|This article is available in: English Castellano Deutsch Francais Nederlands Portugues Russian Turkce|
by Luis Colorado
Shared Libraries allow you to efficently re-use code between
This process consists of the following steps:
Initially, programs were written directly in machine code. Later, it was realized that writing a program in a higher level language and its subsequent translation to machine code could be automated due to the systematic nature of the translation. This increased the productivity of software.
Upon achievement of the compilation of programs (I have simplified the evolution of compilation, actually this was a very difficult step to take because it is a very complex process), the process of program generation consisted of generating a file with the program source, compiling it and executing it as a final step.
It was soon noticed, however, that the process of compilation was very expensive and took too many resources, including CPU time, and that many functions included by those programs were used over and over in various programs. Moreover, when somebody modified part of a program, this meant compiling the whole source again, including translating once again a whole bunch of identical code in order to compile the new code inserted.
That was the reason for introducing the compilation by modules. This consists of separating to one side the main program, and to the other side, those functions that are frequently used over and over, and which were already compiled and archived in a special place (we will call it the precursor of a library).
One could then develop programs supported by those functions
without expending additional effort introducing their code
again and again. Even then, the process was complex because
when linking the program it was necessary to join all the
pieces and these had to be identified by the programmer (this
added the additional cost of perhaps using a known function
that uses/needs other unknown functions)
The library such as we have discussed so far, has not evolved much more that this. It has only acquired a new special file, that often appears at the beginning of the archive and that contains a description of the modules and the identifiers that the linker has to resolve without having to read the whole library (and thus removing the need to read the library several times). This process (adding the table of symbols to the library archive) is performed under Linux by the command ranlib(1). The libraries described thus far are known as STATIC LIBRARIES.
An advancement occurred after the introduction of the first multitasking systems: the sharing of code. If, in the same system, two copies of the same code were launched, it appeared interesting that two processes could share code because normally a program does not modify its own code. This idea eliminates the need for having multiple copies in memory which saves large amounts of memory on huge multi-user systems.
Taking this last innovation one step further, someone (I do not know who he/she was but the idea was great ;-) thought that quite often many programs used the same library, but being different programs, the portion of the library used by a program did not have to be the same as the portion used in other program. Moreover the main code was not the same (they were different programs), so their text were not shared. Well, our person had thought that if different programs using the same library could share the code of such a library we could save some memory. Now different programs share the library code, without having identical program text.
However, now the process is more complex. The executable program is not fully linked, but the referencing to identifiers of the library are postponed for the process of program loading. The linker (in the case of Linux is ld(1)) recognizes that it is dealing with a shared library and does not include its code in the program. The system itself, the kernel, when executing exec() recognizes that it is launching a program using shared libraries and it runs a special code for loading the shared libraries (assigning shared memory for its text, assigning private memory for the values of the library, etc.). This process is performed now when loading an executable and the whole procedure is much more complex.
Off course, when the linker is faced with a normal library it continues to behave as before.
The shared library is not an archive of files containing
object code, but more like a file containing object code by
itself. During linking of a program with a shared library, the
linker does not inquire inside the library for which modules
must be added to the program and which not It only makes sure
that the unresolved references get resolved and detects which
must be added to the list by the inclusion of the library. One
could make an archive ar(1) library of all the shared
libraries, but this is not often done because a shared library
is often the result of linking various modules so that the
library is necessary later, during run-time. Perhaps, the name
shared library is not the most appropriate and it would be more
clear to call it shared object (nevertheless, we will not use
this other term in order to be understood).
The shared libraries, by contrast, are not archives but
reallocable objects, marked by a special code (that identifies
them as shared libraries). The linker ld(1), as mentioned, does
not add the modules to the program code, but selects the
identifiers provided by the library as resolved, adds those
needed by the library itself and continues without adding any
code, pretending the code in question has been added already to
the main code. The linker ld(1) recognized a shared library by
having the termination .so (not .so.xxx.yyy, and we will come
back to this point).
ld(1) supports several options that modifies its behavior, but we will restrict ourselves here to those options related with the use of libraries in general. ld(1) is not invoked directly by the user but by the compiler itself gcc(1) in its final stage. A superficial knowledge about its modus operandis helps will help us understand the use of libraries under Linux.
ld(1) requires for its proper functioning the list of objects that are going to be linked to the program. These objects can be given and called in any order(*) as long as we follow the previous convention, as mentioned, that a shared library is indicated by a termination .so (not .so.xx.yy) and a static library by .a (and of course, simple object files are those whose names terminate in .o).
