fi +fi + if test "x$tasks" = "xyes"; then + TASKS_ENABLED_TRUE= + TASKS_ENABLED_FALSE='#' +else + TASKS_ENABLED_TRUE='#' + TASKS_ENABLED_FALSE= +fi + + if test "x$have_libnotify" = "xtrue"; then + HAVE_LIBNOTIFY_TRUE= + HAVE_LIBNOTIFY_FALSE='#' +else + HAVE_LIBNOTIFY_TRUE='#' + HAVE_LIBNOTIFY_FALSE= +fi + + +if test "x$tasks" = "xyes"; then + +$as_echo "@%:@define TASKS_ENABLED 1" >>confdefs.h + +fi + +# Checks for libgtkhtml + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBGTKHTML" >&5 +$as_echo_n "checking for LIBGTKHTML... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$LIBGTKHTML_CFLAGS"; then + pkg_cv_LIBGTKHTML_CFLAGS="$LIBGTKHTML_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libgtkhtml-2.0 >= 2.2.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libgtkhtml-2.0 >= 2.2.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBGTKHTML_CFLAGS=`$PKG_CONFIG --cflags "libgtkhtml-2.0 >= 2.2.0" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$LIBGTKHTML_LIBS"; then + pkg_cv_LIBGTKHTML_LIBS="$LIBGTKHTML_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libgtkhtml-2.0 >= 2.2.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libgtkhtml-2.0 >= 2.2.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBGTKHTML_LIBS=`$PKG_CONFIG --libs "libgtkhtml-2.0 >= 2.2.0" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LIBGTKHTML_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libgtkhtml-2.0 >= 2.2.0"` + else + LIBGTKHTML_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libgtkhtml-2.0 >= 2.2.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBGTKHTML_PKG_ERRORS" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + have_libgtkhtml=false +elif test $pkg_failed = untried; then + have_libgtkhtml=false +else + LIBGTKHTML_CFLAGS=$pkg_cv_LIBGTKHTML_CFLAGS + LIBGTKHTML_LIBS=$pkg_cv_LIBGTKHTML_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + have_libgtkhtml=true +fi +if test "x$have_libgtkhtml" = "xtrue"; then + libgtkhtml="yes" +else + libgtkhtml="no" +fi + +# Checks for libwebkit + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBWEBKIT" >&5 +$as_echo_n "checking for LIBWEBKIT... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$LIBWEBKIT_CFLAGS"; then + pkg_cv_LIBWEBKIT_CFLAGS="$LIBWEBKIT_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"webkit-1.0 >= 1.1.15.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "webkit-1.0 >= 1.1.15.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBWEBKIT_CFLAGS=`$PKG_CONFIG --cflags "webkit-1.0 >= 1.1.15.0" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$LIBWEBKIT_LIBS"; then + pkg_cv_LIBWEBKIT_LIBS="$LIBWEBKIT_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"webkit-1.0 >= 1.1.15.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "webkit-1.0 >= 1.1.15.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LIBWEBKIT_LIBS=`$PKG_CONFIG --libs "webkit-1.0 >= 1.1.15.0" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LIBWEBKIT_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "webkit-1.0 >= 1.1.15.0"` + else + LIBWEBKIT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "webkit-1.0 >= 1.1.15.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBWEBKIT_PKG_ERRORS" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + have_libwebkit=false +elif test $pkg_failed = untried; then + have_libwebkit=false +else + LIBWEBKIT_CFLAGS=$pkg_cv_LIBWEBKIT_CFLAGS + LIBWEBKIT_LIBS=$pkg_cv_LIBWEBKIT_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + have_libwebkit=true +fi +if test "x$have_libwebkit" = "xtrue"; then + libwebkit="yes" +else + libwebkit="no" +fi + +contacts="yes"; +htmlrender="none"; +if test "x$have_libgtkhtml" = "xfalse"; then + contacts="no"; +else + htmlrender="gtkhtml2"; +fi +if test "x$have_libwebkit" = "xfalse"; then + if test "x$htmlrender" = "xnone"; then + contacts="no"; + else + +$as_echo "@%:@define HAVE_LIBGTKHTML 1" >>confdefs.h + + +$as_echo "@%:@define HTMLRENDER \"gtkhtml2\"" >>confdefs.h + + fi +else + htmlrender="webkit"; + libgtkhtml="no"; + contacts="yes"; + +$as_echo "@%:@define HAVE_LIBWEBKIT 1" >>confdefs.h + + +$as_echo "@%:@define HTMLRENDER \"webkit\"" >>confdefs.h + +fi + + + if test "x$libgtkhtml" = "xyes"; then + HAVE_LIBGTKHTML_TRUE= + HAVE_LIBGTKHTML_FALSE='#' +else + HAVE_LIBGTKHTML_TRUE='#' + HAVE_LIBGTKHTML_FALSE= +fi + + if test "x$libwebkit" = "xyes"; then + HAVE_LIBWEBKIT_TRUE= + HAVE_LIBWEBKIT_FALSE='#' +else + HAVE_LIBWEBKIT_TRUE='#' + HAVE_LIBWEBKIT_FALSE= +fi + + +if test "x$contacts" = "xyes"; then + +$as_echo "@%:@define CONTACTS_ENABLED 1" >>confdefs.h + +fi + +# Checks for Pango 1.20 + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PANGO_1_20" >&5 +$as_echo_n "checking for PANGO_1_20... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$PANGO_1_20_CFLAGS"; then + pkg_cv_PANGO_1_20_CFLAGS="$PANGO_1_20_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pango >= 1.20\""; } >&5 + ($PKG_CONFIG --exists --print-errors "pango >= 1.20") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_PANGO_1_20_CFLAGS=`$PKG_CONFIG --cflags "pango >= 1.20" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$PANGO_1_20_LIBS"; then + pkg_cv_PANGO_1_20_LIBS="$PANGO_1_20_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pango >= 1.20\""; } >&5 + ($PKG_CONFIG --exists --print-errors "pango >= 1.20") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_PANGO_1_20_LIBS=`$PKG_CONFIG --libs "pango >= 1.20" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + PANGO_1_20_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "pango >= 1.20"` + else + PANGO_1_20_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "pango >= 1.20"` + fi + # Put the nasty error message in config.log where it belongs + echo "$PANGO_1_20_PKG_ERRORS" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + HAVE_PANGO_1_20=no +elif test $pkg_failed = untried; then + HAVE_PANGO_1_20=no +else + PANGO_1_20_CFLAGS=$pkg_cv_PANGO_1_20_CFLAGS + PANGO_1_20_LIBS=$pkg_cv_PANGO_1_20_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + HAVE_PANGO_1_20=yes +fi +if test "x$HAVE_PANGO_1_20" = xyes; then + +$as_echo "@%:@define HAVE_PANGO_1_20 1" >>confdefs.h + +fi + +# Checks for additional options + +@%:@ Check whether --enable-debug was given. +if test "${enable_debug+set}" = set; then : + enableval=$enable_debug; debug="$enableval" +else + debug="no" +fi + +if test "x$debug" = "xyes"; then + BUILD_CFLAGS="-rdynamic -ggdb -g -O0" + +$as_echo "@%:@define DEBUG_BUILD 1" >>confdefs.h + +fi + +@%:@ Check whether --enable-printing was given. +if test "${enable_printing+set}" = set; then : + enableval=$enable_printing; printing="$enableval" +else + printing="yes" +fi + +if test "x$printing" = "xyes"; then + +$as_echo "@%:@define PRINTING_SUPPORT 1" >>confdefs.h + +fi + +@%:@ Check whether --enable-backup was given. +if test "${enable_backup+set}" = set; then : + enableval=$enable_backup; backup="$enableval" +else + backup="yes" +fi + +if test "x$backup" = "xyes"; then + if test "x$libarchive" = "xyes"; then + if test "x$libgringotts" = "xyes"; then + +$as_echo "@%:@define BACKUP_SUPPORT 1" >>confdefs.h + + else + backup="no" + fi + else + backup="no" + fi +fi + + +@%:@ Check whether --with-config-path was given. +if test "${with_config_path+set}" = set; then : + withval=$with_config_path; configpath=$withval +fi + + if test x$configpath != x; then + CONFIGPATH_TRUE= + CONFIGPATH_FALSE='#' +else + CONFIGPATH_TRUE='#' + CONFIGPATH_FALSE= +fi + + +@%:@ Check whether --with-config-dir was given. +if test "${with_config_dir+set}" = set; then : + withval=$with_config_dir; configdir=$withval +fi + + if test x$configdir != x; then + CONFIGDIR_TRUE= + CONFIGDIR_FALSE='#' +else + CONFIGDIR_TRUE='#' + CONFIGDIR_FALSE= +fi + + +CFLAGS=${CFLAGS:="$BUILD_CFLAGS -Wall $PLATFORM_CFLAGS -D_GNU_SOURCE"} +CXXFLAGS=${CXXFLAGS:="$CFLAGS"} +CPPFLAGS="" +LIBS="$gringotts_LIBS $libarchive_LIBS" + +ac_config_files="$ac_config_files Makefile src/Makefile po/Makefile data/Makefile data/icons/Makefile data/icons/16x16/Makefile data/icons/22x22/Makefile data/icons/24x24/Makefile data/icons/32x32/Makefile data/icons/48x48/Makefile data/icons/scalable/Makefile data/pixmaps/Makefile data/sounds/Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIB@&t@OBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBARCHIVE_TRUE}" && test -z "${HAVE_LIBARCHIVE_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBARCHIVE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBICAL_TRUE}" && test -z "${HAVE_LIBICAL_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBICAL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_GTKSPELL_TRUE}" && test -z "${HAVE_GTKSPELL_FALSE}"; then + as_fn_error $? "conditional \"HAVE_GTKSPELL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${TASKS_ENABLED_TRUE}" && test -z "${TASKS_ENABLED_FALSE}"; then + as_fn_error $? "conditional \"TASKS_ENABLED\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBNOTIFY_TRUE}" && test -z "${HAVE_LIBNOTIFY_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBNOTIFY\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBGTKHTML_TRUE}" && test -z "${HAVE_LIBGTKHTML_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBGTKHTML\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBWEBKIT_TRUE}" && test -z "${HAVE_LIBWEBKIT_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBWEBKIT\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${CONFIGPATH_TRUE}" && test -z "${CONFIGPATH_FALSE}"; then + as_fn_error $? "conditional \"CONFIGPATH\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${CONFIGDIR_TRUE}" && test -z "${CONFIGDIR_FALSE}"; then + as_fn_error $? "conditional \"CONFIGDIR\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in @%:@( + *posix*) : + set -o posix ;; @%:@( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +as_echo='printf %s\n' +as_echo_n='printf %s' + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in @%:@(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] +@%:@ ---------------------------------------- +@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are +@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the +@%:@ script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} @%:@ as_fn_error + + +@%:@ as_fn_set_status STATUS +@%:@ ----------------------- +@%:@ Set @S|@? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} @%:@ as_fn_set_status + +@%:@ as_fn_exit STATUS +@%:@ ----------------- +@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} @%:@ as_fn_exit + +@%:@ as_fn_unset VAR +@%:@ --------------- +@%:@ Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +@%:@ as_fn_append VAR VALUE +@%:@ ---------------------- +@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take +@%:@ advantage of any shell optimizations that allow amortized linear growth over +@%:@ repeated appends, instead of the typical quadratic growth present in naive +@%:@ implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +@%:@ as_fn_arith ARG... +@%:@ ------------------ +@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the +@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments +@%:@ must be portable across @S|@(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in @%:@((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +@%:@ as_fn_mkdir_p +@%:@ ------------- +@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} @%:@ as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +@%:@ as_fn_executable_p FILE +@%:@ ----------------------- +@%:@ Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} @%:@ as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by Osmo $as_me 0.2.12, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +Osmo config.status 0.2.12 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX +@%:@@%:@ Running $as_me. @%:@@%:@ +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; + "po/Makefile") CONFIG_FILES="$CONFIG_FILES po/Makefile" ;; + "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; + "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; + "data/icons/16x16/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/Makefile" ;; + "data/icons/22x22/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/Makefile" ;; + "data/icons/24x24/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/Makefile" ;; + "data/icons/32x32/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/32x32/Makefile" ;; + "data/icons/48x48/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/Makefile" ;; + "data/icons/scalable/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/Makefile" ;; + "data/pixmaps/Makefile") CONFIG_FILES="$CONFIG_FILES data/pixmaps/Makefile" ;; + "data/sounds/Makefile") CONFIG_FILES="$CONFIG_FILES data/sounds/Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + case $CONFIG_FILES in @%:@( + *\'*) : + eval set x "$CONFIG_FILES" ;; @%:@( + *) : + set x $CONFIG_FILES ;; @%:@( + *) : + ;; +esac + shift + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf + do + # Strip MF so we end up with the name of the file. + am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`$as_dirname -- "$am_mf" || +$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$am_mf" : 'X\(//\)[^/]' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$am_mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + am_filepart=`$as_basename -- "$am_mf" || +$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$am_mf" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { echo "$as_me:$LINENO: cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles" >&5 + (cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } || am_rc=$? + done + if test $am_rc -ne 0; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking). +See \`config.log' for more details" "$LINENO" 5; } + fi + { am_dirpart=; unset am_dirpart;} + { am_filepart=; unset am_filepart;} + { am_mf=; unset am_mf;} + { am_rc=; unset am_rc;} + rm -f conftest-deps.mk +} + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + + +# WIN32 build + if test "$WIN32" = "yes"; then + WIN32_TRUE= + WIN32_FALSE='#' +else + WIN32_TRUE='#' + WIN32_FALSE= +fi + + +# libsqlite3: $libsqlite3 + +echo " +Configuration: + + Prefix: $prefix + Debug enabled: $debug + + Backup support: $backup (libgringotts and libarchive are required) + Printing support: $printing + HTML renderer: $htmlrender (webkit, gtkhtml2) + +Enabled modules: + + Calendar: yes (always) + Tasks: $tasks + Contacts: $contacts (HTML renderer is required) + Notes: $notes + +Optional features: + + gtkspell: $gtkspell + libical: $libical + libnotify: $libnotify + libarchive: $libarchive + libgringotts: $libgringotts +" diff -Naur osmo-0.2.12-p1/autom4te.cache/requests osmo-0.2.12-p2/autom4te.cache/requests --- osmo-0.2.12-p1/autom4te.cache/requests 2022-01-16 19:38:24.993637154 +0800 +++ osmo-0.2.12-p2/autom4te.cache/requests 2022-01-16 19:43:39.110312908 +0800 @@ -15,63 +15,148 @@ 'configure.ac' ], { - '_AM_COND_ELSE' => 1, - 'm4_include' => 1, - 'AC_CANONICAL_BUILD' => 1, - 'AC_CANONICAL_SYSTEM' => 1, - 'AH_OUTPUT' => 1, - '_AM_COND_IF' => 1, - 'AM_CONDITIONAL' => 1, - 'AC_FC_FREEFORM' => 1, - 'AC_CONFIG_LIBOBJ_DIR' => 1, 'AM_SILENT_RULES' => 1, + 'AM_XGETTEXT_OPTION' => 1, + 'AM_PROG_AR' => 1, + 'AM_PATH_GUILE' => 1, + 'LT_INIT' => 1, + 'AM_PROG_FC_C_O' => 1, + 'AC_CANONICAL_HOST' => 1, + 'AC_CANONICAL_BUILD' => 1, + 'AC_INIT' => 1, + '_AM_COND_ENDIF' => 1, 'AC_CONFIG_HEADERS' => 1, + 'AM_NLS' => 1, + 'm4_pattern_allow' => 1, + 'AC_REQUIRE_AUX_FILE' => 1, + 'AM_AUTOMAKE_VERSION' => 1, + 'AM_PROG_MOC' => 1, 'AC_FC_PP_DEFINE' => 1, - 'AM_PATH_GUILE' => 1, - 'AC_FC_PP_SRCEXT' => 1, - 'AM_PROG_CC_C_O' => 1, - 'AC_PROG_LIBTOOL' => 1, - 'AM_POT_TOOLS' => 1, - 'AC_CONFIG_FILES' => 1, - 'AC_CONFIG_SUBDIRS' => 1, - 'AM_GNU_GETTEXT_INTL_SUBDIR' => 1, - 'AC_LIBSOURCE' => 1, 'AC_CANONICAL_TARGET' => 1, - 'AC_CONFIG_AUX_DIR' => 1, - 'AM_GNU_GETTEXT' => 1, + 'AC_CONFIG_SUBDIRS' => 1, + 'AM_POT_TOOLS' => 1, + 'AC_DEFINE_TRACE_LITERAL' => 1, + 'AM_PROG_CXX_C_O' => 1, + 'AC_PROG_LIBTOOL' => 1, 'sinclude' => 1, - 'AM_PROG_FC_C_O' => 1, - 'AC_INIT' => 1, - 'LT_CONFIG_LTDL_DIR' => 1, - 'AM_PROG_AR' => 1, + 'AC_FC_PP_SRCEXT' => 1, + 'AM_GNU_GETTEXT_INTL_SUBDIR' => 1, + 'AM_PROG_MKDIR_P' => 1, + 'AC_SUBST' => 1, + 'm4_include' => 1, + 'LT_SUPPORTED_TAG' => 1, + '_AM_COND_ELSE' => 1, + '_AM_COND_IF' => 1, 'AM_PROG_F77_C_O' => 1, + 'm4_sinclude' => 1, + 'AH_OUTPUT' => 1, + 'include' => 1, 'AC_SUBST_TRACE' => 1, - 'AM_PROG_MOC' => 1, + 'AM_PROG_CC_C_O' => 1, + 'AC_CONFIG_LIBOBJ_DIR' => 1, 'AC_FC_SRCEXT' => 1, - 'LT_INIT' => 1, - 'AC_DEFINE_TRACE_LITERAL' => 1, - 'AM_ENABLE_MULTILIB' => 1, - 'LT_SUPPORTED_TAG' => 1, - 'AC_CANONICAL_HOST' => 1, - '_AM_MAKEFILE_INCLUDE' => 1, + 'LT_CONFIG_LTDL_DIR' => 1, + '_m4_warn' => 1, + 'AM_MAINTAINER_MODE' => 1, + 'AM_MAKEFILE_INCLUDE' => 1, + 'AC_CONFIG_LINKS' => 1, + 'm4_pattern_forbid' => 1, + 'AM_GNU_GETTEXT' => 1, + 'AC_CANONICAL_SYSTEM' => 1, + 'AM_EXTRA_RECURSIVE_TARGETS' => 1, + 'AC_CONFIG_AUX_DIR' => 1, 'AM_INIT_AUTOMAKE' => 1, - '_AM_COND_ENDIF' => 1, - 'AM_PROG_CXX_C_O' => 1, - 'AC_SUBST' => 1, - 'AC_REQUIRE_AUX_FILE' => 1, + '_AM_MAKEFILE_INCLUDE' => 1, '_AM_SUBST_NOTMAKE' => 1, - 'm4_pattern_allow' => 1, - 'AM_MAKEFILE_INCLUDE' => 1, - 'm4_sinclude' => 1, + 'AC_FC_FREEFORM' => 1, + 'AM_ENABLE_MULTILIB' => 1, + 'AC_CONFIG_FILES' => 1, + 'AM_CONDITIONAL' => 1, '_LT_AC_TAGCONFIG' => 1, + 'AC_LIBSOURCE' => 1 + } + ], 'Autom4te::Request' ), + bless( [ + '1', + 1, + [ + '/usr/share/autoconf' + ], + [ + '/usr/share/autoconf/autoconf/autoconf.m4f', + '-', + '/usr/share/aclocal-1.16/internal/ac-config-macro-dirs.m4', + '/usr/share/aclocal-1.16/amversion.m4', + '/usr/share/aclocal-1.16/auxdir.m4', + '/usr/share/aclocal-1.16/cond.m4', + '/usr/share/aclocal-1.16/depend.m4', + '/usr/share/aclocal-1.16/depout.m4', + '/usr/share/aclocal-1.16/init.m4', + '/usr/share/aclocal-1.16/install-sh.m4', + '/usr/share/aclocal-1.16/lead-dot.m4', + '/usr/share/aclocal-1.16/make.m4', + '/usr/share/aclocal-1.16/missing.m4', + '/usr/share/aclocal-1.16/options.m4', + '/usr/share/aclocal-1.16/prog-cc-c-o.m4', + '/usr/share/aclocal-1.16/runlog.m4', + '/usr/share/aclocal-1.16/sanity.m4', + '/usr/share/aclocal-1.16/silent.m4', + '/usr/share/aclocal-1.16/strip.m4', + '/usr/share/aclocal-1.16/substnot.m4', + '/usr/share/aclocal-1.16/tar.m4', + 'm4/gtk-2.0.m4', + 'm4/libxml2.m4', + 'm4/pkg.m4', + 'configure.ac' + ], + { + 'm4_pattern_allow' => 1, 'AM_AUTOMAKE_VERSION' => 1, + 'PKG_PROG_PKG_CONFIG' => 1, + '_AM_SET_OPTIONS' => 1, + '_AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, + 'AM_MAKE_INCLUDE' => 1, + 'PKG_CHECK_MODULES' => 1, + 'AM_PROG_INSTALL_STRIP' => 1, + 'AM_SET_DEPDIR' => 1, + 'AM_PATH_XML2' => 1, + 'm4_include' => 1, + 'AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, + 'AM_SILENT_RULES' => 1, + 'AM_SET_LEADING_DOT' => 1, + '_AM_AUTOCONF_VERSION' => 1, + 'AM_MISSING_PROG' => 1, + '_AM_IF_OPTION' => 1, + 'AM_SANITY_CHECK' => 1, + '_AC_AM_CONFIG_HEADER_HOOK' => 1, + '_PKG_SHORT_ERRORS_SUPPORTED' => 1, + '_AM_CONFIG_MACRO_DIRS' => 1, + 'AU_DEFUN' => 1, + 'AM_AUX_DIR_EXPAND' => 1, + 'AC_DEFUN_ONCE' => 1, 'm4_pattern_forbid' => 1, - 'AM_NLS' => 1, - 