untrusted comment: verify with openbsd-63-base.pub
RWRxzbLwAd76ZZtoEbk5ZDNq1WuiYA9mCPs9I6wTxjGdLG/6tLl8pgHsJqeUMiN0HehjPM5EYKWcwYLbr6Wb1RTMlXxDqe4vIQw=

OpenBSD 6.3 errata 024, November 29, 2018:

Various overflows exist in perl.

Apply by doing:
    signify -Vep /etc/signify/openbsd-63-base.pub -x 024_perl.patch.sig \
        -m - | (cd /usr/src && patch -p0)

And then rebuild and install perl:
    cd /usr/src/gnu/usr.bin/perl/
    make -f Makefile.bsd-wrapper obj
    make -f Makefile.bsd-wrapper depend
    make -f Makefile.bsd-wrapper
    make -f Makefile.bsd-wrapper install

Index: gnu/usr.bin/perl/regcomp.c
===================================================================
RCS file: /cvs/src/gnu/usr.bin/perl/regcomp.c,v
retrieving revision 1.24.2.1
diff -u -p -r1.24.2.1 regcomp.c
--- gnu/usr.bin/perl/regcomp.c	14 Apr 2018 19:06:19 -0000	1.24.2.1
+++ gnu/usr.bin/perl/regcomp.c	8 Nov 2018 01:50:17 -0000
@@ -11783,7 +11783,8 @@ S_grok_bslash_N(pTHX_ RExC_state_t *pREx
 
     RExC_parse++;	/* Skip past the '{' */
 
-    if (! (endbrace = strchr(RExC_parse, '}'))  /* no trailing brace */
+    endbrace = (char *) memchr(RExC_parse, '}', RExC_end - RExC_parse);
+    if ((! endbrace) /* no trailing brace */
 	|| ! (endbrace == RExC_parse		/* nothing between the {} */
               || (endbrace - RExC_parse >= 2	/* U+ (bad hex is checked... */
                   && strnEQ(RExC_parse, "U+", 2)))) /* ... below for a better
@@ -12483,9 +12484,11 @@ S_regatom(pTHX_ RExC_state_t *pRExC_stat
             else {
                 STRLEN length;
                 char name = *RExC_parse;
-                char * endbrace;
+                char * endbrace = NULL;
                 RExC_parse += 2;
-                endbrace = strchr(RExC_parse, '}');
+                if (RExC_parse < RExC_end) {
+                    endbrace = (char *) memchr(RExC_parse, '}', RExC_end - RExC_parse);
+                }
 
                 if (! endbrace) {
                     vFAIL2("Missing right brace on \\%c{}", name);
@@ -14606,8 +14609,9 @@ S_handle_regex_sets(pTHX_ RExC_state_t *
                                     TRUE /* Force /x */ );
 
             switch (*RExC_parse) {
-                case '?':
-                    if (RExC_parse[1] == '[') depth++, RExC_parse++;
+                case '(':
+                    if (RExC_parse[1] == '?' && RExC_parse[2] == '[')
+                        depth++, RExC_parse+=2;
                     /* FALLTHROUGH */
                 default:
                     break;
@@ -14664,9 +14668,9 @@ S_handle_regex_sets(pTHX_ RExC_state_t *
                 }
 
                 case ']':
-                    if (depth--) break;
-                    RExC_parse++;
-                    if (*RExC_parse == ')') {
+                    if (RExC_parse[1] == ')') {
+                        RExC_parse++;
+                        if (depth--) break;
                         node = reganode(pRExC_state, ANYOF, 0);
                         RExC_size += ANYOF_SKIP;
                         nextchar(pRExC_state);
@@ -14678,20 +14682,25 @@ S_handle_regex_sets(pTHX_ RExC_state_t *
 