(*) This is not completely true. ld(1) includes only those modules that resolve the references at the moment of including the library, then there could still be a reference originated by a module included later that, since it does not appear yet in the moment of including this library, can cause the order of inclusion of the libraries to be significant.
On the other hand, ld(1) allows the inclusion of standard libraries thanks to the options -l and -L.
But... What do we understand by a standard library, what is the difference? None. Only that ld(1) searches for the standard libraries in predetermined locations while those appearing as object in the list of parameters are searched using their filename.
The libraries are searched by default in the directories /lib and /usr/lib (although I have heard that according to the version/ implementation of ld(1) there could be additional places). -L allows us to add directories to those used for the normal search of libraries. It is used by writing one -L directory for each directory we want to add. The standard libraries are specified with the option -l Name (where Name specifies the library to be loaded) and ld(1) will search, in order, in the corresponding directories, a filename libName.so. If not found it will try for libName.a., its static version
If ld(1) finds a libName.so file, it links it as if
it was a shared library, while if it finds a file libName.a, it
will link the modules obtained from this if they resolved any
of the unresolved references.
Actually the are two modules for linking with dynamic libraries: /lib/ld.so (for libraries using the old a.out format) and /lib/ld-linux.so (for libraries using the new ELF format).
These modules are special, in that they must be loaded each time a program is linked dynamically. Their names are standard ( the reason they are not to be moved from the directory /lib, nor are their names to be modified). If we changed the name of /etc/ld-linux.so, we would automatically halt the use of any program using shared libraries because this module takes charge of resolving all the references not yet resolved at run-time.
The last module is helped by the existence of a file,
/etc/ld.so.cache, who indicates, for every library,
the most appropriate executable file that contains the library.
We will return to this issue later.
A message often received is 'library libX11.so.3 not found,' leaving us with the frustration of having the library libX11.so.6 and incapable of doing anything. How is it possible that ld.so(8) recognizes as interchangeable the libraries libpepe.so.45.0.1 and libpepe.so.45.22.3 and does not recognize libpepe.so.46.22.3?
Under Linux (and all the operating systems implementing the ELF format) the libraries are identified by a sequence of characters that distinguish them: the soname.
The soname is included inside the library itself and the sequence is determined when linking the objects forming the library. When the shared library is created, one has to pass to ld(1) an option (-soname <name_of_the_library>), to give a value to this character string.
This sequence of characters is used by the dynamic loader to
identify the shared library that must be loaded and to identify
the executable. The process is like this:
Ld-linux.so detects that the program requires a library and determines its soname. Then comes /etc/ld.so.cache with such a name and obtains the name of the file containing it. Next it compares the soname requested with the name existing in the library and if they are identical that's it! If they are not, it will continue searching until it finds it or if it cannot, it reports an error.
The soname can detect if a library is the appropriate one to be loaded because ld-linux.so makes sure that the soname requested coincides with the file requested. In case of disagreement we obtain the famous 'libXXX.so.Y' not found. What it is looking for is the soname and the error given refers to the soname.
This can cause a lot of confusion when we change the name of a library and the problem persists. But it is not a good idea to access the soname and change it because there is a convention in the Linux community for assigning soname:
The soname of a library, by convention, must identify the appropriate library and the INTERFACE of such library. If we perform modifications of a library that only affect their internal functioning, but the whole interface is intact (number of functions, variables, parameters of the functions) then the two libraries will be interchangeable and in general, we will say that the modifications introduced are minor (both libraries are compatible and we can replace one for the other. When this happens the minor number is often modified (which does not appear in the soname) and the library can be replaced without mayor problems.
However, when we add functions, remove functions, and in
general, MODIFY THE INTERFACE of the library, then is not
possible to maintain that the library as interchangeable with
the previous one (for example substituting libX11.so.3
with libX11.so.6 is part of the upgrade from X11R5 to
X11R6 which defines new functions and therefore modifies the
interface). The change from X11R6-v3.1.2 to X11R6-v3.1.3
probably will not include changes in the interface and the
library will have the same soname--although in order to
preserve the old one we must give it a different name (for this
reason the version number appears complete in the name of the
library while only the major number shows in the soname).