'AC_CONFIG_LINKS' => 1, + '_AM_SUBST_NOTMAKE' => 1, + 'AM_INIT_AUTOMAKE' => 1, + 'AM_PATH_GTK_2_0' => 1, + 'AC_CONFIG_MACRO_DIR_TRACE' => 1, + 'AM_CONDITIONAL' => 1, + '_AM_SET_OPTION' => 1, + 'PKG_CHECK_EXISTS' => 1, + 'AM_MISSING_HAS_RUN' => 1, + 'AM_SUBST_NOTMAKE' => 1, 'include' => 1, - 'AM_MAINTAINER_MODE' => 1, - 'AM_XGETTEXT_OPTION' => 1, - '_m4_warn' => 1 + 'AC_DEFUN' => 1, + '_AM_DEPENDENCIES' => 1, + 'AM_PROG_INSTALL_SH' => 1, + 'AM_RUN_LOG' => 1, + 'AM_SET_CURRENT_AUTOMAKE_VERSION' => 1, + 'AM_DEP_TRACK' => 1, + 'AM_PROG_CC_C_O' => 1, + '_m4_warn' => 1, + '_AM_PROG_TAR' => 1, + 'AC_CONFIG_MACRO_DIR' => 1, + '_AM_PROG_CC_C_O' => 1, + '_AM_MANGLE_OPTION' => 1 } ], 'Autom4te::Request' ) ); diff -Naur osmo-0.2.12-p1/autom4te.cache/traces.0 osmo-0.2.12-p2/autom4te.cache/traces.0 --- osmo-0.2.12-p1/autom4te.cache/traces.0 2022-01-16 19:38:24.936970485 +0800 +++ osmo-0.2.12-p2/autom4te.cache/traces.0 2022-01-16 19:43:38.750312897 +0800 @@ -1,6 +1,9 @@ -m4trace:aclocal.m4:972: -1- m4_include([m4/gtk-2.0.m4]) -m4trace:aclocal.m4:973: -1- m4_include([m4/libxml2.m4]) -m4trace:aclocal.m4:974: -1- m4_include([m4/pkg.m4]) +m4trace:aclocal.m4:679: -1- AC_SUBST([am__quote]) +m4trace:aclocal.m4:679: -1- AC_SUBST_TRACE([am__quote]) +m4trace:aclocal.m4:679: -1- m4_pattern_allow([^am__quote$]) +m4trace:aclocal.m4:1081: -1- m4_include([m4/gtk-2.0.m4]) +m4trace:aclocal.m4:1082: -1- m4_include([m4/libxml2.m4]) +m4trace:aclocal.m4:1083: -1- m4_include([m4/pkg.m4]) m4trace:configure.ac:5: -1- AC_INIT([Osmo], [0.2.12], [pasp@users.sf.net]) m4trace:configure.ac:5: -1- m4_pattern_forbid([^_?A[CHUM]_]) m4trace:configure.ac:5: -1- m4_pattern_forbid([_AC_]) @@ -151,7 +154,7 @@ m4trace:configure.ac:5: -1- m4_pattern_allow([^target_alias$]) m4trace:configure.ac:7: -1- AM_INIT_AUTOMAKE([-Wall foreign]) m4trace:configure.ac:7: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) -m4trace:configure.ac:7: -1- AM_AUTOMAKE_VERSION([1.11.6]) +m4trace:configure.ac:7: -1- AM_AUTOMAKE_VERSION([1.16.1]) m4trace:configure.ac:7: -1- AC_REQUIRE_AUX_FILE([install-sh]) m4trace:configure.ac:7: -1- AC_SUBST([INSTALL_PROGRAM]) m4trace:configure.ac:7: -1- AC_SUBST_TRACE([INSTALL_PROGRAM]) @@ -212,7 +215,7 @@ m4trace:configure.ac:7: -1- AC_SUBST([MKDIR_P]) m4trace:configure.ac:7: -1- AC_SUBST_TRACE([MKDIR_P]) m4trace:configure.ac:7: -1- m4_pattern_allow([^MKDIR_P$]) -m4trace:configure.ac:7: -1- AC_SUBST([mkdir_p], ["$MKDIR_P"]) +m4trace:configure.ac:7: -1- AC_SUBST([mkdir_p], ['$(MKDIR_P)']) m4trace:configure.ac:7: -1- AC_SUBST_TRACE([mkdir_p]) m4trace:configure.ac:7: -1- m4_pattern_allow([^mkdir_p$]) m4trace:configure.ac:7: -1- AC_SUBST([AWK]) @@ -233,6 +236,22 @@ m4trace:configure.ac:7: -1- AC_SUBST([am__untar]) m4trace:configure.ac:7: -1- AC_SUBST_TRACE([am__untar]) m4trace:configure.ac:7: -1- m4_pattern_allow([^am__untar$]) +m4trace:configure.ac:7: -1- AM_SILENT_RULES +m4trace:configure.ac:7: -1- AC_SUBST([AM_V]) +m4trace:configure.ac:7: -1- AC_SUBST_TRACE([AM_V]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AM_V$]) +m4trace:configure.ac:7: -1- _AM_SUBST_NOTMAKE([AM_V]) +m4trace:configure.ac:7: -1- AC_SUBST([AM_DEFAULT_V]) +m4trace:configure.ac:7: -1- AC_SUBST_TRACE([AM_DEFAULT_V]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AM_DEFAULT_V$]) +m4trace:configure.ac:7: -1- _AM_SUBST_NOTMAKE([AM_DEFAULT_V]) +m4trace:configure.ac:7: -1- AC_SUBST([AM_DEFAULT_VERBOSITY]) +m4trace:configure.ac:7: -1- AC_SUBST_TRACE([AM_DEFAULT_VERBOSITY]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AM_DEFAULT_VERBOSITY$]) +m4trace:configure.ac:7: -1- AC_SUBST([AM_BACKSLASH]) +m4trace:configure.ac:7: -1- AC_SUBST_TRACE([AM_BACKSLASH]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AM_BACKSLASH$]) +m4trace:configure.ac:7: -1- _AM_SUBST_NOTMAKE([AM_BACKSLASH]) m4trace:configure.ac:9: -1- AC_CONFIG_HEADERS([config.h]) m4trace:configure.ac:11: -1- m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4trace:configure.ac:11: -1- m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) @@ -282,15 +301,13 @@ m4trace:configure.ac:35: -1- AC_SUBST([OBJEXT], [$ac_cv_objext]) m4trace:configure.ac:35: -1- AC_SUBST_TRACE([OBJEXT]) m4trace:configure.ac:35: -1- m4_pattern_allow([^OBJEXT$]) +m4trace:configure.ac:35: -1- AC_REQUIRE_AUX_FILE([compile]) m4trace:configure.ac:35: -1- AC_SUBST([DEPDIR], ["${am__leading_dot}deps"]) m4trace:configure.ac:35: -1- AC_SUBST_TRACE([DEPDIR]) m4trace:configure.ac:35: -1- m4_pattern_allow([^DEPDIR$]) m4trace:configure.ac:35: -1- AC_SUBST([am__include]) m4trace:configure.ac:35: -1- AC_SUBST_TRACE([am__include]) m4trace:configure.ac:35: -1- m4_pattern_allow([^am__include$]) -m4trace:configure.ac:35: -1- AC_SUBST([am__quote]) -m4trace:configure.ac:35: -1- AC_SUBST_TRACE([am__quote]) -m4trace:configure.ac:35: -1- m4_pattern_allow([^am__quote$]) m4trace:configure.ac:35: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) m4trace:configure.ac:35: -1- AC_SUBST([AMDEP_TRUE]) m4trace:configure.ac:35: -1- AC_SUBST_TRACE([AMDEP_TRUE]) diff -Naur osmo-0.2.12-p1/autom4te.cache/traces.1 osmo-0.2.12-p2/autom4te.cache/traces.1 --- osmo-0.2.12-p1/autom4te.cache/traces.1 1970-01-01 08:00:00.000000000 +0800 +++ osmo-0.2.12-p2/autom4te.cache/traces.1 2022-01-16 19:43:37.923646207 +0800 @@ -0,0 +1,1486 @@ +m4trace:/usr/share/aclocal-1.16/amversion.m4:14: -1- AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.16' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.16.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) +m4trace:/usr/share/aclocal-1.16/amversion.m4:33: -1- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.16.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) +m4trace:/usr/share/aclocal-1.16/auxdir.m4:47: -1- AC_DEFUN([AM_AUX_DIR_EXPAND], [AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` +]) +m4trace:/usr/share/aclocal-1.16/cond.m4:12: -1- AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) +m4trace:/usr/share/aclocal-1.16/depend.m4:26: -1- AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) +m4trace:/usr/share/aclocal-1.16/depend.m4:163: -1- AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) +m4trace:/usr/share/aclocal-1.16/depend.m4:171: -1- AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) +m4trace:/usr/share/aclocal-1.16/depout.m4:11: -1- AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + AS_CASE([$CONFIG_FILES], + [*\'*], [eval set x "$CONFIG_FILES"], + [*], [set x $CONFIG_FILES]) + shift + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf + do + # Strip MF so we end up with the name of the file. + am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`AS_DIRNAME(["$am_mf"])` + am_filepart=`AS_BASENAME(["$am_mf"])` + AM_RUN_LOG([cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles]) || am_rc=$? + done + if test $am_rc -ne 0; then + AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking).]) + fi + AS_UNSET([am_dirpart]) + AS_UNSET([am_filepart]) + AS_UNSET([am_mf]) + AS_UNSET([am_rc]) + rm -f conftest-deps.mk +} +]) +m4trace:/usr/share/aclocal-1.16/depout.m4:62: -1- AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])]) +m4trace:/usr/share/aclocal-1.16/init.m4:29: -1- AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. +]) +m4trace:/usr/share/aclocal-1.16/init.m4:186: -1- AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) +m4trace:/usr/share/aclocal-1.16/install-sh.m4:11: -1- AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) +m4trace:/usr/share/aclocal-1.16/lead-dot.m4:10: -1- AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) +m4trace:/usr/share/aclocal-1.16/make.m4:13: -1- AC_DEFUN([AM_MAKE_INCLUDE], [AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive]) +cat > confinc.mk << 'END' +am__doit: + @echo this is the am__doit target >confinc.out +.PHONY: am__doit +END +am__include="#" +am__quote= +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) + AS_CASE([$?:`cat confinc.out 2>/dev/null`], + ['0:this is the am__doit target'], + [AS_CASE([$s], + [BSD], [am__include='.include' am__quote='"'], + [am__include='include' am__quote=''])]) + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +AC_MSG_RESULT([${_am_result}]) +AC_SUBST([am__include])]) +m4trace:/usr/share/aclocal-1.16/make.m4:42: -1- m4_pattern_allow([^am__quote$]) +m4trace:/usr/share/aclocal-1.16/missing.m4:11: -1- AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) +m4trace:/usr/share/aclocal-1.16/missing.m4:20: -1- AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) +m4trace:/usr/share/aclocal-1.16/options.m4:11: -1- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) +m4trace:/usr/share/aclocal-1.16/options.m4:17: -1- AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) +m4trace:/usr/share/aclocal-1.16/options.m4:23: -1- AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) +m4trace:/usr/share/aclocal-1.16/options.m4:29: -1- AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) +m4trace:/usr/share/aclocal-1.16/prog-cc-c-o.m4:12: -1- AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) +m4trace:/usr/share/aclocal-1.16/prog-cc-c-o.m4:47: -1- AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) +m4trace:/usr/share/aclocal-1.16/runlog.m4:12: -1- AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) +m4trace:/usr/share/aclocal-1.16/sanity.m4:11: -1- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +AC_MSG_RESULT([yes]) +]) +m4trace:/usr/share/aclocal-1.16/silent.m4:12: -1- AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) +m4trace:/usr/share/aclocal-1.16/strip.m4:17: -1- AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) +m4trace:/usr/share/aclocal-1.16/substnot.m4:12: -1- AC_DEFUN([_AM_SUBST_NOTMAKE]) +m4trace:/usr/share/aclocal-1.16/substnot.m4:17: -1- AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) +m4trace:/usr/share/aclocal-1.16/tar.m4:23: -1- AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) +m4trace:m4/gtk-2.0.m4:8: -1- AC_DEFUN([AM_PATH_GTK_2_0], [dnl +dnl Get the cflags and libraries from pkg-config +dnl +AC_ARG_ENABLE(gtktest, [ --disable-gtktest do not try to compile and run a test GTK+ program], + , enable_gtktest=yes) + + pkg_config_args=gtk+-2.0 + for module in . $4 + do + case "$module" in + gthread) + pkg_config_args="$pkg_config_args gthread-2.0" + ;; + esac + done + + no_gtk="" + + AC_PATH_PROG(PKG_CONFIG, pkg-config, no) + + if test x$PKG_CONFIG != xno ; then + if pkg-config --atleast-pkgconfig-version 0.7 ; then + : + else + echo "*** pkg-config too old; version 0.7 or better required." + no_gtk=yes + PKG_CONFIG=no + fi + else + no_gtk=yes + fi + + min_gtk_version=ifelse([$1], ,2.0.0,$1) + AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version) + + if test x$PKG_CONFIG != xno ; then + ## don't try to run the test against uninstalled libtool libs + if $PKG_CONFIG --uninstalled $pkg_config_args; then + echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH" + enable_gtktest=no + fi + + if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then + : + else + no_gtk=yes + fi + fi + + if test x"$no_gtk" = x ; then + GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags` + GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs` + gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test "x$enable_gtktest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $GTK_CFLAGS" + LIBS="$GTK_LIBS $LIBS" +dnl +dnl Now check if the installed GTK+ is sufficiently new. (Also sanity +dnl checks the results of pkg-config to some extent) +dnl + rm -f conf.gtktest + AC_TRY_RUN([ +#include +#include +#include + +int +main () +{ + int major, minor, micro; + char *tmp_version; + + system ("touch conf.gtktest"); + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = g_strdup("$min_gtk_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_gtk_version"); + exit(1); + } + + if ((gtk_major_version != $gtk_config_major_version) || + (gtk_minor_version != $gtk_config_minor_version) || + (gtk_micro_version != $gtk_config_micro_version)) + { + printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", + $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, + gtk_major_version, gtk_minor_version, gtk_micro_version); + printf ("*** was found! If pkg-config was correct, then it is best\n"); + printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); + printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); + printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); + printf("*** required on your system.\n"); + printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); + printf("*** to point to the correct configuration files\n"); + } + else if ((gtk_major_version != GTK_MAJOR_VERSION) || + (gtk_minor_version != GTK_MINOR_VERSION) || + (gtk_micro_version != GTK_MICRO_VERSION)) + { + printf("*** GTK+ header files (version %d.%d.%d) do not match\n", + GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); + printf("*** library (version %d.%d.%d)\n", + gtk_major_version, gtk_minor_version, gtk_micro_version); + } + else + { + if ((gtk_major_version > major) || + ((gtk_major_version == major) && (gtk_minor_version > minor)) || + ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", + gtk_major_version, gtk_minor_version, gtk_micro_version); + printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", + major, minor, micro); + printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); + printf("***\n"); + printf("*** If you have already installed a sufficiently new version, this error\n"); + printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); + printf("*** being found. The easiest way to fix this is to remove the old version\n"); + printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n"); + printf("*** correct copy of pkg-config. (In this case, you will have to\n"); + printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); + printf("*** so that the correct libraries are found at run-time))\n"); + } + } + return 1; +} +],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_gtk" = x ; then + AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT(no) + if test "$PKG_CONFIG" = "no" ; then + echo "*** A new enough version of pkg-config was not found." + echo "*** See http://pkgconfig.sourceforge.net" + else + if test -f conf.gtktest ; then + : + else + echo "*** Could not run GTK+ test program, checking why..." + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $GTK_CFLAGS" + LIBS="$LIBS $GTK_LIBS" + AC_TRY_LINK([ +#include +#include +], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding GTK+ or finding the wrong" + echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + GTK_CFLAGS="" + GTK_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(GTK_CFLAGS) + AC_SUBST(GTK_LIBS) + rm -f conf.gtktest +]) +m4trace:m4/libxml2.m4:12: -1- AC_DEFUN([AM_PATH_XML2], [ +AC_ARG_WITH(xml-prefix, + [ --with-xml-prefix=PFX Prefix where libxml is installed (optional)], + xml_config_prefix="$withval", xml_config_prefix="") +AC_ARG_WITH(xml-exec-prefix, + [ --with-xml-exec-prefix=PFX Exec prefix where libxml is installed (optional)], + xml_config_exec_prefix="$withval", xml_config_exec_prefix="") +AC_ARG_ENABLE(xmltest, + [ --disable-xmltest Do not try to compile and run a test LIBXML program],, + enable_xmltest=yes) + + if test x$xml_config_exec_prefix != x ; then + xml_config_args="$xml_config_args" + if test x${XML2_CONFIG+set} != xset ; then + XML2_CONFIG=$xml_config_exec_prefix/bin/xml2-config + fi + fi + if test x$xml_config_prefix != x ; then + xml_config_args="$xml_config_args --prefix=$xml_config_prefix" + if test x${XML2_CONFIG+set} != xset ; then + XML2_CONFIG=$xml_config_prefix/bin/xml2-config + fi + fi + + AC_PATH_PROG(XML2_CONFIG, xml2-config, no) + min_xml_version=ifelse([$1], ,2.0.0,[$1]) + AC_MSG_CHECKING(for libxml - version >= $min_xml_version) + no_xml="" + if test "$XML2_CONFIG" = "no" ; then + no_xml=yes + else + XML_CPPFLAGS=`$XML2_CONFIG $xml_config_args --cflags` + XML_LIBS=`$XML2_CONFIG $xml_config_args --libs` + xml_config_major_version=`$XML2_CONFIG $xml_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + xml_config_minor_version=`$XML2_CONFIG $xml_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + xml_config_micro_version=`$XML2_CONFIG $xml_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test "x$enable_xmltest" = "xyes" ; then + ac_save_CPPFLAGS="$CPPFLAGS" + ac_save_LIBS="$LIBS" + CPPFLAGS="$CPPFLAGS $XML_CPPFLAGS" + LIBS="$XML_LIBS $LIBS" +dnl +dnl Now check if the installed libxml is sufficiently new. +dnl (Also sanity checks the results of xml2-config to some extent) +dnl + rm -f conf.xmltest + AC_TRY_RUN([ +#include +#include +#include +#include + +int +main() +{ + int xml_major_version, xml_minor_version, xml_micro_version; + int major, minor, micro; + char *tmp_version; + + system("touch conf.xmltest"); + + /* Capture xml2-config output via autoconf/configure variables */ + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = (char *)strdup("$min_xml_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string from xml2-config\n", "$min_xml_version"); + exit(1); + } + free(tmp_version); + + /* Capture the version information from the header files */ + tmp_version = (char *)strdup(LIBXML_DOTTED_VERSION); + if (sscanf(tmp_version, "%d.%d.%d", &xml_major_version, &xml_minor_version, &xml_micro_version) != 3) { + printf("%s, bad version string from libxml includes\n", "LIBXML_DOTTED_VERSION"); + exit(1); + } + free(tmp_version); + + /* Compare xml2-config output to the libxml headers */ + if ((xml_major_version != $xml_config_major_version) || + (xml_minor_version != $xml_config_minor_version) || + (xml_micro_version != $xml_config_micro_version)) + { + printf("*** libxml header files (version %d.%d.%d) do not match\n", + xml_major_version, xml_minor_version, xml_micro_version); + printf("*** xml2-config (version %d.%d.%d)\n", + $xml_config_major_version, $xml_config_minor_version, $xml_config_micro_version); + return 1; + } +/* Compare the headers to the library to make sure we match */ + /* Less than ideal -- doesn't provide us with return value feedback, + * only exits if there's a serious mismatch between header and library. + */ + LIBXML_TEST_VERSION; + + /* Test that the library is greater than our minimum version */ + if ((xml_major_version > major) || + ((xml_major_version == major) && (xml_minor_version > minor)) || + ((xml_major_version == major) && (xml_minor_version == minor) && + (xml_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** An old version of libxml (%d.%d.%d) was found.\n", + xml_major_version, xml_minor_version, xml_micro_version); + printf("*** You need a version of libxml newer than %d.%d.%d. The latest version of\n", + major, minor, micro); + printf("*** libxml is always available from ftp://ftp.xmlsoft.org.