                         return node;
                     }
-                    goto no_close;
+                    /* We output the messages even if warnings are off, because we'll fail
+                     * the very next thing, and these give a likely diagnosis for that */
+                    if (posix_warnings && (__ASSERT_(SvTYPE(posix_warnings) == SVt_PVAV) AvFILLp(posix_warnings)) >= 0) {
+                        output_or_return_posix_warnings(pRExC_state, posix_warnings, NULL);
+                    }
+                    RExC_parse++;
+                    vFAIL("Unexpected ']' with no following ')' in (?[...");
             }
 
             RExC_parse += UTF ? UTF8SKIP(RExC_parse) : 1;
         }
 
-      no_close:
         /* We output the messages even if warnings are off, because we'll fail
          * the very next thing, and these give a likely diagnosis for that */
         if (posix_warnings && av_tindex_nomg(posix_warnings) >= 0) {
             output_or_return_posix_warnings(pRExC_state, posix_warnings, NULL);
         }
 
-        FAIL("Syntax error in (?[...])");
+        vFAIL("Syntax error in (?[...])");
     }
 
     /* Pass 2 only after this. */
@@ -14865,14 +14874,15 @@ redo_curchar:
                      * inversion list, and RExC_parse points to the trailing
                      * ']'; the next character should be the ')' */
                     RExC_parse++;
-                    assert(UCHARAT(RExC_parse) == ')');
+                    if (UCHARAT(RExC_parse) != ')')
+                        vFAIL("Expecting close paren for nested extended charclass");
 
                     /* Then the ')' matching the original '(' handled by this
                      * case: statement */
                     RExC_parse++;
-                    assert(UCHARAT(RExC_parse) == ')');
+                    if (UCHARAT(RExC_parse) != ')')
+                        vFAIL("Expecting close paren for wrapper for nested extended charclass");
 
-                    RExC_parse++;
                     RExC_flags = save_flags;
                     goto handle_operand;
                 }
@@ -15938,7 +15948,7 @@ S_regclass(pTHX_ RExC_state_t *pRExC_sta
 		    vFAIL2("Empty \\%c", (U8)value);
 		if (*RExC_parse == '{') {
 		    const U8 c = (U8)value;
-		    e = strchr(RExC_parse, '}');
+		    e = (char *) memchr(RExC_parse, '}', RExC_end - RExC_parse);
                     if (!e) {
                         RExC_parse++;
                         vFAIL2("Missing right brace on \\%c{}", c);
Index: gnu/usr.bin/perl/util.c
===================================================================
RCS file: /cvs/src/gnu/usr.bin/perl/util.c,v
retrieving revision 1.30
diff -u -p -r1.30 util.c
--- gnu/usr.bin/perl/util.c	29 Oct 2017 22:38:45 -0000	1.30
+++ gnu/usr.bin/perl/util.c	8 Nov 2018 01:50:18 -0000
@@ -2160,8 +2160,40 @@ Perl_new_warnings_bitfield(pTHX_ STRLEN 
    *(s+(nlen+1+vlen)) = '\0'
 
 #ifdef USE_ENVIRON_ARRAY
-       /* VMS' my_setenv() is in vms.c */
+
+/* small wrapper for use by Perl_my_setenv that mallocs, or reallocs if
+ * 'current' is non-null, with up to three sizes that are added together.
+ * It handles integer overflow.
+ */
+static char *
+S_env_alloc(void *current, Size_t l1, Size_t l2, Size_t l3, Size_t size)
+{
+    void *p;
+    Size_t sl, l = l1 + l2;
+
+    if (l < l2)
+        goto panic;
+    l += l3;
+    if (l < l3)
+        goto panic;
+    sl = l * size;
+    if (sl < l)
+        goto panic;
+
+    p = current
+            ? safesysrealloc(current, sl)
+            : safesysmalloc(sl);
+    if (p)
+        return (char*)p;
+
+  panic:
+    croak_memory_wrap();
+}
+
+
+/* VMS' my_setenv() is in vms.c */
 #if !defined(WIN32) && !defined(NETWARE)
+
 void
 Perl_my_setenv(pTHX_ const char *nam, const char *val)
 {
@@ -2177,28 +2209,27 @@ Perl_my_setenv(pTHX_ const char *nam, co
 #ifndef PERL_USE_SAFE_PUTENV
     if (!PL_use_safe_putenv) {
         /* most putenv()s leak, so we manipulate environ directly */
-        I32 i;
-        const I32 len = strlen(nam);
-        int nlen, vlen;
+        UV i;
+        Size_t vlen, nlen = strlen(nam);
 