The shared library is fully loaded in memory (not only the modules needed) therefore, to be useful, it must be useful in its totality. The worse example of a dynamic library is where only a function is used and 90% of the library is hardly ever used.
A good example of dynamic library is the C standard library (it is used by all the programs written in C). On average all the functions are used here and there.
In a static library it is unnecessary to include functions
whose usage is infrequent; as long as those functions are
contained in their own module, they will not be linked in to
those programs that do not required them.
This step is fundamental because in a statically linked program, the position of the library objects are resolved at link-time, therefore at a fixed time. In the old a.out executables, it was impossible to performed this step, resulting in each shared library getting placed at a fixed position in the space of virtual addresses. As a consequence, there were conflicts anytime a program wanted to use two libraries and loaded them in overlapping regions of virtual memory. This meant you were forced to maintain a list, where whenever someone wanted to make a library dynamic, one would declare the range of addresses used so that nobody else would use it.
Well, as we mentioned, registering a dynamic library in an
official list is not necessary because when the library is
loaded, it goes to positions determined at that given instant,
despite that fact that the code must be rellocable.
gcc -shared -o libName.so.xxx.yyy.zzz -Wl,-soname,libName.so.xxxAs the reader can appreciate, it looks like a normal link operation, except for the introduction of a series of options that will lead to the generation of a shared library. Let us explain them one by one:
-soname libName.so.xxxThis option fixes the soname of the library so that it can only be invoked by those programs that require a library with the soname specified.
To compile a program that requires our new library, one would use the following line:
gcc -o program libName.so.xxx.yyy.zzzor if the library has been installed in the appropriate place (/usr/lib), it would be sufficient with:
gcc -o program -lName(were the library in /usr/local/lib instead then it would have been sufficient to add the option '-L/usr/local/lib'). To install the library, do the following:
Note: The linker, in its search for libraries, looks first a file called libName.so, followed by libName.a. If we call the two libraries (the static and dynamic versions) by the same name, it will not be possible to determine, in general, which of the two will get linked in each case (the dynamic always gets linked first when it is found first).
For this reason it is always recommended that if the two versions of the same library are needed, the static one be named as libName_s.a, while the dynamic is named libName.so. When linking, therefore, one would do:
gcc -o program -lName_sto link with the static version, while in the case of the dynamic one:
gcc -o program -lName
The process of linking allows the introduction of the option
-static. This option controls the loading of the module
/lib/ld-linux.so, and does not affect the search order
of the libraries, so that if one writes -static and
ld(1) finds a dynamic library, it will continue to
work with it (instead of continuing looking for its static
counterpart). This leads to errors at run-time due to the
invocation of routines in a library that do not belong to the
executable -- the module for automatic dynamic loading is not
linked and therefore this process can not be carried out.
To produce this kind of software there are two options. The first is making an executable statically linked (using only .a libraries and avoiding the use of the dynamic loader). These kinds of programs are loaded only once and do not require having any library installed in the system (not even /lib/ld-linux.so). However they have the disadvantage of a carrying all the software necessary within the binary file and therefore they are usually huge files. The second option is to make a dynamically linked program, meaning that the environment where our application will run should provide all the corresponding dynamic libraries. The executable may be very small although some times it is not possible to have all the libraries available (for example, there are people who do not have Motif).
There is a third option, a mixed distribution, in which some libraries are linked dynamically and others statically. In this case, logically one would choose the conflictive library in its static form and all the others in their dynamic form. This option is a very convenient form for software distribution.
For example, one could compile three different versions of a program as follows:
gcc -static -o program.static program.o -lm_s -lXm_s -lXt_s -lX11_s\ -lXmu_s -lXpm_s gcc -o program.dynamic program.o -lm -lXm -lXt -lX11 -lXmu -lXpm gcc -o program.mixed program.o -lm -lXm_s -lXt -lX11 -lXmu -lXpmIn the third case, only the Motif library Motif (-lXm_s) gets linked statically, and all the others are linked dynamically. The environment where the program runs must provide the appropriate versions of the libraries libm.so.xx libXt.so.xx libX11.so.xx libXmu.so.xx y libXpm.so.xx
Webpages maintained by the LinuxFocus Editor team
© Luis Colorado, FDL
2002-10-28, generated by lfparser version 2.33