\n"); + printf("***\n"); + printf("*** If you have already installed a sufficiently new version, this error\n"); + printf("*** probably means that the wrong copy of the xml2-config shell script is\n"); + printf("*** being found. The easiest way to fix this is to remove the old version\n"); + printf("*** of LIBXML, but you can also set the XML2_CONFIG environment to point to the\n"); + printf("*** correct copy of xml2-config. (In this case, you will have to\n"); + printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); + printf("*** so that the correct libraries are found at run-time))\n"); + } + return 1; +} +],, no_xml=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CPPFLAGS="$ac_save_CPPFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + + if test "x$no_xml" = x ; then + AC_MSG_RESULT(yes (version $xml_config_major_version.$xml_config_minor_version.$xml_config_micro_version)) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT(no) + if test "$XML2_CONFIG" = "no" ; then + echo "*** The xml2-config script installed by LIBXML could not be found" + echo "*** If libxml was installed in PREFIX, make sure PREFIX/bin is in" + echo "*** your path, or set the XML2_CONFIG environment variable to the" + echo "*** full path to xml2-config." + else + if test -f conf.xmltest ; then + : + else + echo "*** Could not run libxml test program, checking why..." + CPPFLAGS="$CPPFLAGS $XML_CPPFLAGS" + LIBS="$LIBS $XML_LIBS" + AC_TRY_LINK([ +#include +#include +], [ LIBXML_TEST_VERSION; return 0;], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding LIBXML or finding the wrong" + echo "*** version of LIBXML. If it is not finding LIBXML, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means LIBXML was incorrectly installed" + echo "*** or that you have moved LIBXML since it was installed. In the latter case, you" + echo "*** may want to edit the xml2-config script: $XML2_CONFIG" ]) + CPPFLAGS="$ac_save_CPPFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + + XML_CPPFLAGS="" + XML_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(XML_CPPFLAGS) + AC_SUBST(XML_LIBS) + rm -f conf.xmltest +]) +m4trace:m4/pkg.m4:26: -1- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) +AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=m4_default([$1], [0.9.0]) + AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + PKG_CONFIG="" + fi + +fi[]dnl +]) +m4trace:m4/pkg.m4:56: -1- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +if test -n "$PKG_CONFIG" && \ + AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then + m4_ifval([$2], [$2], [:]) +m4_ifvaln([$3], [else + $3])dnl +fi]) +m4trace:m4/pkg.m4:84: -1- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi[]dnl +]) +m4trace:m4/pkg.m4:104: -1- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +pkg_failed=no +AC_MSG_CHECKING([for $1]) + +_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +and $1[]_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details.]) + +if test $pkg_failed = yes; then + _PKG_SHORT_ERRORS_SUPPORTED + if test $_pkg_short_errors_supported = yes; then + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` + else + $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` + fi + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + + ifelse([$4], , [AC_MSG_ERROR(dnl +[Package requirements ($2) were not met: + +$$1_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +_PKG_TEXT +])], + [AC_MSG_RESULT([no]) + $4]) +elif test $pkg_failed = untried; then + ifelse([$4], , [AC_MSG_FAILURE(dnl +[The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +_PKG_TEXT + +To get pkg-config, see .])], + [$4]) +else + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + AC_MSG_RESULT([yes]) + ifelse([$3], , :, [$3]) +fi[]dnl +]) +m4trace:configure.ac:5: -1- m4_pattern_forbid([^_?A[CHUM]_]) +m4trace:configure.ac:5: -1- m4_pattern_forbid([_AC_]) +m4trace:configure.ac:5: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) +m4trace:configure.ac:5: -1- m4_pattern_allow([^AS_FLAGS$]) +m4trace:configure.ac:5: -1- m4_pattern_forbid([^_?m4_]) +m4trace:configure.ac:5: -1- m4_pattern_forbid([^dnl$]) +m4trace:configure.ac:5: -1- m4_pattern_forbid([^_?AS_]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^SHELL$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PATH_SEPARATOR$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_NAME$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_VERSION$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_STRING$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_URL$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^exec_prefix$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^prefix$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^program_transform_name$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^bindir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^sbindir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^libexecdir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^datarootdir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^datadir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^sysconfdir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^sharedstatedir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^localstatedir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^includedir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^oldincludedir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^docdir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^infodir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^htmldir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^dvidir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^pdfdir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^psdir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^libdir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^localedir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^mandir$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_NAME$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_VERSION$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_STRING$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^PACKAGE_URL$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^DEFS$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^ECHO_C$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^ECHO_N$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^ECHO_T$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^LIBS$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^build_alias$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^host_alias$]) +m4trace:configure.ac:5: -1- m4_pattern_allow([^target_alias$]) +m4trace:configure.ac:6: -1- AC_CONFIG_MACRO_DIR([m4]) +m4trace:configure.ac:7: -1- AM_INIT_AUTOMAKE([-Wall foreign]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) +m4trace:configure.ac:7: -1- AM_SET_CURRENT_AUTOMAKE_VERSION +m4trace:configure.ac:7: -1- AM_AUTOMAKE_VERSION([1.16.1]) +m4trace:configure.ac:7: -1- _AM_AUTOCONF_VERSION([2.69]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^INSTALL_DATA$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^am__isrc$]) +m4trace:configure.ac:7: -1- _AM_SUBST_NOTMAKE([am__isrc]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^CYGPATH_W$]) +m4trace:configure.ac:7: -1- _AM_SET_OPTIONS([-Wall foreign]) +m4trace:configure.ac:7: -1- _AM_SET_OPTION([-Wall]) +m4trace:configure.ac:7: -2- _AM_MANGLE_OPTION([-Wall]) +m4trace:configure.ac:7: -1- _AM_SET_OPTION([foreign]) +m4trace:configure.ac:7: -2- _AM_MANGLE_OPTION([foreign]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^VERSION$]) +m4trace:configure.ac:7: -1- _AM_IF_OPTION([no-define], [], [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])]) +m4trace:configure.ac:7: -2- _AM_MANGLE_OPTION([no-define]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^VERSION$]) +m4trace:configure.ac:7: -1- AM_SANITY_CHECK +m4trace:configure.ac:7: -1- AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +m4trace:configure.ac:7: -1- AM_MISSING_HAS_RUN +m4trace:configure.ac:7: -1- AM_AUX_DIR_EXPAND +m4trace:configure.ac:7: -1- m4_pattern_allow([^ACLOCAL$]) +m4trace:configure.ac:7: -1- AM_MISSING_PROG([AUTOCONF], [autoconf]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AUTOCONF$]) +m4trace:configure.ac:7: -1- AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AUTOMAKE$]) +m4trace:configure.ac:7: -1- AM_MISSING_PROG([AUTOHEADER], [autoheader]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AUTOHEADER$]) +m4trace:configure.ac:7: -1- AM_MISSING_PROG([MAKEINFO], [makeinfo]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^MAKEINFO$]) +m4trace:configure.ac:7: -1- AM_PROG_INSTALL_SH +m4trace:configure.ac:7: -1- m4_pattern_allow([^install_sh$]) +m4trace:configure.ac:7: -1- AM_PROG_INSTALL_STRIP +m4trace:configure.ac:7: -1- m4_pattern_allow([^STRIP$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^MKDIR_P$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^mkdir_p$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AWK$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^SET_MAKE$]) +m4trace:configure.ac:7: -1- AM_SET_LEADING_DOT +m4trace:configure.ac:7: -1- m4_pattern_allow([^am__leading_dot$]) +m4trace:configure.ac:7: -1- _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +m4trace:configure.ac:7: -2- _AM_MANGLE_OPTION([tar-ustar]) +m4trace:configure.ac:7: -1- _AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])]) +m4trace:configure.ac:7: -2- _AM_MANGLE_OPTION([tar-pax]) +m4trace:configure.ac:7: -1- _AM_PROG_TAR([v7]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AMTAR$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^am__tar$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^am__untar$]) +m4trace:configure.ac:7: -1- _AM_IF_OPTION([no-dependencies], [], [AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +m4trace:configure.ac:7: -2- _AM_MANGLE_OPTION([no-dependencies]) +m4trace:configure.ac:7: -1- AM_SILENT_RULES +m4trace:configure.ac:7: -1- m4_pattern_allow([^AM_V$]) +m4trace:configure.ac:7: -1- AM_SUBST_NOTMAKE([AM_V]) +m4trace:configure.ac:7: -1- _AM_SUBST_NOTMAKE([AM_V]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AM_DEFAULT_V$]) +m4trace:configure.ac:7: -1- AM_SUBST_NOTMAKE([AM_DEFAULT_V]) +m4trace:configure.ac:7: -1- _AM_SUBST_NOTMAKE([AM_DEFAULT_V]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AM_DEFAULT_VERBOSITY$]) +m4trace:configure.ac:7: -1- m4_pattern_allow([^AM_BACKSLASH$]) +m4trace:configure.ac:7: -1- _AM_SUBST_NOTMAKE([AM_BACKSLASH]) +m4trace:configure.ac:11: -1- PKG_PROG_PKG_CONFIG +m4trace:configure.ac:11: -1- m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +m4trace:configure.ac:11: -1- m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) +m4trace:configure.ac:11: -1- m4_pattern_allow([^PKG_CONFIG$]) +m4trace:configure.ac:11: -1- m4_pattern_allow([^PKG_CONFIG$]) +m4trace:configure.ac:30: -1- m4_pattern_allow([^NOTES_ENABLED$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^CFLAGS$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^LDFLAGS$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^LIBS$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^CPPFLAGS$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^ac_ct_CC$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^EXEEXT$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^OBJEXT$]) +m4trace:configure.ac:35: -1- _AM_PROG_CC_C_O +m4trace:configure.ac:35: -1- AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) +m4trace:configure.ac:35: -1- _AM_DEPENDENCIES([CC]) +m4trace:configure.ac:35: -1- AM_SET_DEPDIR +m4trace:configure.ac:35: -1- m4_pattern_allow([^DEPDIR$]) +m4trace:configure.ac:35: -1- AM_OUTPUT_DEPENDENCY_COMMANDS +m4trace:configure.ac:35: -1- AM_MAKE_INCLUDE +m4trace:configure.ac:35: -1- AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^am__include$]) +m4trace:configure.ac:35: -1- AM_DEP_TRACK +m4trace:configure.ac:35: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^AMDEP_TRUE$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^AMDEP_FALSE$]) +m4trace:configure.ac:35: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE]) +m4trace:configure.ac:35: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) +m4trace:configure.ac:35: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^am__nodep$]) +m4trace:configure.ac:35: -1- _AM_SUBST_NOTMAKE([am__nodep]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^CCDEPMODE$]) +m4trace:configure.ac:35: -1- AM_CONDITIONAL([am__fastdepCC], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) +m4trace:configure.ac:35: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) +m4trace:configure.ac:35: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE]) +m4trace:configure.ac:35: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE]) +m4trace:configure.ac:39: -1- m4_pattern_allow([^CPP$]) +m4trace:configure.ac:39: -1- m4_pattern_allow([^CPPFLAGS$]) +m4trace:configure.ac:39: -1- m4_pattern_allow([^CPP$]) +m4trace:configure.ac:39: -1- m4_pattern_allow([^GREP$]) +m4trace:configure.ac:39: -1- m4_pattern_allow([^EGREP$]) +m4trace:configure.ac:39: -1- m4_pattern_allow([^STDC_HEADERS$]) +m4trace:configure.ac:43: -1- m4_pattern_allow([^const$]) +m4trace:configure.ac:44: -1- m4_pattern_allow([^TM_IN_SYS_TIME$]) +m4trace:configure.ac:45: -1- m4_pattern_allow([^size_t$]) +m4trace:configure.ac:48: -1- m4_pattern_allow([^LSTAT_FOLLOWS_SLASHED_SYMLINK$]) +m4trace:configure.ac:48: -1- m4_pattern_allow([^LIB@&t@OBJS$]) +m4trace:configure.ac:48: -1- m4_pattern_allow([^LIB@&t@OBJS$]) +m4trace:configure.ac:48: -1- m4_pattern_allow([^HAVE_STAT_EMPTY_STRING_BUG$]) +m4trace:configure.ac:49: -1- m4_pattern_allow([^HAVE_STRFTIME$]) +m4trace:configure.ac:49: -1- m4_pattern_allow([^HAVE_STRFTIME$]) +m4trace:configure.ac:53: -1- m4_pattern_allow([^MSGFMT$]) +m4trace:configure.ac:56: -1- AM_PATH_GTK_2_0([2.12.0], [], [as_fn_error $? "GTK+ not found or too old (version < 2.12)" "$LINENO" 5]) +m4trace:configure.ac:56: -1- m4_pattern_allow([^PKG_CONFIG$]) +m4trace:configure.ac:56: -1- _m4_warn([obsolete], [The macro `AC_TRY_RUN' is obsolete. +You should run autoupdate.], [../../../autoconf-2.69/lib/autoconf/general.m4:2758: AC_TRY_RUN is expanded from... +m4/gtk-2.0.m4:8: AM_PATH_GTK_2_0 is expanded from... +configure.ac:56: the top level]) +m4trace:configure.ac:56: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. +You should run autoupdate.], [../../../autoconf-2.69/lib/autoconf/general.m4:2681: AC_TRY_LINK is expanded from... +m4/gtk-2.0.m4:8: AM_PATH_GTK_2_0 is expanded from... +configure.ac:56: the top level]) +m4trace:configure.ac:56: -1- m4_pattern_allow([^GTK_CFLAGS$]) +m4trace:configure.ac:56: -1- m4_pattern_allow([^GTK_LIBS$]) +m4trace:configure.ac:59: -1- AM_PATH_XML2([2.0.0], [], [as_fn_error $? "You do not appear to have libxml2 installed." "$LINENO" 5]) +m4trace:configure.ac:59: -1- m4_pattern_allow([^XML2_CONFIG$]) +m4trace:configure.ac:59: -1- _m4_warn([obsolete], [The macro `AC_TRY_RUN' is obsolete. +You should run autoupdate.], [../../../autoconf-2.69/lib/autoconf/general.m4:2758: AC_TRY_RUN is expanded from... +m4/libxml2.m4:12: AM_PATH_XML2 is expanded from... +configure.ac:59: the top level]) +m4trace:configure.ac:59: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete. +You should run autoupdate.], [../../../autoconf-2.69/lib/autoconf/general.m4:2681: AC_TRY_LINK is expanded from... +m4/libxml2.m4:12: AM_PATH_XML2 is expanded from... +configure.ac:59: the top level]) +m4trace:configure.ac:59: -1- m4_pattern_allow([^XML_CPPFLAGS$]) +m4trace:configure.ac:59: -1- m4_pattern_allow([^XML_LIBS$]) +m4trace:configure.ac:62: -1- PKG_CHECK_MODULES([GTHREAD], [gthread-2.0 >= 2.6.0]) +m4trace:configure.ac:62: -1- m4_pattern_allow([^GTHREAD_CFLAGS$]) +m4trace:configure.ac:62: -1- m4_pattern_allow([^GTHREAD_LIBS$]) +m4trace:configure.ac:62: -1- PKG_CHECK_EXISTS([gthread-2.0 >= 2.6.0], [pkg_cv_[]GTHREAD_CFLAGS=`$PKG_CONFIG --[]cflags "gthread-2.0 >= 2.6.0" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:62: -1- PKG_CHECK_EXISTS([gthread-2.0 >= 2.6.0], [pkg_cv_[]GTHREAD_LIBS=`$PKG_CONFIG --[]libs "gthread-2.0 >= 2.6.0" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:62: -1- _PKG_SHORT_ERRORS_SUPPORTED +m4trace:configure.ac:72: -1- m4_pattern_allow([^HAVE_LIBGRINGOTTS$]) +m4trace:configure.ac:76: -1- PKG_CHECK_MODULES([LIBARCHIVE], [libarchive >= 3.0.0], [have_libarchive=true], [have_libarchive=false]) +m4trace:configure.ac:76: -1- m4_pattern_allow([^LIBARCHIVE_CFLAGS$]) +m4trace:configure.ac:76: -1- m4_pattern_allow([^LIBARCHIVE_LIBS$]) +m4trace:configure.ac:76: -1- PKG_CHECK_EXISTS([libarchive >= 3.0.0], [pkg_cv_[]LIBARCHIVE_CFLAGS=`$PKG_CONFIG --[]cflags "libarchive >= 3.0.0" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:76: -1- PKG_CHECK_EXISTS([libarchive >= 3.0.0], [pkg_cv_[]LIBARCHIVE_LIBS=`$PKG_CONFIG --[]libs "libarchive >= 3.0.0" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:76: -1- _PKG_SHORT_ERRORS_SUPPORTED +m4trace:configure.ac:81: -1- m4_pattern_allow([^HAVE_LIBARCHIVE$]) +m4trace:configure.ac:85: -1- AM_CONDITIONAL([HAVE_LIBARCHIVE], [test "x$have_libarchive" = "xtrue"]) +m4trace:configure.ac:85: -1- m4_pattern_allow([^HAVE_LIBARCHIVE_TRUE$]) +m4trace:configure.ac:85: -1- m4_pattern_allow([^HAVE_LIBARCHIVE_FALSE$]) +m4trace:configure.ac:85: -1- _AM_SUBST_NOTMAKE([HAVE_LIBARCHIVE_TRUE]) +m4trace:configure.ac:85: -1- _AM_SUBST_NOTMAKE([HAVE_LIBARCHIVE_FALSE]) +m4trace:configure.ac:99: -1- PKG_CHECK_MODULES([LIBICAL], [libical >= 0.33], [have_libical=true], [have_libical=false]) +m4trace:configure.ac:99: -1- m4_pattern_allow([^LIBICAL_CFLAGS$]) +m4trace:configure.ac:99: -1- m4_pattern_allow([^LIBICAL_LIBS$]) +m4trace:configure.ac:99: -1- PKG_CHECK_EXISTS([libical >= 0.33], [pkg_cv_[]LIBICAL_CFLAGS=`$PKG_CONFIG --[]cflags "libical >= 0.33" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:99: -1- PKG_CHECK_EXISTS([libical >= 0.33], [pkg_cv_[]LIBICAL_LIBS=`$PKG_CONFIG --[]libs "libical >= 0.33" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:99: -1- _PKG_SHORT_ERRORS_SUPPORTED +m4trace:configure.ac:102: -1- m4_pattern_allow([^HAVE_LIBICAL$]) +m4trace:configure.ac:107: -1- AM_CONDITIONAL([HAVE_LIBICAL], [test "x$have_libical" = "xtrue"]) +m4trace:configure.ac:107: -1- m4_pattern_allow([^HAVE_LIBICAL_TRUE$]) +m4trace:configure.ac:107: -1- m4_pattern_allow([^HAVE_LIBICAL_FALSE$]) +m4trace:configure.ac:107: -1- _AM_SUBST_NOTMAKE([HAVE_LIBICAL_TRUE]) +m4trace:configure.ac:107: -1- _AM_SUBST_NOTMAKE([HAVE_LIBICAL_FALSE]) +m4trace:configure.ac:110: -1- PKG_CHECK_MODULES([GTKSPELL], [gtkspell-2.0 >= 2.0.5], [have_gtkspell=true], [have_gtkspell=false]) +m4trace:configure.ac:110: -1- m4_pattern_allow([^GTKSPELL_CFLAGS$]) +m4trace:configure.ac:110: -1- m4_pattern_allow([^GTKSPELL_LIBS$]) +m4trace:configure.ac:110: -1- PKG_CHECK_EXISTS([gtkspell-2.0 >= 2.0.5], [pkg_cv_[]GTKSPELL_CFLAGS=`$PKG_CONFIG --[]cflags "gtkspell-2.0 >= 2.0.5" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:110: -1- PKG_CHECK_EXISTS([gtkspell-2.0 >= 2.0.5], [pkg_cv_[]GTKSPELL_LIBS=`$PKG_CONFIG --[]libs "gtkspell-2.0 >= 2.0.5" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:110: -1- _PKG_SHORT_ERRORS_SUPPORTED +m4trace:configure.ac:113: -1- m4_pattern_allow([^HAVE_GTKSPELL$]) +m4trace:configure.ac:118: -1- AM_CONDITIONAL([HAVE_GTKSPELL], [test "x$have_gtkspell" = "xtrue"]) +m4trace:configure.ac:118: -1- m4_pattern_allow([^HAVE_GTKSPELL_TRUE$]) +m4trace:configure.ac:118: -1- m4_pattern_allow([^HAVE_GTKSPELL_FALSE$]) +m4trace:configure.ac:118: -1- _AM_SUBST_NOTMAKE([HAVE_GTKSPELL_TRUE]) +m4trace:configure.ac:118: -1- _AM_SUBST_NOTMAKE([HAVE_GTKSPELL_FALSE]) +m4trace:configure.ac:121: -1- PKG_CHECK_MODULES([LIBNOTIFY], [libnotify >= 0.7.0], [have_libnotify7=true], [have_libnotify7=false]) +m4trace:configure.ac:121: -1- m4_pattern_allow([^LIBNOTIFY_CFLAGS$]) +m4trace:configure.ac:121: -1- m4_pattern_allow([^LIBNOTIFY_LIBS$]) +m4trace:configure.ac:121: -1- PKG_CHECK_EXISTS([libnotify >= 0.7.0], [pkg_cv_[]LIBNOTIFY_CFLAGS=`$PKG_CONFIG --[]cflags "libnotify >= 0.7.0" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:121: -1- PKG_CHECK_EXISTS([libnotify >= 0.7.0], [pkg_cv_[]LIBNOTIFY_LIBS=`$PKG_CONFIG --[]libs "libnotify >= 0.7.0" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:121: -1- _PKG_SHORT_ERRORS_SUPPORTED +m4trace:configure.ac:124: -1- m4_pattern_allow([^HAVE_LIBNOTIFY$]) +m4trace:configure.ac:125: -1- m4_pattern_allow([^HAVE_LIBNOTIFY7$]) +m4trace:configure.ac:128: -1- PKG_CHECK_MODULES([LIBNOTIFY], [libnotify >= 0.4.4], [have_libnotify=true], [have_libnotify=false]) +m4trace:configure.ac:128: -1- m4_pattern_allow([^LIBNOTIFY_CFLAGS$]) +m4trace:configure.ac:128: -1- m4_pattern_allow([^LIBNOTIFY_LIBS$]) +m4trace:configure.ac:128: -1- PKG_CHECK_EXISTS([libnotify >= 0.4.4], [pkg_cv_[]LIBNOTIFY_CFLAGS=`$PKG_CONFIG --[]cflags "libnotify >= 0.4.4" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:128: -1- PKG_CHECK_EXISTS([libnotify >= 0.4.4], [pkg_cv_[]LIBNOTIFY_LIBS=`$PKG_CONFIG --[]libs "libnotify >= 0.4.4" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:128: -1- _PKG_SHORT_ERRORS_SUPPORTED +m4trace:configure.ac:131: -1- m4_pattern_allow([^HAVE_LIBNOTIFY$]) +m4trace:configure.ac:137: -1- AM_CONDITIONAL([TASKS_ENABLED], [test "x$tasks" = "xyes"]) +m4trace:configure.ac:137: -1- m4_pattern_allow([^TASKS_ENABLED_TRUE$]) +m4trace:configure.ac:137: -1- m4_pattern_allow([^TASKS_ENABLED_FALSE$]) +m4trace:configure.ac:137: -1- _AM_SUBST_NOTMAKE([TASKS_ENABLED_TRUE]) +m4trace:configure.ac:137: -1- _AM_SUBST_NOTMAKE([TASKS_ENABLED_FALSE]) +m4trace:configure.ac:138: -1- AM_CONDITIONAL([HAVE_LIBNOTIFY], [test "x$have_libnotify" = "xtrue"]) +m4trace:configure.ac:138: -1- m4_pattern_allow([^HAVE_LIBNOTIFY_TRUE$]) +m4trace:configure.ac:138: -1- m4_pattern_allow([^HAVE_LIBNOTIFY_FALSE$]) +m4trace:configure.ac:138: -1- _AM_SUBST_NOTMAKE([HAVE_LIBNOTIFY_TRUE]) +m4trace:configure.ac:138: -1- _AM_SUBST_NOTMAKE([HAVE_LIBNOTIFY_FALSE]) +m4trace:configure.ac:141: -1- m4_pattern_allow([^TASKS_ENABLED$]) +m4trace:configure.ac:145: -1- PKG_CHECK_MODULES([LIBGTKHTML], [libgtkhtml-2.0 >= 2.2.0], [have_libgtkhtml=true], [have_libgtkhtml=false]) +m4trace:configure.ac:145: -1- m4_pattern_allow([^LIBGTKHTML_CFLAGS$]) +m4trace:configure.ac:145: -1- m4_pattern_allow([^LIBGTKHTML_LIBS$]) +m4trace:configure.ac:145: -1- PKG_CHECK_EXISTS([libgtkhtml-2.0 >= 2.2.0], [pkg_cv_[]LIBGTKHTML_CFLAGS=`$PKG_CONFIG --[]cflags "libgtkhtml-2.0 >= 2.2.0" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:145: -1- PKG_CHECK_EXISTS([libgtkhtml-2.0 >= 2.2.0], [pkg_cv_[]LIBGTKHTML_LIBS=`$PKG_CONFIG --[]libs "libgtkhtml-2.0 >= 2.2.0" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:145: -1- _PKG_SHORT_ERRORS_SUPPORTED +m4trace:configure.ac:154: -1- PKG_CHECK_MODULES([LIBWEBKIT], [webkit-1.0 >= 1.1.15.0], [have_libwebkit=true], [have_libwebkit=false]) +m4trace:configure.ac:154: -1- m4_pattern_allow([^LIBWEBKIT_CFLAGS$]) +m4trace:configure.ac:154: -1- m4_pattern_allow([^LIBWEBKIT_LIBS$]) +m4trace:configure.ac:154: -1- PKG_CHECK_EXISTS([webkit-1.0 >= 1.1.15.0], [pkg_cv_[]LIBWEBKIT_CFLAGS=`$PKG_CONFIG --[]cflags "webkit-1.0 >= 1.1.15.0" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:154: -1- PKG_CHECK_EXISTS([webkit-1.0 >= 1.1.15.0], [pkg_cv_[]LIBWEBKIT_LIBS=`$PKG_CONFIG --[]libs "webkit-1.0 >= 1.1.15.0" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:154: -1- _PKG_SHORT_ERRORS_SUPPORTED +m4trace:configure.ac:173: -1- m4_pattern_allow([^HAVE_LIBGTKHTML$]) +m4trace:configure.ac:174: -1- m4_pattern_allow([^HTMLRENDER$]) +m4trace:configure.ac:180: -1- m4_pattern_allow([^HAVE_LIBWEBKIT$]) +m4trace:configure.ac:181: -1- m4_pattern_allow([^HTMLRENDER$]) +m4trace:configure.ac:185: -1- AM_CONDITIONAL([HAVE_LIBGTKHTML], [test "x$libgtkhtml" = "xyes"]) +m4trace:configure.ac:185: -1- m4_pattern_allow([^HAVE_LIBGTKHTML_TRUE$]) +m4trace:configure.ac:185: -1- m4_pattern_allow([^HAVE_LIBGTKHTML_FALSE$]) +m4trace:configure.ac:185: -1- _AM_SUBST_NOTMAKE([HAVE_LIBGTKHTML_TRUE]) +m4trace:configure.ac:185: -1- _AM_SUBST_NOTMAKE([HAVE_LIBGTKHTML_FALSE]) +m4trace:configure.ac:186: -1- AM_CONDITIONAL([HAVE_LIBWEBKIT], [test "x$libwebkit" = "xyes"]) +m4trace:configure.ac:186: -1- m4_pattern_allow([^HAVE_LIBWEBKIT_TRUE$]) +m4trace:configure.ac:186: -1- m4_pattern_allow([^HAVE_LIBWEBKIT_FALSE$]) +m4trace:configure.ac:186: -1- _AM_SUBST_NOTMAKE([HAVE_LIBWEBKIT_TRUE]) +m4trace:configure.ac:186: -1- _AM_SUBST_NOTMAKE([HAVE_LIBWEBKIT_FALSE]) +m4trace:configure.ac:189: -1- m4_pattern_allow([^CONTACTS_ENABLED$]) +m4trace:configure.ac:193: -1- PKG_CHECK_MODULES([PANGO_1_20], [pango >= 1.20], [HAVE_PANGO_1_20=yes], [HAVE_PANGO_1_20=no]) +m4trace:configure.ac:193: -1- m4_pattern_allow([^PANGO_1_20_CFLAGS$]) +m4trace:configure.ac:193: -1- m4_pattern_allow([^PANGO_1_20_LIBS$]) +m4trace:configure.ac:193: -1- PKG_CHECK_EXISTS([pango >= 1.20], [pkg_cv_[]PANGO_1_20_CFLAGS=`$PKG_CONFIG --[]cflags "pango >= 1.20" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:193: -1- PKG_CHECK_EXISTS([pango >= 1.20], [pkg_cv_[]PANGO_1_20_LIBS=`$PKG_CONFIG --[]libs "pango >= 1.20" 2>/dev/null`], [pkg_failed=yes]) +m4trace:configure.ac:193: -1- _PKG_SHORT_ERRORS_SUPPORTED +m4trace:configure.ac:195: -1- m4_pattern_allow([^HAVE_PANGO_1_20$]) +m4trace:configure.ac:207: -1- m4_pattern_allow([^DEBUG_BUILD$]) +m4trace:configure.ac:216: -1- m4_pattern_allow([^PRINTING_SUPPORT$]) +m4trace:configure.ac:227: -1- m4_pattern_allow([^BACKUP_SUPPORT$]) +m4trace:configure.ac:236: -1- m4_pattern_allow([^configpath$]) +m4trace:configure.ac:239: -1- AM_CONDITIONAL([CONFIGPATH], [test x$configpath != x]) +m4trace:configure.ac:239: -1- m4_pattern_allow([^CONFIGPATH_TRUE$]) +m4trace:configure.ac:239: -1- m4_pattern_allow([^CONFIGPATH_FALSE$]) +m4trace:configure.ac:239: -1- _AM_SUBST_NOTMAKE([CONFIGPATH_TRUE]) +m4trace:configure.ac:239: -1- _AM_SUBST_NOTMAKE([CONFIGPATH_FALSE]) +m4trace:configure.ac:240: -1- m4_pattern_allow([^configdir$]) +m4trace:configure.ac:243: -1- AM_CONDITIONAL([CONFIGDIR], [test x$configdir != x]) +m4trace:configure.ac:243: -1- m4_pattern_allow([^CONFIGDIR_TRUE$]) +m4trace:configure.ac:243: -1- m4_pattern_allow([^CONFIGDIR_FALSE$]) +m4trace:configure.ac:243: -1- _AM_SUBST_NOTMAKE([CONFIGDIR_TRUE]) +m4trace:configure.ac:243: -1- _AM_SUBST_NOTMAKE([CONFIGDIR_FALSE]) +m4trace:configure.ac:265: -1- m4_pattern_allow([^LIB@&t@OBJS$]) +m4trace:configure.ac:265: -1- m4_pattern_allow([^LTLIBOBJS$]) +m4trace:configure.ac:265: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"]) +m4trace:configure.ac:265: -1- m4_pattern_allow([^am__EXEEXT_TRUE$]) +m4trace:configure.ac:265: -1- m4_pattern_allow([^am__EXEEXT_FALSE$]) +m4trace:configure.ac:265: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE]) +m4trace:configure.ac:265: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE]) +m4trace:configure.ac:265: -1- _AC_AM_CONFIG_HEADER_HOOK(["$ac_file"]) +m4trace:configure.ac:265: -1- _AM_OUTPUT_DEPENDENCY_COMMANDS +m4trace:configure.ac:265: -1- AM_RUN_LOG([cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles]) +m4trace:configure.ac:268: -1- AM_CONDITIONAL([WIN32], [test "$WIN32" = "yes"]) +m4trace:configure.ac:268: -1- m4_pattern_allow([^WIN32_TRUE$]) +m4trace:configure.ac:268: -1- m4_pattern_allow([^WIN32_FALSE$]) +m4trace:configure.ac:268: -1- _AM_SUBST_NOTMAKE([WIN32_TRUE]) +m4trace:configure.ac:268: -1- _AM_SUBST_NOTMAKE([WIN32_FALSE]) diff -Naur osmo-0.2.12-p1/compile osmo-0.2.12-p2/compile --- osmo-0.2.12-p1/compile 1970-01-01 08:00:00.000000000 +0800 +++ osmo-0.2.12-p2/compile 2022-01-16 19:43:38.776979564 +0800 @@ -0,0 +1,348 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2018-03-07.03; # UTC + +# Copyright (C) 1999-2018 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ + icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC0" +# time-stamp-end: "; # UTC" +# End: diff -Naur osmo-0.2.12-p1/config.guess osmo-0.2.12-p2/config.guess --- osmo-0.2.12-p1/config.guess 1970-01-01 08:00:00.000000000 +0800 +++ osmo-0.2.12-p2/config.guess 2022-01-16 19:43:39.140312908 +0800 @@ -0,0 +1,1667 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright 1992-2020 Free Software Foundation, Inc. + +timestamp='2020-01-01' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). +# +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. +# +# You can get the latest version of this script from: +# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess +# +# Please send patches to . + + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Options: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright 1992-2020 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +tmp= +# shellcheck disable=SC2172 +trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15 + +set_cc_for_build() { + # prevent multiple calls if $tmp is already set + test "$tmp" && return 0 + : "${TMPDIR=/tmp}" + # shellcheck disable=SC2039 + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } + dummy=$tmp/dummy + case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in + ,,) echo "int x;" > "$dummy.c" + for driver in cc gcc c89 c99 ; do + if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then + CC_FOR_BUILD="$driver" + break + fi + done + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; + esac +} + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if test -f /.attbin/uname ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +case "$UNAME_SYSTEM" in +Linux|GNU|GNU/*) + # If the system lacks a compiler, then just pick glibc. + # We could probably try harder. + LIBC=gnu + + set_cc_for_build + cat <<-EOF > "$dummy.c" + #include + #if defined(__UCLIBC__) + LIBC=uclibc + #elif defined(__dietlibc__) + LIBC=dietlibc + #else + LIBC=gnu + #endif + EOF + eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" + + # If ldd exists, use it to detect musl libc. + if command -v ldd >/dev/null && \ + ldd --version 2>&1 | grep -q ^musl + then + LIBC=musl + fi + ;; +esac + +# Note: order is significant - the case branches are not exclusive. + +case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ + "/sbin/$sysctl" 2>/dev/null || \ + "/usr/sbin/$sysctl" 2>/dev/null || \ + echo unknown)` + case "$UNAME_MACHINE_ARCH" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + earmv*) + arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` + endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` + machine="${arch}${endian}"-unknown + ;; + *) machine="$UNAME_MACHINE_ARCH"-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently (or will in the future) and ABI. + case "$UNAME_MACHINE_ARCH" in + earm*) + os=netbsdelf + ;; + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # Determine ABI tags. + case "$UNAME_MACHINE_ARCH" in + earm*) + expr='s/^earmv[0-9]/-eabi/;s/eb$//' + abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "$UNAME_VERSION" in + Debian*) + release='-gnu' + ;; + *) + release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "$machine-${os}${release}${abi-}" + exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE" + exit ;; + *:LibertyBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` + echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE" + exit ;; + *:MidnightBSD:*:*) + echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE" + exit ;; + *:ekkoBSD:*:*) + echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE" + exit ;; + *:SolidBSD:*:*) + echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE" + exit ;; + *:OS108:*:*) + echo "$UNAME_MACHINE"-unknown-os108_"$UNAME_RELEASE" + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd"$UNAME_RELEASE" + exit ;; + *:MirBSD:*:*) + echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE" + exit ;; + *:Sortix:*:*) + echo "$UNAME_MACHINE"-unknown-sortix + exit ;; + *:Twizzler:*:*) + echo "$UNAME_MACHINE"-unknown-twizzler + exit ;; + *:Redox:*:*) + echo "$UNAME_MACHINE"-unknown-redox + exit ;; + mips:OSF1:*.*) + echo mips-dec-osf1 + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE=alpha ;; + "EV4.5 (21064)") + UNAME_MACHINE=alpha ;; + "LCA4 (21066/21068)") + UNAME_MACHINE=alpha ;; + "EV5 (21164)") + UNAME_MACHINE=alphaev5 ;; + "EV5.6 (21164A)") + UNAME_MACHINE=alphaev56 ;; + "EV5.6 (21164PC)") + UNAME_MACHINE=alphapca56 ;; + "EV5.7 (21164PC)") + UNAME_MACHINE=alphapca57 ;; + "EV6 (21264)") + UNAME_MACHINE=alphaev6 ;; + "EV6.7 (21264A)") + UNAME_MACHINE=alphaev67 ;; + "EV6.8CB (21264C)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8AL (21264B)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8CX (21264D)") + UNAME_MACHINE=alphaev68 ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE=alphaev69 ;; + "EV7 (21364)") + UNAME_MACHINE=alphaev7 ;; + "EV7.9 (21364A)") + UNAME_MACHINE=alphaev79 ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo "$UNAME_MACHINE"-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo "$UNAME_MACHINE"-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix"$UNAME_RELEASE" + exit ;; + arm*:riscos:*:*|arm*:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux"$UNAME_RELEASE" + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + set_cc_for_build + SUN_ARCH=i386 + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH=x86_64 + fi + fi + echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos"$UNAME_RELEASE" + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos"$UNAME_RELEASE" + ;; + sun4) + echo sparc-sun-sunos"$UNAME_RELEASE" + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos"$UNAME_RELEASE" + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint"$UNAME_RELEASE" + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint"$UNAME_RELEASE" + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint"$UNAME_RELEASE" + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint"$UNAME_RELEASE" + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint"$UNAME_RELEASE" + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint"$UNAME_RELEASE" + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten"$UNAME_RELEASE" + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten"$UNAME_RELEASE" + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix"$UNAME_RELEASE" + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix"$UNAME_RELEASE" + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix"$UNAME_RELEASE" + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o "$dummy" "$dummy.c" && + dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`"$dummy" "$dummyarg"` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos"$UNAME_RELEASE" + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] + then + if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ + [ "$TARGET_BINARY_INTERFACE"x = x ] + then + echo m88k-dg-dgux"$UNAME_RELEASE" + else + echo m88k-dg-dguxbcs"$UNAME_RELEASE" + fi + else + echo i586-dg-dgux"$UNAME_RELEASE" + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" + fi + echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV" + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/lslpp ] ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` + else + IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" + fi + echo "$IBM_ARCH"-ibm-aix"$IBM_REV" + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` + case "$UNAME_MACHINE" in + 9000/31?) HP_ARCH=m68000 ;; + 9000/[34]??) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "$sc_cpu_version" in + 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 + 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "$sc_kernel_bits" in + 32) HP_ARCH=hppa2.0n ;; + 64) HP_ARCH=hppa2.0w ;; + '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "$HP_ARCH" = "" ]; then + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ "$HP_ARCH" = hppa2.0w ] + then + set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH=hppa2.0w + else + HP_ARCH=hppa64 + fi + fi + echo "$HP_ARCH"-hp-hpux"$HPUX_REV" + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux"$HPUX_REV" + exit ;; + 3050*:HI-UX:*:*) + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo "$UNAME_MACHINE"-unknown-osf1mk + else + echo "$UNAME_MACHINE"-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE" + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi"$UNAME_RELEASE" + exit ;; + *:BSD/OS:*:*) + echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE" + exit ;; + arm:FreeBSD:*:*) + UNAME_PROCESSOR=`uname -p` + set_cc_for_build + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabi + else + echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabihf + fi + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case "$UNAME_PROCESSOR" in + amd64) + UNAME_PROCESSOR=x86_64 ;; + i386) + UNAME_PROCESSOR=i586 ;; + esac + echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" + exit ;; + i*:CYGWIN*:*) + echo "$UNAME_MACHINE"-pc-cygwin + exit ;; + *:MINGW64*:*) + echo "$UNAME_MACHINE"-pc-mingw64 + exit ;; + *:MINGW*:*) + echo "$UNAME_MACHINE"-pc-mingw32 + exit ;; + *:MSYS*:*) + echo "$UNAME_MACHINE"-pc-msys + exit ;; + i*:PW*:*) + echo "$UNAME_MACHINE"-pc-pw32 + exit ;; + *:Interix*:*) + case "$UNAME_MACHINE" in + x86) + echo i586-pc-interix"$UNAME_RELEASE" + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix"$UNAME_RELEASE" + exit ;; + IA64) + echo ia64-unknown-interix"$UNAME_RELEASE" + exit ;; + esac ;; + i*:UWIN*:*) + echo "$UNAME_MACHINE"-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-pc-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + *:GNU:*:*) + # the GNU system + echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" + exit ;; + *:Minix:*:*) + echo "$UNAME_MACHINE"-unknown-minix + exit ;; + aarch64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' /proc/cpuinfo 2>/dev/null` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC=gnulibc1 ; fi + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + arc:Linux:*:* | arceb:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + arm*:Linux:*:*) + set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi + else + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + cris:Linux:*:*) + echo "$UNAME_MACHINE"-axis-linux-"$LIBC" + exit ;; + crisv32:Linux:*:*) + echo "$UNAME_MACHINE"-axis-linux-"$LIBC" + exit ;; + e2k:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + frv:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + hexagon:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + i*86:Linux:*:*) + echo "$UNAME_MACHINE"-pc-linux-"$LIBC" + exit ;; + ia64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + k1om:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + m32r*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + m68*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + set_cc_for_build + IS_GLIBC=0 + test x"${LIBC}" = xgnu && IS_GLIBC=1 + sed 's/^ //' << EOF > "$dummy.c" + #undef CPU + #undef mips + #undef mipsel + #undef mips64 + #undef mips64el + #if ${IS_GLIBC} && defined(_ABI64) + LIBCABI=gnuabi64 + #else + #if ${IS_GLIBC} && defined(_ABIN32) + LIBCABI=gnuabin32 + #else + LIBCABI=${LIBC} + #endif + #endif + + #if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 + CPU=mipsisa64r6 + #else + #if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 + CPU=mipsisa32r6 + #else + #if defined(__mips64) + CPU=mips64 + #else + CPU=mips + #endif + #endif + #endif + + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + MIPS_ENDIAN=el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + MIPS_ENDIAN= + #else + MIPS_ENDIAN= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`" + test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; } + ;; + mips64el:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + openrisc*:Linux:*:*) + echo or1k-unknown-linux-"$LIBC" + exit ;; + or32:Linux:*:* | or1k*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-"$LIBC" + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-"$LIBC" + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;; + PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;; + *) echo hppa-unknown-linux-"$LIBC" ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-"$LIBC" + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-"$LIBC" + exit ;; + ppc64le:Linux:*:*) + echo powerpc64le-unknown-linux-"$LIBC" + exit ;; + ppcle:Linux:*:*) + echo powerpcle-unknown-linux-"$LIBC" + exit ;; + riscv32:Linux:*:* | riscv64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo "$UNAME_MACHINE"-ibm-linux-"$LIBC" + exit ;; + sh64*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + sh*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + tile*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + vax:Linux:*:*) + echo "$UNAME_MACHINE"-dec-linux-"$LIBC" + exit ;; + x86_64:Linux:*:*) + echo "$UNAME_MACHINE"-pc-linux-"$LIBC" + exit ;; + xtensa*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION" + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo "$UNAME_MACHINE"-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo "$UNAME_MACHINE"-unknown-stop + exit ;; + i*86:atheos:*:*) + echo "$UNAME_MACHINE"-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo "$UNAME_MACHINE"-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos"$UNAME_RELEASE" + exit ;; + i*86:*DOS:*:*) + echo "$UNAME_MACHINE"-pc-msdosdjgpp + exit ;; + i*86:*:4.