         /* where does it go? */
         for (i = 0; environ[i]; i++) {
-            if (strnEQ(environ[i],nam,len) && environ[i][len] == '=')
+            if (strnEQ(environ[i], nam, nlen) && environ[i][nlen] == '=')
                 break;
         }
 
         if (environ == PL_origenviron) {   /* need we copy environment? */
-            I32 j;
-            I32 max;
+            UV j, max;
             char **tmpenv;
 
             max = i;
             while (environ[max])
                 max++;
-            tmpenv = (char**)safesysmalloc((max+2) * sizeof(char*));
+            /* XXX shouldn't that be max+1 rather than max+2 ??? - DAPM */
+            tmpenv = (char**)S_env_alloc(NULL, max, 2, 0, sizeof(char*));
             for (j=0; j<max; j++) {         /* copy environment */
-                const int len = strlen(environ[j]);
-                tmpenv[j] = (char*)safesysmalloc((len+1)*sizeof(char));
+                const Size_t len = strlen(environ[j]);
+                tmpenv[j] = S_env_alloc(NULL, len, 1, 0, 1);
                 Copy(environ[j], tmpenv[j], len+1, char);
             }
             tmpenv[max] = NULL;
@@ -2217,15 +2248,15 @@ Perl_my_setenv(pTHX_ const char *nam, co
 #endif
         }
         if (!environ[i]) {                 /* does not exist yet */
-            environ = (char**)safesysrealloc(environ, (i+2) * sizeof(char*));
+            environ = (char**)S_env_alloc(environ, i, 2, 0, sizeof(char*));
             environ[i+1] = NULL;    /* make sure it's null terminated */
         }
         else
             safesysfree(environ[i]);
-        nlen = strlen(nam);
+
         vlen = strlen(val);
 
-        environ[i] = (char*)safesysmalloc((nlen+vlen+2) * sizeof(char));
+        environ[i] = S_env_alloc(NULL, nlen, vlen, 2, 1);
         /* all that work just for this */
         my_setenv_format(environ[i], nam, nlen, val, vlen);
     } else {
@@ -2250,22 +2281,21 @@ Perl_my_setenv(pTHX_ const char *nam, co
             if (environ) /* old glibc can crash with null environ */
                 (void)unsetenv(nam);
         } else {
-	    const int nlen = strlen(nam);
-	    const int vlen = strlen(val);
-	    char * const new_env =
-                (char*)safesysmalloc((nlen + vlen + 2) * sizeof(char));
+           const Size_t nlen = strlen(nam);
+           const Size_t vlen = strlen(val);
+           char * const new_env = S_env_alloc(NULL, nlen, vlen, 2, 1);                                                
             my_setenv_format(new_env, nam, nlen, val, vlen);
             (void)putenv(new_env);
         }
 #       else /* ! HAS_UNSETENV */
         char *new_env;
-	const int nlen = strlen(nam);
-	int vlen;
+        const Size_t nlen = strlen(nam);
+        Size_t vlen;
         if (!val) {
 	   val = "";
         }
         vlen = strlen(val);
-        new_env = (char*)safesysmalloc((nlen + vlen + 2) * sizeof(char));
+        new_env = S_env_alloc(NULL, nlen, vlen, 2, 1);
         /* all that work just for this */
         my_setenv_format(new_env, nam, nlen, val, vlen);
         (void)putenv(new_env);
@@ -2288,14 +2318,14 @@ Perl_my_setenv(pTHX_ const char *nam, co
 {
     dVAR;
     char *envstr;
-    const int nlen = strlen(nam);
-    int vlen;
+    const Size_t nlen = strlen(nam);
+    Size_t vlen;
 
     if (!val) {
        val = "";
     }
     vlen = strlen(val);
-    Newx(envstr, nlen+vlen+2, char);
+    envstr = S_env_alloc(NULL, nlen, vlen, 2, 1);
     my_setenv_format(envstr, nam, nlen, val, vlen);
     (void)PerlEnv_putenv(envstr);
     Safefree(envstr);
Index: gnu/usr.bin/perl/pod/perldiag.pod
===================================================================
RCS file: /cvs/src/gnu/usr.bin/perl/pod/perldiag.pod,v
retrieving revision 1.20
diff -u -p -r1.20 perldiag.pod
--- gnu/usr.bin/perl/pod/perldiag.pod	29 Oct 2017 22:37:23 -0000	1.20
+++ gnu/usr.bin/perl/pod/perldiag.pod	8 Nov 2018 01:50:20 -0000
@@ -5777,7 +5777,7 @@ yourself.
 a perl4 interpreter, especially if the next 2 tokens are "use strict"
 or "my $var" or "our $var".
 
-=item Syntax error in (?[...]) in regex m/%s/
+=item Syntax error in (?[...]) in regex; marked by <-- HERE in m/%s/
 
 (F) Perl could not figure out what you meant inside this construct; this
 notifies you that it is giving up trying.
@@ -6152,6 +6152,31 @@ for example,
 
 (F) The unexec() routine failed for some reason.  See your local FSF
 representative, who probably put it there in the first place.
+
+=item Unexpected ']' with no following ')' in (?[... in regex; marked by <-- HERE in m/%s/
+
+(F) While parsing an extended character class a ']' character was encountered
+at a point in the definition where the only legal use of ']' is to close the
+character class definition as part of a '])', you may have forgotten the close
+paren, or otherwise confused the parser.
+
+=item Expecting close paren for nested extended charclass in regex; marked by <-- HERE in m/%s/
+
+(F) While parsing a nested extended character class like:
+
+    (?[ ... (?flags:(?[ ... ])) ... ])
+                             ^
+
+we expected to see a close paren ')' (marked by ^) but did not.
+
+=item Expecting close paren for wrapper for nested extended charclass in regex; marked by <-- HERE in m/%s/
+
+(F) While parsing a nested extended character class like:
+
+    (?[ ... (?flags:(?[ ... ])) ... ])
+                              ^
+
+we expected to see a close paren ')' (marked by ^) but did not.
 
 =item Unexpected binary operator '%c' with no preceding operand in regex;
 marked by S<<-- HERE> in m/%s/
Index: gnu/usr.bin/perl/pod/perlrecharclass.pod
===================================================================
RCS file: /cvs/src/gnu/usr.bin/perl/pod/perlrecharclass.pod,v
retrieving revision 1.3
diff -u -p -r1.3 perlrecharclass.pod
--- gnu/usr.bin/perl/pod/perlrecharclass.pod	29 Oct 2017 22:37:23 -0000	1.3
+++ gnu/usr.bin/perl/pod/perlrecharclass.pod	8 Nov 2018 01:50:20 -0000
@@ -1101,8 +1101,8 @@ hence both of the following work:
 Any contained POSIX character classes, including things like C<\w> and C<\D>
 respect the C<E<sol>a> (and C<E<sol>aa>) modifiers.
 