*:*) + UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL" + else + echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL" + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}" + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL" + else + echo "$UNAME_MACHINE"-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configure will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos"$UNAME_RELEASE" + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos"$UNAME_RELEASE" + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos"$UNAME_RELEASE" + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos"$UNAME_RELEASE" + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv"$UNAME_RELEASE" + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo "$UNAME_MACHINE"-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo "$UNAME_MACHINE"-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux"$UNAME_RELEASE" + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv"$UNAME_RELEASE" + else + echo mips-unknown-sysv"$UNAME_RELEASE" + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + x86_64:Haiku:*:*) + echo x86_64-unknown-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux"$UNAME_RELEASE" + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux"$UNAME_RELEASE" + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux"$UNAME_RELEASE" + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux"$UNAME_RELEASE" + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux"$UNAME_RELEASE" + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux"$UNAME_RELEASE" + exit ;; + SX-ACE:SUPER-UX:*:*) + echo sxace-nec-superux"$UNAME_RELEASE" + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody"$UNAME_RELEASE" + exit ;; + *:Rhapsody:*:*) + echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` + case $UNAME_PROCESSOR in + unknown) UNAME_PROCESSOR=powerpc ;; + esac + if command -v xcode-select > /dev/null 2> /dev/null && \ + ! xcode-select --print-path > /dev/null 2> /dev/null ; then + # Avoid executing cc if there is no toolchain installed as + # cc will be a stub that puts up a graphical alert + # prompting the user to install developer tools. + CC_FOR_BUILD=no_compiler_found + else + set_cc_for_build + fi + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + case $UNAME_PROCESSOR in + i386) UNAME_PROCESSOR=x86_64 ;; + powerpc) UNAME_PROCESSOR=powerpc64 ;; + esac + fi + # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc + if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_PPC >/dev/null + then + UNAME_PROCESSOR=powerpc + fi + elif test "$UNAME_PROCESSOR" = i386 ; then + # uname -m returns i386 or x86_64 + UNAME_PROCESSOR=$UNAME_MACHINE + fi + echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE" + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = x86; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE" + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-*:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSE-*:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSR-*:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSV-*:NONSTOP_KERNEL:*:*) + echo nsv-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSX-*:NONSTOP_KERNEL:*:*) + echo nsx-tandem-nsk"$UNAME_RELEASE" + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE" + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + # shellcheck disable=SC2154 + if test "$cputype" = 386; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo "$UNAME_MACHINE"-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux"$UNAME_RELEASE" + exit ;; + *:DragonFly:*:*) + echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "$UNAME_MACHINE" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" + exit ;; + i*86:rdos:*:*) + echo "$UNAME_MACHINE"-pc-rdos + exit ;; + i*86:AROS:*:*) + echo "$UNAME_MACHINE"-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo "$UNAME_MACHINE"-unknown-esx + exit ;; + amd64:Isilon\ OneFS:*:*) + echo x86_64-unknown-onefs + exit ;; + *:Unleashed:*:*) + echo "$UNAME_MACHINE"-unknown-unleashed"$UNAME_RELEASE" + exit ;; +esac + +# No uname command or uname output not recognized. +set_cc_for_build +cat > "$dummy.c" < +#include +#endif +#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) +#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) +#include +#if defined(_SIZE_T_) || defined(SIGLOST) +#include +#endif +#endif +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); +#endif + +#if defined (vax) +#if !defined (ultrix) +#include +#if defined (BSD) +#if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +#else +#if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +#else + printf ("vax-dec-bsd\n"); exit (0); +#endif +#endif +#else + printf ("vax-dec-bsd\n"); exit (0); +#endif +#else +#if defined(_SIZE_T_) || defined(SIGLOST) + struct utsname un; + uname (&un); + printf ("vax-dec-ultrix%s\n", un.release); exit (0); +#else + printf ("vax-dec-ultrix\n"); exit (0); +#endif +#endif +#endif +#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) +#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) +#if defined(_SIZE_T_) || defined(SIGLOST) + struct utsname *un; + uname (&un); + printf ("mips-dec-ultrix%s\n", un.release); exit (0); +#else + printf ("mips-dec-ultrix\n"); exit (0); +#endif +#endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. +test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; } + +echo "$0: unable to guess system type" >&2 + +case "$UNAME_MACHINE:$UNAME_SYSTEM" in + mips:Linux | mips64:Linux) + # If we got here on MIPS GNU/Linux, output extra information. + cat >&2 <&2 </dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = "$UNAME_MACHINE" +UNAME_RELEASE = "$UNAME_RELEASE" +UNAME_SYSTEM = "$UNAME_SYSTEM" +UNAME_VERSION = "$UNAME_VERSION" +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff -Naur osmo-0.2.12-p1/config.h.in osmo-0.2.12-p2/config.h.in --- osmo-0.2.12-p1/config.h.in 2014-10-15 05:03:44.000000000 +0800 +++ osmo-0.2.12-p2/config.h.in 2022-01-16 19:43:38.413646221 +0800 @@ -27,6 +27,9 @@ /* Defined to 1 if compile with libgringotts support */ #undef HAVE_LIBGRINGOTTS +/* Definded to 1 if compile with libgtkhtml support */ +#undef HAVE_LIBGTKHTML + /* Definded to 1 if compile with libical support */ #undef HAVE_LIBICAL diff -Naur osmo-0.2.12-p1/config.h.in~ osmo-0.2.12-p2/config.h.in~ --- osmo-0.2.12-p1/config.h.in~ 1970-01-01 08:00:00.000000000 +0800 +++ osmo-0.2.12-p2/config.h.in~ 2014-10-15 05:03:44.000000000 +0800 @@ -0,0 +1,156 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Defined if backup support is enabled */ +#undef BACKUP_SUPPORT + +/* Contacts module enabled */ +#undef CONTACTS_ENABLED + +/* Defined if doing a debug build */ +#undef DEBUG_BUILD + +/* Define to 1 if you have the header file. */ +#undef HAVE_FCNTL_H + +/* Define to 1 if you have the `floor' function. */ +#undef HAVE_FLOOR + +/* Definded to 1 if compile with gtkspell support */ +#undef HAVE_GTKSPELL + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Defined to 1 if compile with libarchive support */ +#undef HAVE_LIBARCHIVE + +/* Defined to 1 if compile with libgringotts support */ +#undef HAVE_LIBGRINGOTTS + +/* Definded to 1 if compile with libical support */ +#undef HAVE_LIBICAL + +/* Define to 1 if you have the header file. */ +#undef HAVE_LIBINTL_H + +/* Definded to 1 if compile with libnotify support */ +#undef HAVE_LIBNOTIFY + +/* Definded to 1 if compile with libnotify >= 0.7.0 support */ +#undef HAVE_LIBNOTIFY7 + +/* Definded to 1 if compile with libwebkit support */ +#undef HAVE_LIBWEBKIT + +/* Define to 1 if you have the header file. */ +#undef HAVE_LIMITS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_LOCALE_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the `memset' function. */ +#undef HAVE_MEMSET + +/* Define to 1 if you have Pango-1.20 */ +#undef HAVE_PANGO_1_20 + +/* Define to 1 if you have the header file. */ +#undef HAVE_PTHREAD_H + +/* Define to 1 if you have the `setlocale' function. */ +#undef HAVE_SETLOCALE + +/* Define to 1 if `stat' has the bug that it succeeds when given the + zero-length file name argument. */ +#undef HAVE_STAT_EMPTY_STRING_BUG + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the `strftime' function. */ +#undef HAVE_STRFTIME + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the `strncasecmp' function. */ +#undef HAVE_STRNCASECMP + +/* Define to 1 if you have the `strstr' function. */ +#undef HAVE_STRSTR + +/* Define to 1 if you have the `strtol' function. */ +#undef HAVE_STRTOL + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TIME_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* HTML render type */ +#undef HTMLRENDER + +/* Define to 1 if `lstat' dereferences a symlink specified with a trailing + slash. */ +#undef LSTAT_FOLLOWS_SLASHED_SYMLINK + +/* Notes module enabled */ +#undef NOTES_ENABLED + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Defined if printing support is enabled */ +#undef PRINTING_SUPPORT + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Tasks module enabled */ +#undef TASKS_ENABLED + +/* Define to 1 if your declares `struct tm'. */ +#undef TM_IN_SYS_TIME + +/* Version number of package */ +#undef VERSION + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to `unsigned int' if does not define. */ +#undef size_t diff -Naur osmo-0.2.12-p1/config.sub osmo-0.2.12-p2/config.sub --- osmo-0.2.12-p1/config.sub 1970-01-01 08:00:00.000000000 +0800 +++ osmo-0.2.12-p2/config.sub 2022-01-16 19:43:39.143646241 +0800 @@ -0,0 +1,1793 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright 1992-2020 Free Software Foundation, Inc. + +timestamp='2020-01-01' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). + + +# Please send patches to . +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS + +Canonicalize a configuration name. + +Options: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright 1992-2020 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo "$1" + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Split fields of configuration type +# shellcheck disable=SC2162 +IFS="-" read field1 field2 field3 field4 <&2 + exit 1 + ;; + *-*-*-*) + basic_machine=$field1-$field2 + os=$field3-$field4 + ;; + *-*-*) + # Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two + # parts + maybe_os=$field2-$field3 + case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc \ + | linux-newlib* | linux-musl* | linux-uclibc* | uclinux-uclibc* \ + | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \ + | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \ + | storm-chaos* | os2-emx* | rtmk-nova*) + basic_machine=$field1 + os=$maybe_os + ;; + android-linux) + basic_machine=$field1-unknown + os=linux-android + ;; + *) + basic_machine=$field1-$field2 + os=$field3 + ;; + esac + ;; + *-*) + # A lone config we happen to match not fitting any pattern + case $field1-$field2 in + decstation-3100) + basic_machine=mips-dec + os= + ;; + *-*) + # Second component is usually, but not always the OS + case $field2 in + # Prevent following clause from handling this valid os + sun*os*) + basic_machine=$field1 + os=$field2 + ;; + # Manufacturers + dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \ + | att* | 7300* | 3300* | delta* | motorola* | sun[234]* \ + | unicom* | ibm* | next | hp | isi* | apollo | altos* \ + | convergent* | ncr* | news | 32* | 3600* | 3100* \ + | hitachi* | c[123]* | convex* | sun | crds | omron* | dg \ + | ultra | tti* | harris | dolphin | highlevel | gould \ + | cbm | ns | masscomp | apple | axis | knuth | cray \ + | microblaze* | sim | cisco \ + | oki | wec | wrs | winbond) + basic_machine=$field1-$field2 + os= + ;; + *) + basic_machine=$field1 + os=$field2 + ;; + esac + ;; + esac + ;; + *) + # Convert single-component short-hands not valid as part of + # multi-component configurations. + case $field1 in + 386bsd) + basic_machine=i386-pc + os=bsd + ;; + a29khif) + basic_machine=a29k-amd + os=udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=scout + ;; + alliant) + basic_machine=fx80-alliant + os= + ;; + altos | altos3068) + basic_machine=m68k-altos + os= + ;; + am29k) + basic_machine=a29k-none + os=bsd + ;; + amdahl) + basic_machine=580-amdahl + os=sysv + ;; + amiga) + basic_machine=m68k-unknown + os= + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=bsd + ;; + aros) + basic_machine=i386-pc + os=aros + ;; + aux) + basic_machine=m68k-apple + os=aux + ;; + balance) + basic_machine=ns32k-sequent + os=dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=linux + ;; + cegcc) + basic_machine=arm-unknown + os=cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=bsd + ;; + convex-c2) + basic_machine=c2-convex + os=bsd + ;; + convex-c32) + basic_machine=c32-convex + os=bsd + ;; + convex-c34) + basic_machine=c34-convex + os=bsd + ;; + convex-c38) + basic_machine=c38-convex + os=bsd + ;; + cray) + basic_machine=j90-cray + os=unicos + ;; + crds | unos) + basic_machine=m68k-crds + os= + ;; + da30) + basic_machine=m68k-da30 + os= + ;; + decstation | pmax | pmin | dec3100 | decstatn) + basic_machine=mips-dec + os= + ;; + delta88) + basic_machine=m88k-motorola + os=sysv3 + ;; + dicos) + basic_machine=i686-pc + os=dicos + ;; + djgpp) + basic_machine=i586-pc + os=msdosdjgpp + ;; + ebmon29k) + basic_machine=a29k-amd + os=ebmon + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=ose + ;; + gmicro) + basic_machine=tron-gmicro + os=sysv + ;; + go32) + basic_machine=i386-pc + os=go32 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=hms + ;; + harris) + basic_machine=m88k-harris + os=sysv3 + ;; + hp300 | hp300hpux) + basic_machine=m68k-hp + os=hpux + ;; + hp300bsd) + basic_machine=m68k-hp + os=bsd + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=proelf + ;; + i386mach) + basic_machine=i386-mach + os=mach + ;; + isi68 | isi) + basic_machine=m68k-isi + os=sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=linux + ;; + magnum | m3230) + basic_machine=mips-mips + os=sysv + ;; + merlin) + basic_machine=ns32k-utek + os=sysv + ;; + mingw64) + basic_machine=x86_64-pc + os=mingw64 + ;; + mingw32) + basic_machine=i686-pc + os=mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=mingw32ce + ;; + monitor) + basic_machine=m68k-rom68k + os=coff + ;; + morphos) + basic_machine=powerpc-unknown + os=morphos + ;; + moxiebox) + basic_machine=moxie-unknown + os=moxiebox + ;; + msdos) + basic_machine=i386-pc + os=msdos + ;; + msys) + basic_machine=i686-pc + os=msys + ;; + mvs) + basic_machine=i370-ibm + os=mvs + ;; + nacl) + basic_machine=le32-unknown + os=nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=sysv4 + ;; + netbsd386) + basic_machine=i386-pc + os=netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=newsos + ;; + news1000) + basic_machine=m68030-sony + os=newsos + ;; + necv70) + basic_machine=v70-nec + os=sysv + ;; + nh3000) + basic_machine=m68k-harris + os=cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=cxux + ;; + nindy960) + basic_machine=i960-intel + os=nindy + ;; + mon960) + basic_machine=i960-intel + os=mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=nonstopux + ;; + os400) + basic_machine=powerpc-ibm + os=os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=ose + ;; + os68k) + basic_machine=m68k-none + os=os68k + ;; + paragon) + basic_machine=i860-intel + os=osf + ;; + parisc) + basic_machine=hppa-unknown + os=linux + ;; + pw32) + basic_machine=i586-unknown + os=pw32 + ;; + rdos | rdos64) + basic_machine=x86_64-pc + os=rdos + ;; + rdos32) + basic_machine=i386-pc + os=rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=coff + ;; + sa29200) + basic_machine=a29k-amd + os=udi + ;; + sei) + basic_machine=mips-sei + os=seiux + ;; + sequent) + basic_machine=i386-sequent + os= + ;; + sps7) + basic_machine=m68k-bull + os=sysv2 + ;; + st2000) + basic_machine=m68k-tandem + os= + ;; + stratus) + basic_machine=i860-stratus + os=sysv4 + ;; + sun2) + basic_machine=m68000-sun + os= + ;; + sun2os3) + basic_machine=m68000-sun + os=sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=sunos4 + ;; + sun3) + basic_machine=m68k-sun + os= + ;; + sun3os3) + basic_machine=m68k-sun + os=sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=sunos4 + ;; + sun4) + basic_machine=sparc-sun + os= + ;; + sun4os3) + basic_machine=sparc-sun + os=sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=solaris2 + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + os= + ;; + sv1) + basic_machine=sv1-cray + os=unicos + ;; + symmetry) + basic_machine=i386-sequent + os=dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=unicos + ;; + t90) + basic_machine=t90-cray + os=unicos + ;; + toad1) + basic_machine=pdp10-xkl + os=tops20 + ;; + tpf) + basic_machine=s390x-ibm + os=tpf + ;; + udi29k) + basic_machine=a29k-amd + os=udi + ;; + ultra3) + basic_machine=a29k-nyu + os=sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=none + ;; + vaxv) + basic_machine=vax-dec + os=sysv + ;; + vms) + basic_machine=vax-dec + os=vms + ;; + vsta) + basic_machine=i386-pc + os=vsta + ;; + vxworks960) + basic_machine=i960-wrs + os=vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=vxworks + ;; + xbox) + basic_machine=i686-pc + os=mingw32 + ;; + ymp) + basic_machine=ymp-cray + os=unicos + ;; + *) + basic_machine=$1 + os= + ;; + esac + ;; +esac + +# Decode 1-component or ad-hoc basic machines +case $basic_machine in + # Here we handle the default manufacturer of certain CPU types. It is in + # some cases the only manufacturer, in others, it is the most popular. + w89k) + cpu=hppa1.1 + vendor=winbond + ;; + op50n) + cpu=hppa1.1 + vendor=oki + ;; + op60c) + cpu=hppa1.1 + vendor=oki + ;; + ibm*) + cpu=i370 + vendor=ibm + ;; + orion105) + cpu=clipper + vendor=highlevel + ;; + mac | mpw | mac-mpw) + cpu=m68k + vendor=apple + ;; + pmac | pmac-mpw) + cpu=powerpc + vendor=apple + ;; + + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + cpu=m68000 + vendor=att + ;; + 3b*) + cpu=we32k + vendor=att + ;; + bluegene*) + cpu=powerpc + vendor=ibm + os=cnk + ;; + decsystem10* | dec10*) + cpu=pdp10 + vendor=dec + os=tops10 + ;; + decsystem20* | dec20*) + cpu=pdp10 + vendor=dec + os=tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + cpu=m68k + vendor=motorola + ;; + dpx2*) + cpu=m68k + vendor=bull + os=sysv3 + ;; + encore | umax | mmax) + cpu=ns32k + vendor=encore + ;; + elxsi) + cpu=elxsi + vendor=elxsi + os=${os:-bsd} + ;; + fx2800) + cpu=i860 + vendor=alliant + ;; + genix) + cpu=ns32k + vendor=ns + ;; + h3050r* | hiux*) + cpu=hppa1.1 + vendor=hitachi + os=hiuxwe2 + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + cpu=hppa1.0 + vendor=hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + cpu=m68000 + vendor=hp + ;; + hp9k3[2-9][0-9]) + cpu=m68k + vendor=hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + cpu=hppa1.0 + vendor=hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + cpu=hppa1.1 + vendor=hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + cpu=hppa1.1 + vendor=hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + cpu=hppa1.1 + vendor=hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + cpu=hppa1.1 + vendor=hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + cpu=hppa1.0 + vendor=hp + ;; + i*86v32) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + os=sysv32 + ;; + i*86v4*) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + os=sysv4 + ;; + i*86v) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + os=sysv + ;; + i*86sol2) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + os=solaris2 + ;; + j90 | j90-cray) + cpu=j90 + vendor=cray + os=${os:-unicos} + ;; + iris | iris4d) + cpu=mips + vendor=sgi + case $os in + irix*) + ;; + *) + os=irix4 + ;; + esac + ;; + miniframe) + cpu=m68000 + vendor=convergent + ;; + *mint | mint[0-9]* | *MiNT | *MiNT[0-9]*) + cpu=m68k + vendor=atari + os=mint + ;; + news-3600 | risc-news) + cpu=mips + vendor=sony + os=newsos + ;; + next | m*-next) + cpu=m68k + vendor=next + case $os in + openstep*) + ;; + nextstep*) + ;; + ns2*) + os=nextstep2 + ;; + *) + os=nextstep3 + ;; + esac + ;; + np1) + cpu=np1 + vendor=gould + ;; + op50n-* | op60c-*) + cpu=hppa1.1 + vendor=oki + os=proelf + ;; + pa-hitachi) + cpu=hppa1.1 + vendor=hitachi + os=hiuxwe2 + ;; + pbd) + cpu=sparc + vendor=tti + ;; + pbb) + cpu=m68k + vendor=tti + ;; + pc532) + cpu=ns32k + vendor=pc532 + ;; + pn) + cpu=pn + vendor=gould + ;; + power) + cpu=power + vendor=ibm + ;; + ps2) + cpu=i386 + vendor=ibm + ;; + rm[46]00) + cpu=mips + vendor=siemens + ;; + rtpc | rtpc-*) + cpu=romp + vendor=ibm + ;; + sde) + cpu=mipsisa32 + vendor=sde + os=${os:-elf} + ;; + simso-wrs) + cpu=sparclite + vendor=wrs + os=vxworks + ;; + tower | tower-32) + cpu=m68k + vendor=ncr + ;; + vpp*|vx|vx-*) + cpu=f301 + vendor=fujitsu + ;; + w65) + cpu=w65 + vendor=wdc + ;; + w89k-*) + cpu=hppa1.1 + vendor=winbond + os=proelf + ;; + none) + cpu=none + vendor=none + ;; + leon|leon[3-9]) + cpu=sparc + vendor=$basic_machine + ;; + leon-*|leon[3-9]-*) + cpu=sparc + vendor=`echo "$basic_machine" | sed 's/-.*//'` + ;; + + *-*) + # shellcheck disable=SC2162 + IFS="-" read cpu vendor <&2 + exit 1 + ;; + esac + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $vendor in + digital*) + vendor=dec + ;; + commodore*) + vendor=cbm + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x$os != x ] +then +case $os in + # First match some system type aliases that might get confused + # with valid system types. + # solaris* is a basic system type, with this one exception. + auroraux) + os=auroraux + ;; + bluegene*) + os=cnk + ;; + solaris1 | solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + solaris) + os=solaris2 + ;; + unixware*) + os=sysv4.2uw + ;; + gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # es1800 is here to avoid being matched by es* (a different OS) + es1800*) + os=ose + ;; + # Some version numbers need modification + chorusos*) + os=chorusos + ;; + isc) + os=isc2.2 + ;; + sco6) + os=sco5v6 + ;; + sco5) + os=sco3.2v5 + ;; + sco4) + os=sco3.2v4 + ;; + sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + ;; + sco3.2v[4-9]* | sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + ;; + scout) + # Don't match below + ;; + sco*) + os=sco3.2v2 + ;; + psos*) + os=psos + ;; + # Now accept the basic system types. + # The portable systems comes first. + # Each alternative MUST end in a * to match a version number. + # sysv* is not here because it comes later, after sysvr4. + gnu* | bsd* | mach* | minix* | genix* | ultrix* | irix* \ + | *vms* | esix* | aix* | cnk* | sunos | sunos[34]*\ + | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \ + | sym* | kopensolaris* | plan9* \ + | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \ + | aos* | aros* | cloudabi* | sortix* | twizzler* \ + | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \ + | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \ + | knetbsd* | mirbsd* | netbsd* \ + | bitrig* | openbsd* | solidbsd* | libertybsd* | os108* \ + | ekkobsd* | kfreebsd* | freebsd* | riscix* | lynxos* \ + | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \ + | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \ + | udi* | eabi* | lites* | ieee* | go32* | aux* | hcos* \ + | chorusrdb* | cegcc* | glidix* \ + | cygwin* | msys* | pe* | moss* | proelf* | rtems* \ + | midipix* | mingw32* | mingw64* | linux-gnu* | linux-android* \ + | linux-newlib* | linux-musl* | linux-uclibc* \ + | uxpv* | beos* | mpeix* | udk* | moxiebox* \ + | interix* | uwin* | mks* | rhapsody* | darwin* \ + | openstep* | oskit* | conix* | pw32* | nonstopux* \ + | storm-chaos* | tops10* | tenex* | tops20* | its* \ + | os2* | vos* | palmos* | uclinux* | nucleus* \ + | morphos* | superux* | rtmk* | windiss* \ + | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \ + | skyos* | haiku* | rdos* | toppers* | drops* | es* \ + | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \ + | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi* \ + | nsk* | powerunix) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + qnx*) + case $cpu in + x86 | i*86) + ;; + *) + os=nto-$os + ;; + esac + ;; + hiux*) + os=hiuxwe2 + ;; + nto-qnx*) + ;; + nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + sim | xray | os68k* | v88r* \ + | windows* | osx | abug | netware* | os9* \ + | macos* | mpw* | magic* | mmixware* | mon960* | lnews*) + ;; + linux-dietlibc) + os=linux-dietlibc + ;; + linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + lynx*178) + os=lynxos178 + ;; + lynx*5) + os=lynxos5 + ;; + lynx*) + os=lynxos + ;; + mac*) + os=`echo "$os" | sed -e 's|mac|macos|'` + ;; + opened*) + os=openedition + ;; + os400*) + os=os400 + ;; + sunos5*) + os=`echo "$os" | sed -e 's|sunos5|solaris2|'` + ;; + sunos6*) + os=`echo "$os" | sed -e 's|sunos6|solaris3|'` + ;; + wince*) + os=wince + ;; + utek*) + os=bsd + ;; + dynix*) + os=bsd + ;; + acis*) + os=aos + ;; + atheos*) + os=atheos + ;; + syllable*) + os=syllable + ;; + 386bsd) + os=bsd + ;; + ctix* | uts*) + os=sysv + ;; + nova*) + os=rtmk-nova + ;; + ns2) + os=nextstep2 + ;; + # Preserve the version number of sinix5. + sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + sinix*) + os=sysv4 + ;; + tpf*) + os=tpf + ;; + triton*) + os=sysv3 + ;; + oss*) + os=sysv3 + ;; + svr4*) + os=sysv4 + ;; + svr3) + os=sysv3 + ;; + sysvr4) + os=sysv4 + ;; + # This must come after sysvr4. + sysv*) + ;; + ose*) + os=ose + ;; + *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) + os=mint + ;; + zvmoe) + os=zvmoe + ;; + dicos*) + os=dicos + ;; + pikeos*) + # Until real need of OS specific support for + # particular features comes up, bare metal + # configurations are quite functional. + case $cpu in + arm*) + os=eabi + ;; + *) + os=elf + ;; + esac + ;; + nacl*) + ;; + ios) + ;; + none) + ;; + *-eabi) + ;; + *) + echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $cpu-$vendor in + score-*) + os=elf + ;; + spu-*) + os=elf + ;; + *-acorn) + os=riscix1.2 + ;; + arm*-rebel) + os=linux + ;; + arm*-semi) + os=aout + ;; + c4x-* | tic4x-*) + os=coff + ;; + c8051-*) + os=elf + ;; + clipper-intergraph) + os=clix + ;; + hexagon-*) + os=elf + ;; + tic54x-*) + os=coff + ;; + tic55x-*) + os=coff + ;; + tic6x-*) + os=coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=tops20 + ;; + pdp11-*) + os=none + ;; + *-dec | vax-*) + os=ultrix4.2 + ;; + m68*-apollo) + os=domain + ;; + i386-sun) + os=sunos4.0.2 + ;; + m68000-sun) + os=sunos3 + ;; + m68*-cisco) + os=aout + ;; + mep-*) + os=elf + ;; + mips*-cisco) + os=elf + ;; + mips*-*) + os=elf + ;; + or32-*) + os=coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=sysv3 + ;; + sparc-* | *-sun) + os=sunos4.1.1 + ;; + pru-*) + os=elf + ;; + *-be) + os=beos + ;; + *-ibm) + os=aix + ;; + *-knuth) + os=mmixware + ;; + *-wec) + os=proelf + ;; + *-winbond) + os=proelf + ;; + *-oki) + os=proelf + ;; + *-hp) + os=hpux + ;; + *-hitachi) + os=hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=sysv + ;; + *-cbm) + os=amigaos + ;; + *-dg) + os=dgux + ;; + *-dolphin) + os=sysv3 + ;; + m68k-ccur) + os=rtu + ;; + m88k-omron*) + os=luna + ;; + *-next) + os=nextstep + ;; + *-sequent) + os=ptx + ;; + *-crds) + os=unos + ;; + *-ns) + os=genix + ;; + i370-*) + os=mvs + ;; + *-gould) + os=sysv + ;; + *-highlevel) + os=bsd + ;; + *-encore) + os=bsd + ;; + *-sgi) + os=irix + ;; + *-siemens) + os=sysv4 + ;; + *-masscomp) + os=rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=uxpv + ;; + *-rom68k) + os=coff + ;; + *-*bug) + os=coff + ;; + *-apple) + os=macos + ;; + *-atari*) + os=mint + ;; + *-wrs) + os=vxworks + ;; + *) + os=none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +case $vendor in + unknown) + case $os in + riscix*) + vendor=acorn + ;; + sunos*) + vendor=sun + ;; + cnk*|-aix*) + vendor=ibm + ;; + beos*) + vendor=be + ;; + hpux*) + vendor=hp + ;; + mpeix*) + vendor=hp + ;; + hiux*) + vendor=hitachi + ;; + unos*) + vendor=crds + ;; + dgux*) + vendor=dg + ;; + luna*) + vendor=omron + ;; + genix*) + vendor=ns + ;; + clix*) + vendor=intergraph + ;; + mvs* | opened*) + vendor=ibm + ;; + os400*) + vendor=ibm + ;; + ptx*) + vendor=sequent + ;; + tpf*) + vendor=ibm + ;; + vxsim* | vxworks* | windiss*) + vendor=wrs + ;; + aux*) + vendor=apple + ;; + hms*) + vendor=hitachi + ;; + mpw* | macos*) + vendor=apple + ;; + *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) + vendor=atari + ;; + vos*) + vendor=stratus + ;; + esac + ;; +esac + +echo "$cpu-$vendor-$os" +exit + +# Local variables: +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff -Naur osmo-0.2.12-p1/configure osmo-0.2.12-p2/configure --- osmo-0.2.12-p1/configure 2022-01-16 19:38:24.993637154 +0800 +++ osmo-0.2.12-p2/configure 2022-01-16 19:43:38.286979551 +0800 @@ -648,7 +648,6 @@ AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE -am__quote am__include DEPDIR OBJEXT @@ -659,6 +658,10 @@ CFLAGS CC PKG_CONFIG +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V am__untar am__tar AMTAR @@ -719,10 +722,12 @@ PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR -SHELL' +SHELL +am__quote' ac_subst_files='' ac_user_opts=' enable_option_checking +enable_silent_rules with_contacts with_tasks with_notes @@ -1377,8 +1382,12 @@ --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build --disable-gtktest do not try to compile and run a test GTK+ program --disable-xmltest Do not try to compile and run a test LIBXML program --enable-debug=yes,no compile with debugging support (default: no) @@ -2270,7 +2279,7 @@ -am__api_version='1.11' +am__api_version='1.16' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do @@ -2396,9 +2405,6 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' @@ -2409,43 +2415,12 @@ esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } + test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. @@ -2456,8 +2431,8 @@ ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in @@ -2468,15 +2443,15 @@ esac fi # Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " else am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -2485,10 +2460,10 @@ esac fi -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. +# will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. @@ -2627,12 +2602,6 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. @@ -2715,6 +2684,45 @@ fi rmdir .tst 2>/dev/null +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." @@ -2765,12 +2773,22 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' + am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' @@ -2778,6 +2796,49 @@ +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + ac_config_headers="$ac_config_headers config.h" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for type of build" >&5 @@ -3723,49 +3784,108 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" - -am_make=${MAKE-make} -cat > confinc << 'END' +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 +$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; } +cat > confinc.mk << 'END' am__doit: - @echo this is the am__doit target + @echo this is the am__doit target >confinc.out .PHONY: am__doit END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 + (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + case $?:`cat confinc.out 2>/dev/null` in #( + '0:this is the am__doit target') : + case $s in #( + BSD) : + am__include='.include' am__quote='"' ;; #( + *) : + am__include='include' am__quote='' ;; +esac ;; #( + *) : ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf +esac + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 +$as_echo "${_am_result}" >&6; } # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : @@ -3798,8 +3918,8 @@ # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're @@ -3834,16 +3954,16 @@ : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - # We check with `-c' and `-o' for the sake of the "dashmstdout" + # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in @@ -3852,8 +3972,8 @@ test "$am__universal" = false || continue ;; nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else @@ -3861,7 +3981,7 @@ fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has + # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} @@ -6894,7 +7014,7 @@ # # INIT-COMMANDS # -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}" _ACEOF @@ -7515,32 +7635,38 @@ case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files + # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + case $CONFIG_FILES in #( + *\'*) : + eval set x "$CONFIG_FILES" ;; #( + *) : + set x $CONFIG_FILES ;; #( + *) : + ;; +esac shift - for mf + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf do # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line + am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`$as_dirname -- "$am_mf" || +$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$am_mf" : 'X\(//\)[^/]' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$am_mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -7558,55 +7684,48 @@ q } s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ + am_filepart=`$as_basename -- "$am_mf" || +$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$am_mf" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } - /^X\(\/\/\)$/{ + /^X\/\(\/\/\)$/{ s//\1/ q } - /^X\(\/\).*/{ + /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done + { echo "$as_me:$LINENO: cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles" >&5 + (cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } || am_rc=$? done + if test $am_rc -ne 0; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking). +See \`config.log' for more details" "$LINENO" 5; } + fi + { am_dirpart=; unset am_dirpart;} + { am_filepart=; unset am_filepart;} + { am_mf=; unset am_mf;} + { am_rc=; unset am_rc;} + rm -f conftest-deps.mk } ;; diff -Naur osmo-0.2.12-p1/data/icons/16x16/Makefile.in osmo-0.2.12-p2/data/icons/16x16/Makefile.in --- osmo-0.2.12-p1/data/icons/16x16/Makefile.in 2022-01-16 19:38:24.396970471 +0800 +++ osmo-0.2.12-p2/data/icons/16x16/Makefile.in 2022-01-16 19:43:38.830312900 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,23 +15,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -50,17 +87,29 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = data/icons/16x16 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ @@ -97,9 +146,12 @@ } am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -132,6 +184,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -228,14 +282,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/16x16/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/icons/16x16/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -267,14 +320,17 @@ @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(iconsdir)'; $(am__uninstall_files_from_dir) -tags: TAGS -TAGS: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: -ctags: CTAGS -CTAGS: +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am -distdir: $(DISTFILES) +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -409,16 +465,19 @@ .MAKE: install-am install-strip -.PHONY: all all-am check check-am clean clean-generic distclean \ - distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-iconsDATA install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ - uninstall-am uninstall-iconsDATA +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-iconsDATA \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-iconsDATA + +.PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Naur osmo-0.2.12-p1/data/icons/22x22/Makefile.in osmo-0.2.12-p2/data/icons/22x22/Makefile.in --- osmo-0.2.12-p1/data/icons/22x22/Makefile.in 2022-01-16 19:38:24.400303803 +0800 +++ osmo-0.2.12-p2/data/icons/22x22/Makefile.in 2022-01-16 19:43:38.843646233 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,23 +15,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -50,17 +87,29 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = data/icons/22x22 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ @@ -97,9 +146,12 @@ } am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -132,6 +184,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -228,14 +282,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/22x22/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/icons/22x22/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -267,14 +320,17 @@ @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(iconsdir)'; $(am__uninstall_files_from_dir) -tags: TAGS -TAGS: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: -ctags: CTAGS -CTAGS: +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am -distdir: $(DISTFILES) +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -409,16 +465,19 @@ .MAKE: install-am install-strip -.PHONY: all all-am check check-am clean clean-generic distclean \ - distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-iconsDATA install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ - uninstall-am uninstall-iconsDATA +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-iconsDATA \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-iconsDATA + +.PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Naur osmo-0.2.12-p1/data/icons/24x24/Makefile.in osmo-0.2.12-p2/data/icons/24x24/Makefile.in --- osmo-0.2.12-p1/data/icons/24x24/Makefile.in 2022-01-16 19:38:24.400303803 +0800 +++ osmo-0.2.12-p2/data/icons/24x24/Makefile.in 2022-01-16 19:43:38.856979566 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,23 +15,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -50,17 +87,29 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = data/icons/24x24 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ @@ -97,9 +146,12 @@ } am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -132,6 +184,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -228,14 +282,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/24x24/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/icons/24x24/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -267,14 +320,17 @@ @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(iconsdir)'; $(am__uninstall_files_from_dir) -tags: TAGS -TAGS: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: -ctags: CTAGS -CTAGS: +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am -distdir: $(DISTFILES) +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -409,16 +465,19 @@ .MAKE: install-am install-strip -.PHONY: all all-am check check-am clean clean-generic distclean \ - distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-iconsDATA install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ - uninstall-am uninstall-iconsDATA +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-iconsDATA \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-iconsDATA + +.PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Naur osmo-0.2.12-p1/data/icons/32x32/Makefile.in osmo-0.2.12-p2/data/icons/32x32/Makefile.in --- osmo-0.2.12-p1/data/icons/32x32/Makefile.in 2022-01-16 19:38:24.396970471 +0800 +++ osmo-0.2.12-p2/data/icons/32x32/Makefile.in 2022-01-16 19:43:38.866979567 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,23 +15,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -50,17 +87,29 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = data/icons/32x32 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ @@ -97,9 +146,12 @@ } am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -132,6 +184,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -228,14 +282,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/32x32/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/icons/32x32/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -267,14 +320,17 @@ @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(iconsdir)'; $(am__uninstall_files_from_dir) -tags: TAGS -TAGS: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: -ctags: CTAGS -CTAGS: +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am -distdir: $(DISTFILES) +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -409,16 +465,19 @@ .MAKE: install-am install-strip -.PHONY: all all-am check check-am clean clean-generic distclean \ - distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-iconsDATA install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ - uninstall-am uninstall-iconsDATA +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-iconsDATA \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-iconsDATA + +.PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Naur osmo-0.2.12-p1/data/icons/48x48/Makefile.in osmo-0.2.12-p2/data/icons/48x48/Makefile.in --- osmo-0.2.12-p1/data/icons/48x48/Makefile.in 2022-01-16 19:38:24.393637137 +0800 +++ osmo-0.2.12-p2/data/icons/48x48/Makefile.in 2022-01-16 19:43:38.880312901 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,23 +15,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -50,17 +87,29 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = data/icons/48x48 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ @@ -97,9 +146,12 @@ } am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -132,6 +184,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -228,14 +282,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/48x48/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/icons/48x48/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -267,14 +320,17 @@ @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(iconsdir)'; $(am__uninstall_files_from_dir) -tags: TAGS -TAGS: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: -ctags: CTAGS -CTAGS: +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am -distdir: $(DISTFILES) +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -409,16 +465,19 @@ .MAKE: install-am install-strip -.PHONY: all all-am check check-am clean clean-generic distclean \ - distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-iconsDATA install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ - uninstall-am uninstall-iconsDATA +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-iconsDATA \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-iconsDATA + +.PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Naur osmo-0.2.12-p1/data/icons/Makefile.in osmo-0.2.12-p2/data/icons/Makefile.in --- osmo-0.2.12-p1/data/icons/Makefile.in 2022-01-16 19:38:24.396970471 +0800 +++ osmo-0.2.12-p2/data/icons/Makefile.in 2022-01-16 19:43:38.893646235 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -15,23 +14,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ esac; \ - test $$am__dry = yes; \ - } + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -49,26 +86,39 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = data/icons -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ @@ -76,12 +126,33 @@ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + distdir distdir-am +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -110,6 +181,7 @@ reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -142,6 +214,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -234,14 +308,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/icons/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -254,22 +327,25 @@ $(am__aclocal_m4_deps): # This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -284,57 +360,12 @@ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ @@ -350,12 +381,7 @@ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ + $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ @@ -367,15 +393,11 @@ $$unique; \ fi; \ fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique @@ -384,11 +406,29 @@ here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -distdir: $(DISTFILES) +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -546,23 +586,23 @@ uninstall-am: @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) uninstall-hook -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-data-am install-strip tags-recursive \ - uninstall-am - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic ctags \ - ctags-recursive distclean distclean-generic distclean-tags \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-data install-data-am install-data-hook \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ - pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ - uninstall-hook +.MAKE: $(am__recursive_targets) install-am install-data-am \ + install-strip uninstall-am + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ + check-am clean clean-generic cscopelist-am ctags ctags-am \ + distclean distclean-generic distclean-tags distdir dvi dvi-am \ + html html-am info info-am install install-am install-data \ + install-data-am install-data-hook install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs installdirs-am \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-hook + +.PRECIOUS: Makefile install-data-hook: update-icon-cache diff -Naur osmo-0.2.12-p1/data/icons/scalable/Makefile.in osmo-0.2.12-p2/data/icons/scalable/Makefile.in --- osmo-0.2.12-p1/data/icons/scalable/Makefile.in 2022-01-16 19:38:24.393637137 +0800 +++ osmo-0.2.12-p2/data/icons/scalable/Makefile.in 2022-01-16 19:43:38.906979568 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,23 +15,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -50,17 +87,29 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = data/icons/scalable -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ @@ -97,9 +146,12 @@ } am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -132,6 +184,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -228,14 +282,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/scalable/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/icons/scalable/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -267,14 +320,17 @@ @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(iconsdir)'; $(am__uninstall_files_from_dir) -tags: TAGS -TAGS: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: -ctags: CTAGS -CTAGS: +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am -distdir: $(DISTFILES) +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -409,16 +465,19 @@ .MAKE: install-am install-strip -.PHONY: all all-am check check-am clean clean-generic distclean \ - distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-iconsDATA install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ - uninstall-am uninstall-iconsDATA +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-iconsDATA \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-iconsDATA + +.PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Naur osmo-0.2.12-p1/data/Makefile.in osmo-0.2.12-p2/data/Makefile.in --- osmo-0.2.12-p1/data/Makefile.in 2022-01-16 19:38:24.403637138 +0800 +++ osmo-0.2.12-p2/data/Makefile.in 2022-01-16 19:43:38.816979566 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,23 +15,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -50,26 +87,39 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = data -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ @@ -110,12 +160,33 @@ DATA = $(applications_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + distdir distdir-am +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -144,6 +215,7 @@ reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -176,6 +248,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -271,14 +345,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -355,22 +428,25 @@ dir='$(DESTDIR)$(applicationsdir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -385,57 +461,12 @@ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ @@ -451,12 +482,7 @@ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ + $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ @@ -468,15 +494,11 @@ $$unique; \ fi; \ fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique @@ -485,24 +507,29 @@ here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -distdir: $(DISTFILES) - @list='$(MANS)'; if test -n "$$list"; then \ - list=`for p in $$list; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ - if test -n "$$list" && \ - grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ - echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ - grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ - echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ - echo " typically \`make maintainer-clean' will remove them" >&2; \ - exit 1; \ - else :; fi; \ - else :; fi +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -665,25 +692,25 @@ $(MAKE) $(AM_MAKEFLAGS) uninstall-hook uninstall-man: uninstall-man1 -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-data-am install-strip tags-recursive \ - uninstall-am - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic ctags \ - ctags-recursive distclean distclean-generic distclean-tags \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-applicationsDATA install-data \ - install-data-am install-data-hook install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-man1 \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ - tags-recursive uninstall uninstall-am \ - uninstall-applicationsDATA uninstall-hook uninstall-man \ - uninstall-man1 +.MAKE: $(am__recursive_targets) install-am install-data-am \ + install-strip uninstall-am + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ + check-am clean clean-generic cscopelist-am ctags ctags-am \ + distclean distclean-generic distclean-tags distdir dvi dvi-am \ + html html-am info info-am install install-am \ + install-applicationsDATA install-data install-data-am \ + install-data-hook install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-man1 install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs installdirs-am \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-applicationsDATA uninstall-hook \ + uninstall-man uninstall-man1 + +.PRECIOUS: Makefile install-data-hook: diff -Naur osmo-0.2.12-p1/data/pixmaps/Makefile.in osmo-0.2.12-p2/data/pixmaps/Makefile.in --- osmo-0.2.12-p1/data/pixmaps/Makefile.in 2022-01-16 19:38:24.400303803 +0800 +++ osmo-0.2.12-p2/data/pixmaps/Makefile.in 2022-01-16 19:43:38.920312902 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,23 +15,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -50,17 +87,29 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = data/pixmaps -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ @@ -97,9 +146,12 @@ } am__installdirs = "$(DESTDIR)$(pixmapdir)" DATA = $(pixmap_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -132,6 +184,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -225,14 +279,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/pixmaps/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/pixmaps/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -264,14 +317,17 @@ @list='$(pixmap_DATA)'; test -n "$(pixmapdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(pixmapdir)'; $(am__uninstall_files_from_dir) -tags: TAGS -TAGS: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: -ctags: CTAGS -CTAGS: +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am -distdir: $(DISTFILES) +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -406,16 +462,19 @@ .MAKE: install-am install-strip -.PHONY: all all-am check check-am clean clean-generic distclean \ - distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-pixmapDATA install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ - uninstall-am uninstall-pixmapDATA +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-pixmapDATA install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-pixmapDATA + +.PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Naur osmo-0.2.12-p1/data/sounds/Makefile.in osmo-0.2.12-p2/data/sounds/Makefile.in --- osmo-0.2.12-p1/data/sounds/Makefile.in 2022-01-16 19:38:24.403637138 +0800 +++ osmo-0.2.12-p2/data/sounds/Makefile.in 2022-01-16 19:43:38.933646235 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,23 +15,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -50,17 +87,29 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = data/sounds -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ @@ -97,9 +146,12 @@ } am__installdirs = "$(DESTDIR)$(soundsdir)" DATA = $(sounds_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -132,6 +184,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -225,14 +279,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/sounds/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign data/sounds/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -264,14 +317,17 @@ @list='$(sounds_DATA)'; test -n "$(soundsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(soundsdir)'; $(am__uninstall_files_from_dir) -tags: TAGS -TAGS: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: -ctags: CTAGS -CTAGS: +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am -distdir: $(DISTFILES) +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -406,16 +462,19 @@ .MAKE: install-am install-strip -.PHONY: all all-am check check-am clean clean-generic distclean \ - distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-soundsDATA install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ - uninstall-am uninstall-soundsDATA +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-soundsDATA install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-soundsDATA + +.PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Naur osmo-0.2.12-p1/Makefile.in osmo-0.2.12-p2/Makefile.in --- osmo-0.2.12-p1/Makefile.in 2022-01-16 19:38:24.403637138 +0800 +++ osmo-0.2.12-p2/Makefile.in 2022-01-16 19:43:38.800312898 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -15,23 +14,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ esac; \ - test $$am__dry = yes; \ - } + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -49,31 +86,42 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = . -DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(top_srcdir)/configure AUTHORS COPYING ChangeLog depcomp \ - install-sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ @@ -81,12 +129,36 @@ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir dist dist-all distcheck +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + cscope distdir distdir-am dist dist-all distcheck +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)config.h.in +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags +CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \ + COPYING ChangeLog README compile depcomp install-sh missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) @@ -96,6 +168,7 @@ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi +am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ @@ -123,12 +196,14 @@ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best +DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -161,6 +236,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -258,15 +335,14 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -279,8 +355,8 @@ $(am__aclocal_m4_deps): config.h: stamp-h1 - @if test ! -f $@; then rm -f stamp-h1; else :; fi - @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi + @test -f $@ || rm -f stamp-h1 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 @@ -294,22 +370,25 @@ -rm -f config.h stamp-h1 # This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -324,57 +403,12 @@ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ @@ -390,12 +424,7 @@ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ + $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ @@ -407,15 +436,11 @@ $$unique; \ fi; \ fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique @@ -424,11 +449,36 @@ here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files -distdir: $(DISTFILES) +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ @@ -493,41 +543,43 @@ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) + tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz + $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__remove_distdir) + $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__remove_distdir) - -dist-lzma: distdir - tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma - $(am__remove_distdir) + $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__remove_distdir) + $(am__post_remove_distdir) dist-tarZ: distdir + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) + $(am__post_remove_distdir) dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz + $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) + $(am__post_remove_distdir) -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another @@ -535,11 +587,9 @@ distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ - lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ @@ -547,22 +597,23 @@ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac - chmod -R a-w $(distdir); chmod u+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + && $(am__cd) $(distdir)/_build/sub \ + && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ @@ -585,7 +636,7 @@ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 - $(am__remove_distdir) + $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' @@ -719,13 +770,12 @@ uninstall-am: -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ - ctags-recursive install-am install-strip tags-recursive +.MAKE: $(am__recursive_targets) all install-am install-strip -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am am--refresh check check-am clean clean-generic \ - ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ - dist-lzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ + am--refresh check check-am clean clean-cscope clean-generic \ + cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ + dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ distcheck distclean distclean-generic distclean-hdr \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ @@ -735,8 +785,10 @@ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am + mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am + +.PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Naur osmo-0.2.12-p1/po/Makefile.in osmo-0.2.12-p2/po/Makefile.in --- osmo-0.2.12-p1/po/Makefile.in 2022-01-16 19:38:24.393637137 +0800 +++ osmo-0.2.12-p2/po/Makefile.in 2022-01-16 19:43:38.943646236 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -15,23 +14,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ esac; \ - test $$am__dry = yes; \ - } + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -49,17 +86,29 @@ PRE_UNINSTALL = : POST_UNINSTALL = : subdir = po -DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ @@ -67,9 +116,12 @@ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in README DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -102,6 +154,8 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ @@ -205,14 +259,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign po/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign po/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -223,14 +276,17 @@ $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): -tags: TAGS -TAGS: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: -ctags: CTAGS -CTAGS: +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am -distdir: $(DISTFILES) +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -363,15 +419,18 @@ .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-local \ - distclean distclean-generic distdir dvi dvi-am html html-am \ - info info-am install install-am install-data install-data-am \ - install-data-local install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ - pdf-am ps ps-am uninstall uninstall-am uninstall-local + cscopelist-am ctags-am distclean distclean-generic distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-data-local install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \ + uninstall-am uninstall-local + +.PRECIOUS: Makefile all: $(MOFILES) diff -Naur osmo-0.2.12-p1/src/Makefile.in osmo-0.2.12-p2/src/Makefile.in --- osmo-0.2.12-p1/src/Makefile.in 2022-01-16 19:38:24.406970470 +0800 +++ osmo-0.2.12-p2/src/Makefile.in 2022-01-16 19:43:38.966979570 +0800 @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,23 +15,61 @@ @SET_MAKE@ VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ esac; \ - test $$am__dry = yes; \ - } + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -50,22 +87,24 @@ PRE_UNINSTALL = : POST_UNINSTALL = : bin_PROGRAMS = osmo$(EXEEXT) -@HAVE_LIBWEBKIT_TRUE@am__append_1 = @LIBWEBKIT_CFLAGS@ -@HAVE_LIBWEBKIT_TRUE@am__append_2 = @LIBWEBKIT_LIBS@ -@HAVE_LIBICAL_TRUE@am__append_3 = @LIBICAL_CFLAGS@ -@HAVE_LIBICAL_TRUE@am__append_4 = @LIBICAL_LIBS@ -@HAVE_GTKSPELL_TRUE@am__append_5 = @GTKSPELL_CFLAGS@ -@HAVE_GTKSPELL_TRUE@am__append_6 = @GTKSPELL_LIBS@ -@CONFIGPATH_TRUE@am__append_7 = -DCONFIG_PATH=\"$(configpath)\" -@CONFIGDIR_TRUE@am__append_8 = -DCONFIG_DIR=\"$(configdir)\" +@HAVE_LIBGTKHTML_TRUE@am__append_1 = @LIBGTKHTML_CFLAGS@ +@HAVE_LIBGTKHTML_TRUE@am__append_2 = @LIBGTKHTML_LIBS@ +@HAVE_LIBWEBKIT_TRUE@am__append_3 = @LIBWEBKIT_CFLAGS@ +@HAVE_LIBWEBKIT_TRUE@am__append_4 = @LIBWEBKIT_LIBS@ +@HAVE_LIBICAL_TRUE@am__append_5 = @LIBICAL_CFLAGS@ +@HAVE_LIBICAL_TRUE@am__append_6 = @LIBICAL_LIBS@ +@HAVE_GTKSPELL_TRUE@am__append_7 = @GTKSPELL_CFLAGS@ +@HAVE_GTKSPELL_TRUE@am__append_8 = @GTKSPELL_LIBS@ +@CONFIGPATH_TRUE@am__append_9 = -DCONFIG_PATH=\"$(configpath)\" +@CONFIGDIR_TRUE@am__append_10 = -DCONFIG_DIR=\"$(configdir)\" subdir = src -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-2.0.m4 \ $(top_srcdir)/m4/libxml2.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -93,14 +132,59 @@ utils_time.$(OBJEXT) osmo_OBJECTS = $(am_osmo_OBJECTS) osmo_DEPENDENCIES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles +am__maybe_remake_depfiles = depfiles +am__depfiles_remade = ./$(DEPDIR)/about.Po ./$(DEPDIR)/backup.Po \ + ./$(DEPDIR)/calendar.Po ./$(DEPDIR)/calendar_calc.Po \ + ./$(DEPDIR)/calendar_fullyear.Po ./$(DEPDIR)/calendar_ical.Po \ + ./$(DEPDIR)/calendar_jumpto.Po ./$(DEPDIR)/calendar_notes.Po \ + ./$(DEPDIR)/calendar_preferences_gui.Po \ + ./$(DEPDIR)/calendar_print.Po ./$(DEPDIR)/calendar_timeline.Po \ + ./$(DEPDIR)/calendar_utils.Po ./$(DEPDIR)/calendar_widget.Po \ + ./$(DEPDIR)/check_events.Po ./$(DEPDIR)/contacts.Po \ + ./$(DEPDIR)/contacts_birthdays.Po \ + ./$(DEPDIR)/contacts_export.Po ./$(DEPDIR)/contacts_import.Po \ + ./$(DEPDIR)/contacts_import_csv.Po \ + ./$(DEPDIR)/contacts_items.Po \ + ./$(DEPDIR)/contacts_preferences_gui.Po \ + ./$(DEPDIR)/gtksourceiter.Po ./$(DEPDIR)/gui.Po \ + ./$(DEPDIR)/main.Po ./$(DEPDIR)/notes.Po \ + ./$(DEPDIR)/notes_items.Po \ + ./$(DEPDIR)/notes_preferences_gui.Po \ + ./$(DEPDIR)/options_prefs.Po ./$(DEPDIR)/preferences_gui.Po \ + ./$(DEPDIR)/stock_icons.Po ./$(DEPDIR)/tasks.Po \ + ./$(DEPDIR)/tasks_export.Po ./$(DEPDIR)/tasks_items.Po \ + ./$(DEPDIR)/tasks_preferences_gui.Po \ + ./$(DEPDIR)/tasks_print.Po ./$(DEPDIR)/tasks_utils.Po \ + ./$(DEPDIR)/utils.Po ./$(DEPDIR)/utils_date.Po \ + ./$(DEPDIR)/utils_date_time.Po ./$(DEPDIR)/utils_gui.Po \ + ./$(DEPDIR)/utils_time.Po am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = SOURCES = $(osmo_SOURCES) DIST_SOURCES = $(osmo_SOURCES) am__can_run_installinfo = \ @@ -108,11 +192,30 @@ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags +am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -145,13 +248,15 @@ LDFLAGS = @LDFLAGS@ LIBARCHIVE_CFLAGS = @LIBARCHIVE_CFLAGS@ LIBARCHIVE_LIBS = @LIBARCHIVE_LIBS@ +LIBGTKHTML_CFLAGS = @LIBGTKHTML_CFLAGS@ +LIBGTKHTML_LIBS = @LIBGTKHTML_LIBS@ LIBICAL_CFLAGS = @LIBICAL_CFLAGS@ LIBICAL_LIBS = @LIBICAL_LIBS@ LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@ LIBNOTIFY_LIBS = @LIBNOTIFY_LIBS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ @LIBNOTIFY_LIBS@ $(am__append_2) $(am__append_4) \ - $(am__append_6) + $(am__append_6) $(am__append_8) LIBWEBKIT_CFLAGS = @LIBWEBKIT_CFLAGS@ LIBWEBKIT_LIBS = @LIBWEBKIT_LIBS@ LTLIBOBJS = @LTLIBOBJS@ @@ -232,7 +337,7 @@ AM_CFLAGS = @CFLAGS@ @LIBNOTIFY_CFLAGS@ $(am__append_1) \ $(am__append_3) $(am__append_5) $(am__append_7) \ - $(am__append_8) + $(am__append_9) $(am__append_10) osmo_SOURCES = about.c about.h \ backup.c backup.h \ calendar.c calendar.h \ @@ -295,14 +400,13 @@ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign src/Makefile -.PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -322,10 +426,11 @@ fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p; \ - then echo "$$p"; echo "$$p"; else :; fi; \ + while read p p1; do if test -f $$p \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ done | \ - sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ @@ -346,16 +451,18 @@ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' `; \ + -e 's/$$/$(EXEEXT)/' \ + `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + osmo$(EXEEXT): $(osmo_OBJECTS) $(osmo_DEPENDENCIES) $(EXTRA_osmo_DEPENDENCIES) @rm -f osmo$(EXEEXT) - $(LINK) $(osmo_OBJECTS) $(osmo_LDADD) $(LIBS) + $(AM_V_CCLD)$(LINK) $(osmo_OBJECTS) $(osmo_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) @@ -363,82 +470,77 @@ distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/about.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/backup.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_calc.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_fullyear.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_ical.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_jumpto.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_notes.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_preferences_gui.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_print.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_timeline.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_utils.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_widget.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/check_events.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_birthdays.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_export.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_import.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_import_csv.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_items.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_preferences_gui.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtksourceiter.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gui.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/notes.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/notes_items.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/notes_preferences_gui.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/options_prefs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/preferences_gui.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stock_icons.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks_export.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks_items.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks_preferences_gui.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks_print.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks_utils.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils_date.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils_date_time.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils_gui.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils_time.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/about.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/backup.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_calc.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_fullyear.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_ical.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_jumpto.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_notes.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_preferences_gui.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_print.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_timeline.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_utils.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/calendar_widget.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/check_events.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_birthdays.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_export.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_import.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_import_csv.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_items.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/contacts_preferences_gui.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtksourceiter.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gui.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/notes.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/notes_items.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/notes_preferences_gui.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/options_prefs.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/preferences_gui.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stock_icons.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks_export.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks_items.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks_preferences_gui.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks_print.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tasks_utils.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils_date.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils_date_time.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils_gui.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils_time.Po@am__quote@ # am--include-marker + +$(am__depfiles_remade): + @$(MKDIR_P) $(@D) + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +am--depfiles: $(am__depfiles_remade) .c.o: -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< .c.obj: -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ + $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ @@ -450,15 +552,11 @@ $$unique; \ fi; \ fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique @@ -467,11 +565,29 @@ here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -distdir: $(DISTFILES) +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -543,7 +659,47 @@ clean-am: clean-binPROGRAMS clean-generic mostlyclean-am distclean: distclean-am - -rm -rf ./$(DEPDIR) + -rm -f ./$(DEPDIR)/about.Po + -rm -f ./$(DEPDIR)/backup.Po + -rm -f ./$(DEPDIR)/calendar.Po + -rm -f ./$(DEPDIR)/calendar_calc.Po + -rm -f ./$(DEPDIR)/calendar_fullyear.Po + -rm -f ./$(DEPDIR)/calendar_ical.Po + -rm -f ./$(DEPDIR)/calendar_jumpto.Po + -rm -f ./$(DEPDIR)/calendar_notes.Po + -rm -f ./$(DEPDIR)/calendar_preferences_gui.Po + -rm -f ./$(DEPDIR)/calendar_print.Po + -rm -f ./$(DEPDIR)/calendar_timeline.Po + -rm -f ./$(DEPDIR)/calendar_utils.Po + -rm -f ./$(DEPDIR)/calendar_widget.Po + -rm -f ./$(DEPDIR)/check_events.Po + -rm -f ./$(DEPDIR)/contacts.Po + -rm -f ./$(DEPDIR)/contacts_birthdays.Po + -rm -f ./$(DEPDIR)/contacts_export.Po + -rm -f ./$(DEPDIR)/contacts_import.Po + -rm -f ./$(DEPDIR)/contacts_import_csv.Po + -rm -f ./$(DEPDIR)/contacts_items.Po + -rm -f ./$(DEPDIR)/contacts_preferences_gui.Po + -rm -f ./$(DEPDIR)/gtksourceiter.Po + -rm -f ./$(DEPDIR)/gui.Po + -rm -f ./$(DEPDIR)/main.Po + -rm -f ./$(DEPDIR)/notes.Po + -rm -f ./$(DEPDIR)/notes_items.Po + -rm -f ./$(DEPDIR)/notes_preferences_gui.Po + -rm -f ./$(DEPDIR)/options_prefs.Po + -rm -f ./$(DEPDIR)/preferences_gui.Po + -rm -f ./$(DEPDIR)/stock_icons.Po + -rm -f ./$(DEPDIR)/tasks.Po + -rm -f ./$(DEPDIR)/tasks_export.Po + -rm -f ./$(DEPDIR)/tasks_items.Po + -rm -f ./$(DEPDIR)/tasks_preferences_gui.Po + -rm -f ./$(DEPDIR)/tasks_print.Po + -rm -f ./$(DEPDIR)/tasks_utils.Po + -rm -f ./$(DEPDIR)/utils.Po + -rm -f ./$(DEPDIR)/utils_date.Po + -rm -f ./$(DEPDIR)/utils_date_time.Po + -rm -f ./$(DEPDIR)/utils_gui.Po + -rm -f ./$(DEPDIR)/utils_time.Po -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags @@ -589,7 +745,47 @@ installcheck-am: maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) + -rm -f ./$(DEPDIR)/about.Po + -rm -f ./$(DEPDIR)/backup.Po + -rm -f ./$(DEPDIR)/calendar.Po + -rm -f ./$(DEPDIR)/calendar_calc.Po + -rm -f ./$(DEPDIR)/calendar_fullyear.Po + -rm -f ./$(DEPDIR)/calendar_ical.Po + -rm -f ./$(DEPDIR)/calendar_jumpto.Po + -rm -f ./$(DEPDIR)/calendar_notes.Po + -rm -f ./$(DEPDIR)/calendar_preferences_gui.Po + -rm -f ./$(DEPDIR)/calendar_print.Po + -rm -f ./$(DEPDIR)/calendar_timeline.Po + -rm -f ./$(DEPDIR)/calendar_utils.Po + -rm -f ./$(DEPDIR)/calendar_widget.Po + -rm -f ./$(DEPDIR)/check_events.Po + -rm -f ./$(DEPDIR)/contacts.Po + -rm -f ./$(DEPDIR)/contacts_birthdays.Po + -rm -f ./$(DEPDIR)/contacts_export.Po + -rm -f ./$(DEPDIR)/contacts_import.Po + -rm -f ./$(DEPDIR)/contacts_import_csv.Po + -rm -f ./$(DEPDIR)/contacts_items.Po + -rm -f ./$(DEPDIR)/contacts_preferences_gui.Po + -rm -f ./$(DEPDIR)/gtksourceiter.Po + -rm -f ./$(DEPDIR)/gui.Po + -rm -f ./$(DEPDIR)/main.Po + -rm -f ./$(DEPDIR)/notes.Po + -rm -f ./$(DEPDIR)/notes_items.Po + -rm -f ./$(DEPDIR)/notes_preferences_gui.Po + -rm -f ./$(DEPDIR)/options_prefs.Po + -rm -f ./$(DEPDIR)/preferences_gui.Po + -rm -f ./$(DEPDIR)/stock_icons.Po + -rm -f ./$(DEPDIR)/tasks.Po + -rm -f ./$(DEPDIR)/tasks_export.Po + -rm -f ./$(DEPDIR)/tasks_items.Po + -rm -f ./$(DEPDIR)/tasks_preferences_gui.Po + -rm -f ./$(DEPDIR)/tasks_print.Po + -rm -f ./$(DEPDIR)/tasks_utils.Po + -rm -f ./$(DEPDIR)/utils.Po + -rm -f ./$(DEPDIR)/utils_date.Po + -rm -f ./$(DEPDIR)/utils_date_time.Po + -rm -f ./$(DEPDIR)/utils_gui.Po + -rm -f ./$(DEPDIR)/utils_time.Po -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic @@ -609,18 +805,21 @@ .MAKE: install-am install-strip -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic ctags distclean distclean-compile \ - distclean-generic distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-binPROGRAMS \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-binPROGRAMS +.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \ + clean-binPROGRAMS clean-generic cscopelist-am ctags ctags-am \ + distclean distclean-compile distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-binPROGRAMS install-data install-data-am \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ + ps ps-am tags tags-am uninstall uninstall-am \ + uninstall-binPROGRAMS + +.PRECIOUS: Makefile dnl -DGDK_PIXBUF_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DG_DISABLE_CAST_CHECKS