-C<< (?[ ]) >> is a regex-compile-time construct.  Any attempt to use
-something which isn't knowable at the time the containing regular
+Note that C<< (?[ ]) >> is a regex-compile-time construct.  Any attempt
+to use something which isn't knowable at the time the containing regular
 expression is compiled is a fatal error.  In practice, this means
 just three limitations:
 
Index: gnu/usr.bin/perl/t/lib/warnings/regcomp
===================================================================
RCS file: /cvs/src/gnu/usr.bin/perl/t/lib/warnings/regcomp,v
retrieving revision 1.2
diff -u -p -r1.2 regcomp
--- gnu/usr.bin/perl/t/lib/warnings/regcomp	5 Feb 2017 00:32:20 -0000	1.2
+++ gnu/usr.bin/perl/t/lib/warnings/regcomp	8 Nov 2018 01:50:20 -0000
@@ -59,21 +59,21 @@ Unmatched [ in regex; marked by <-- HERE
 qr/(?[[[:word]]])/;
 EXPECT
 Assuming NOT a POSIX class since there is no terminating ':' in regex; marked by <-- HERE in m/(?[[[:word <-- HERE ]]])/ at - line 2.
-syntax error in (?[...]) in regex m/(?[[[:word]]])/ at - line 2.
+Unexpected ']' with no following ')' in (?[... in regex; marked by <-- HERE in m/(?[[[:word]] <-- HERE ])/ at - line 2.
 ########
 # NAME qr/(?[ [[:digit: ])/
 # OPTION fatal
 qr/(?[[[:digit: ])/;
 EXPECT
 Assuming NOT a POSIX class since no blanks are allowed in one in regex; marked by <-- HERE in m/(?[[[:digit: ] <-- HERE )/ at - line 2.
-syntax error in (?[...]) in regex m/(?[[[:digit: ])/ at - line 2.
+syntax error in (?[...]) in regex; marked by <-- HERE in m/(?[[[:digit: ]) <-- HERE / at - line 2.
 ########
 # NAME qr/(?[ [:digit: ])/
 # OPTION fatal
 qr/(?[[:digit: ])/
 EXPECT
 Assuming NOT a POSIX class since no blanks are allowed in one in regex; marked by <-- HERE in m/(?[[:digit: ] <-- HERE )/ at - line 2.
-syntax error in (?[...]) in regex m/(?[[:digit: ])/ at - line 2.
+syntax error in (?[...]) in regex; marked by <-- HERE in m/(?[[:digit: ]) <-- HERE / at - line 2.
 ########
 # NAME [perl #126141]
 # OPTION fatal
Index: gnu/usr.bin/perl/t/re/reg_mesg.t
===================================================================
RCS file: /cvs/src/gnu/usr.bin/perl/t/re/reg_mesg.t,v
retrieving revision 1.4
diff -u -p -r1.4 reg_mesg.t
--- gnu/usr.bin/perl/t/re/reg_mesg.t	29 Oct 2017 22:37:24 -0000	1.4
+++ gnu/usr.bin/perl/t/re/reg_mesg.t	8 Nov 2018 01:50:20 -0000
@@ -200,8 +200,9 @@ my @death =
  '/\b{gc}/' => "'gc' is an unknown bound type {#} m/\\b{gc{#}}/",
  '/\B{gc}/' => "'gc' is an unknown bound type {#} m/\\B{gc{#}}/",
 
- '/(?[[[::]]])/' => "Syntax error in (?[...]) in regex m/(?[[[::]]])/",
- '/(?[[[:w:]]])/' => "Syntax error in (?[...]) in regex m/(?[[[:w:]]])/",
+
+ '/(?[[[::]]])/' => "Unexpected ']' with no following ')' in (?[... {#} m/(?[[[::]]{#}])/",
+ '/(?[[[:w:]]])/' => "Unexpected ']' with no following ')' in (?[... {#} m/(?[[[:w:]]{#}])/",
  '/(?[[:w:]])/' => "",
  '/[][[:alpha:]]' => "",    # [perl #127581]
  '/([.].*)[.]/'   => "",    # [perl #127582]
@@ -225,11 +226,12 @@ my @death =
  '/(?[ \p{foo} ])/' => 'Can\'t find Unicode property definition "foo" {#} m/(?[ \p{foo}{#} ])/',
  '/(?[ \p{ foo = bar } ])/' => 'Can\'t find Unicode property definition "foo = bar" {#} m/(?[ \p{ foo = bar }{#} ])/',
  '/(?[ \8 ])/' => 'Unrecognized escape \8 in character class {#} m/(?[ \8{#} ])/',
- '/(?[ \t ]/' => 'Syntax error in (?[...]) in regex m/(?[ \t ]/',
- '/(?[ [ \t ]/' => 'Syntax error in (?[...]) in regex m/(?[ [ \t ]/',
- '/(?[ \t ] ]/' => 'Syntax error in (?[...]) in regex m/(?[ \t ] ]/',
- '/(?[ [ ] ]/' => 'Syntax error in (?[...]) in regex m/(?[ [ ] ]/',
- '/(?[ \t + \e # This was supposed to be a comment ])/' => 'Syntax error in (?[...]) in regex m/(?[ \t + \e # This was supposed to be a comment ])/',
+ '/(?[ \t ]/' => "Unexpected ']' with no following ')' in (?[... {#} m/(?[ \\t ]{#}/",
+ '/(?[ [ \t ]/' => "Syntax error in (?[...]) {#} m/(?[ [ \\t ]{#}/",
+ '/(?[ \t ] ]/' => "Unexpected ']' with no following ')' in (?[... {#} m/(?[ \\t ]{#} ]/",
+ '/(?[ [ ] ]/' => "Syntax error in (?[...]) {#} m/(?[ [ ] ]{#}/",
+ '/(?[ \t + \e # This was supposed to be a comment ])/' =>
+    "Syntax error in (?[...]) {#} m/(?[ \\t + \\e # This was supposed to be a comment ]){#}/",
  '/(?[ ])/' => 'Incomplete expression within \'(?[ ])\' {#} m/(?[ {#}])/',
  'm/(?[[a-\d]])/' => 'False [] range "a-\d" {#} m/(?[[a-\d{#}]])/',
  'm/(?[[\w-x]])/' => 'False [] range "\w-" {#} m/(?[[\w-{#}x]])/',
@@ -405,10 +407,10 @@ my @death_utf8 = mark_as_utf8(
 
  '/ネ\p{}ネ/' => 'Empty \p{} {#} m/ネ\p{{#}}ネ/',
 
- '/ネ(?[[[:ネ]]])ネ/' => "Syntax error in (?[...]) in regex m/ネ(?[[[:ネ]]])ネ/",
- '/ネ(?[[[:ネ: ])ネ/' => "Syntax error in (?[...]) in regex m/ネ(?[[[:ネ: ])ネ/",
- '/ネ(?[[[::]]])ネ/' => "Syntax error in (?[...]) in regex m/ネ(?[[[::]]])ネ/",
- '/ネ(?[[[:ネ:]]])ネ/' => "Syntax error in (?[...]) in regex m/ネ(?[[[:ネ:]]])ネ/",
+ '/ネ(?[[[:ネ]]])ネ/' => "Unexpected ']' with no following ')' in (?[... {#} m/ネ(?[[[:ネ]]{#}])ネ/",
+ '/ネ(?[[[:ネ: ])ネ/' => "Syntax error in (?[...]) {#} m/ネ(?[[[:ネ: ])ネ{#}/",
+ '/ネ(?[[[::]]])ネ/' => "Unexpected ']' with no following ')' in (?[... {#} m/ネ(?[[[::]]{#}])ネ/",
+ '/ネ(?[[[:ネ:]]])ネ/' => "Unexpected ']' with no following ')' in (?[... {#} m/ネ(?[[[:ネ:]]{#}])ネ/",
  '/ネ(?[[:ネ:]])ネ/' => "",
  '/ネ(?[ネ])ネ/' =>  'Unexpected character {#} m/ネ(?[ネ{#}])ネ/',
  '/ネ(?[ + [ネ] ])/' => 'Unexpected binary operator \'+\' with no preceding operand {#} m/ネ(?[ +{#} [ネ] ])/',
@@ -421,8 +423,9 @@ my @death_utf8 = mark_as_utf8(
  '/(?[ \x{ネ} ])ネ/' => 'Non-hex character {#} m/(?[ \x{ネ{#}} ])ネ/',
  '/(?[ \p{ネ} ])/' => 'Can\'t find Unicode property definition "ネ" {#} m/(?[ \p{ネ}{#} ])/',
  '/(?[ \p{ ネ = bar } ])/' => 'Can\'t find Unicode property definition "ネ = bar" {#} m/(?[ \p{ ネ = bar }{#} ])/',
- '/ネ(?[ \t ]/' => 'Syntax error in (?[...]) in regex m/ネ(?[ \t ]/',
- '/(?[ \t + \e # ネ This was supposed to be a comment ])/' => 'Syntax error in (?[...]) in regex m/(?[ \t + \e # ネ This was supposed to be a comment ])/',
+ '/ネ(?[ \t ]/' => "Unexpected ']' with no following ')' in (?[... {#} m/ネ(?[ \\t ]{#}/",
+ '/(?[ \t + \e # ネ This was supposed to be a comment ])/' =>
+    "Syntax error in (?[...]) {#} m/(?[ \\t + \\e # ネ This was supposed to be a comment ]){#}/",
  'm/(*ネ)ネ/' => q<Unknown verb pattern 'ネ' {#} m/(*ネ){#}ネ/>,
  '/\cネ/' => "Character following \"\\c\" must be printable ASCII",
  '/\b{ネ}/' => "'ネ' is an unknown bound type {#} m/\\b{ネ{#}}/",
Index: gnu/usr.bin/perl/t/re/regex_sets.t
===================================================================
RCS file: /cvs/src/gnu/usr.bin/perl/t/re/regex_sets.t,v
retrieving revision 1.3
diff -u -p -r1.3 regex_sets.t
--- gnu/usr.bin/perl/t/re/regex_sets.t	29 Oct 2017 22:37:24 -0000	1.3
+++ gnu/usr.bin/perl/t/re/regex_sets.t	8 Nov 2018 01:50:20 -0000
@@ -157,13 +157,13 @@ for my $char ("٠", "٥", "٩") {
 	eval { $_ = '/(?[(\c]) /'; qr/$_/ };
 	like($@, qr/^Syntax error/, '/(?[(\c]) / should not panic');
 	eval { $_ = '(?[\c#]' . "\n])"; qr/$_/ };
-	like($@, qr/^Syntax error/, '/(?[(\c]) / should not panic');
+	like($@, qr/^Unexpected/, '/(?[(\c]) / should not panic');
 	eval { $_ = '(?[(\c])'; qr/$_/ };
 	like($@, qr/^Syntax error/, '/(?[(\c])/ should be a syntax error');
 	eval { $_ = '(?[(\c]) ]\b'; qr/$_/ };
-	like($@, qr/^Syntax error/, '/(?[(\c]) ]\b/ should be a syntax error');
+	like($@, qr/^Unexpected/, '/(?[(\c]) ]\b/ should be a syntax error');
 	eval { $_ = '(?[\c[]](])'; qr/$_/ };
-	like($@, qr/^Syntax error/, '/(?[\c[]](])/ should be a syntax error');
+	like($@, qr/^Unexpected/, '/(?[\c[]](])/ should be a syntax error');
 	like("\c#", qr/(?[\c#])/, '\c# should match itself');
 	like("\c[", qr/(?[\c[])/, '\c[ should match itself');
 	like("\c\ ", qr/(?[\c\])/, '\c\ should match itself');